129,238 used machines on RESALE, but how to find them? Machine Search
Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph
Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993
Holtec parcel cross-cut saw Type: VARIOCUT SHK Year of Make: 1989 Parcel cross-cut saw with movable parcel roller conveyor Positioning control with length input with measuring point Stationary cross-cut unit Cutting width 1300 mm Package height 1200 mm Highest cutting accuracy thanks to saw set guided on both sides Input roller conveyor 5400 mm long Forward / return 2 speeds With 12 wheels Output roller conveyor 5000 mm long Forward / return 2 speeds With 21 wheels Electrical positioning control with length measuring point by means of measuring trolley Width of roller conveyors 1200 mm both roller tables driven Connected load 11 kW / 21.5 A Ready for immediate use and immediately available Dimensions 10700 mm x 2700 mm x H 3400 mm
Knobel line and a W&D line shot depositor for chocolate. Dosing machine for tempered chocolate with agitator or other liquid as well as slightly viscous products also AWEMA moulding line Hacos chocolate moulding line
We offer an LTG-TowerMax L 67.9-245-3050-610-4360 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 4360 mm Overall width 3380 mm Overall depth 2312 mm Total machine payload up to 2 x 33,950 kg 29 carriers for up to 245 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 3050 mm T = 610 mm Usable height up to 50 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high; with automatic lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.75 kW / 400 Volt Door drive 0.25 k W Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring cou ...
We offer LTG-TowerMax L 20.0-250-1250-825-6900 storage systems modernized by us with a completely new StoreControl L control system. currently still 5 of 6 identical machines available Exterior Dimensions: Height 6900 mm Overall width 1580 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 50 to 750 mm Start of the operating opening in 860 mm above OKFF, then 1000 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installati ...
We offer LTG-TowerMax L 20.0-250-1250-825-5900 storage systems modernized by us with a completely new StoreControl L control system. currently 4 identical machines available Exterior Dimensions: Overall height 5900 mm Overall width 1580 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 68 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 50 to 750 mm Start of the operating opening in 860 mm above OKFF, then 1000 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation ...
weight max. in kg: 2000 kg Gripping range: 1050-1200 mm Suspension: . 0 weight: 180 kg weight max.: 2 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 3000 kg Gripping range: bis 400 mm Suspension: 250 mm weight: . kg weight max.: 3 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 3000 kg Gripping range: bis 400 mm Suspension: 250 mm weight: . kg weight max.: 3 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2000 kg Gripping range: 550-650 mm Suspension: . 0 weight: . kg weight max.: 2 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer LTG-TowerMax L 20.0-250-1250-825-10.000 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Height 10,000 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 65 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, pictures of an identical machine ...
Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg
We offer an LTG-TowerMax L 40.0-500-1300-863-6000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6,000 mm Overall width 1630 mm Installation depth 2980 mm Total payload machine up to 2 x 10,000 kg 30 carriers for up to 500 kg payload each, in clear usable dimensions: W = 1300 mm T = 863 mm Usable height up to 50 to 750 mm Start of the operating opening in 870 mm above OKFF, then 845 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey//blue, carrier galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
• Equipped for toploader boxes • Output max. 20 cartons/min • Blank magazine • Blank transport • Gluing station with 2 glue nozzles for side flaps with Robatec Concept 4 hotmelt gluer • Folding station with folding stamp • Carton discharge with outfeed conveyor • Vacuum generation with Venturi nozzles • Touch screen Siemens Pro-Face • Elau Pac-Drive control with 1x Max-4 and 4x MC-4 • 4 formats for toploader cartons: • Blanks: 225x204, 284x263, 284x348, 397x458 mm • Ready glued WxDxH in throughfeed direction: 70x95x35, 70x95x65 mm and 70x182x65mm, 70x182x120 mm, other formats possible • Drive 24/400V/50Hz • Qualification documentation (IQ/OQ)
We offer an LTG-TowerMax L 67.3-210-3050-813-5450 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 4360 mm Overall width 3380 mm Overall depth 2312 mm Total machine payload up to 2 x 33,950 kg 29 carriers for up to 245 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 3050 mm T = 610 mm Usable height up to 50 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high; with automatic lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.75 kW / 400 Volt Door drive 0.25 k W Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring cou ...
core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg
Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...
We offer an LTG-TowerMax L 20.0-190-1850-825-9500 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Overall height 9,500 mm Overall width 2200 mm Installation depth 2700 mm Total payload machine up to 2 x 10,000 kg 58 carriers for up to 190 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1850 mm T = 825 mm Usable height up to 65 to 750 mm Start of the control opening in 870 mm above OKFF, then 800 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighbori ...
We offer an LTG-TowerMax L 20.0-210-1650-825-8700 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Overall height 8,700 mm Overall width 2000 mm Installation depth 2700 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 210 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1650 mm T = 825 mm Usable height up to 75 to 750 mm Start of the control opening in 870 mm above OKFF, then 800 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighbo ...
Key data: 4 , 12
Air compressor Industrial quality at an affordable price. Fully equipped with: Shamal Compressor Pump (Made in Italy) Two-stage, oil-lubricated pump. Condor Pressure Switches (Made in Germany) With thermal motor protection. Pressure reducer. Also available with 15 bar. The compressor has an oil-lubricated, industrial-grade two-cylinder cast iron pump. The low speed ensures quiet operation. The compressor is equipped with an integrated thermal protection for the electric motor. A pressure regulator and a pressure reducer are also installed. These compressors are often used in the commercial sector. Industrial quality. They are used, for example, where compressed air is needed around the clock. Maintenance accessories are available from stock. All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (a ...
We offer an LTG-TowerMax L 20.0-250-1250-825-10000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 10,000 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 75 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring coun ...
cutting capacity - round: 300 mm dimensions of saw-band: 3320 x 27 x 0,9 mm cutting capacity - flat: 330 x 260 mm cutting capacity - square: 260 mm Control: evolution work height max.: 870 mm : 40 / 80 mt/min weight of the machine ca.: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer LTG-TowerMax L 20.0-250-1250-825-7200 vertical storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Height 7200 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 65 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, pictures of an identical ma ...
Rego Roto Shop DL Circular Knife Machine Stainless steel version, mobile Knives newly sharpened and coated Manual operation via rotary control Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread shaft: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Cleaning machine with 6 months warranty More bread slicers in stock!
Screw conveyor for various materials in very high-quality design with replaceable wear parts, electrically driven, feed length approx. 7 m, feed width approx. 1 m, discharge in the middle, hardly run, very good condition, for example suitable for filling a conveyor belt with the wheel loader, etc.
NNP High shear mixer Stainless high shear mixer, sits over a vessel with hopper to add product, shaft length 600mm, diameter of high shear head 120mm, 3Ph
Central lubrication, oil circulation system, inlet pump, central lubrication unit -Manufacturer: Showa, central lubrication unit from Matsuura MC 710V milling machine -Type: YMAS-3 -Container capacity: 2 liters -Dimensions: 110/220/H250 mm -Weight: 4.2 kg
Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel
Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: by hand -2x: separate containers with pumps -with return flow: into the tank -Dimensions: 800/530/H1100 mm -Weight: 88 kg/piece
Surface Grinding Machine JONES and SHIPMAN 540 P Travel X: 483 mm Travel Y: 168 mm Maxi grinding height: Wheel chuck 190 mm / without chuck 240 mm Spindle rotation: 3200 RPM Year of construction: 1996 Magnetic chuck dimensions: 450 x 150 mm Grinding wheel: Ø 200 mm x thickness 25 mm Auto stepover X - Y Manual Z-axis rise Voltage: 380 V Equipped with: 1 Manual Magnetic Chuck BRAILLON PFF Equipped with: 1 Lubricant tank DARENTH type 1004/01 Tank dimensions: L 650 mm x Depth 700 mm x H 900 mm Dimensions (L x W x H): 1500 x 1100 x 1800 mm Weight: approx 1 T
Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: AEG -Type: SH10G.64 -Number: 3 pieces available -Price: per piece -Weight: 0.8 kg/pc.
Diaphragm pump, centrifugal pump, water pump, chemical pump -from: scrubbing machine make Gansow -Delivery rate: 11.3 l/min -Number: 5x available -Price: per piece -Dimensions: 220/210/H120 mm -Weight: 2 kg
Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel
Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate
Fan, fan, electric motor, blower -Speed: 1360 rpm -Power: 0.37 kW -Air volume: 9700 m³/h -Fan diameter: 500 mm -Number: 4x fans available (1x with damage to the plastic) -Price: per piece -Dimensions: 792/830/H490 mm -Weight: 16 kg/piece
wire electrode, welding wire, welding wire -Net weight: 5 kg -Number: 1x packages available -Price: per package -Weight complete: 5.9 kg/package
4,000 m construction profiles, C-shape galvanized Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Negotiation price: € 4,90 net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Direct dampening with cooling device Chromed cylinders Quick action plate clamps Very well maintained.
Fan filter, fan line, air cooler, control cabinet fan, fan -Manufacturer: Sheng Kwei, fan fan -Engine: Type SK205AP-11-1 -Dimensions: 205/80/H205 mm -Weight: 2,6 kg
: 36/72 m/min : 285 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 1,5/1,8 kW Weight: 485 kg Overall size: 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 250 mm capacity 90 degrees: flat: 380x250 mm : 260 mm : 250 mm : 300x200 mm : 180 mm : 170 mm : 200x170 mm : 240 mm : 210 mm : 280x160 mm dimensions of saw-band: 3770x27x0,9 mm : 385 mm speed: 40/80 m/min total power requirement: 1,5/1,8 kW weight: 695 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2950x27x0,9 mm : 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm output: 1,5 / 1,8 kW Weight: 440 kg dimensions: 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fan filter, fan array, air cooler, control cabinet fan, filter fan, cabinet cooler, axial fan -Manufacturer: Shen Zhen, axial fan type FP-20060EX S1-B -Voltage: 220-240 V / 65 W -Number: 5 fans available -Price: per piece -Dimensions: 200/200/H60 mm -Weight: 1.4 kg
maximum number of results exceeded
please refine your search
