sh used for sale

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

New floor oven HEIN, type: Shopestone -exhibition exhibitor- - Ring tube oven - electric heating - Number of flocks: 5 pieces - Sheet size holder: 60 x 80 cm - Dimensions: B 1,300 x D 1,700 x H 2,145 mm - Exhibition exhibit - Condition: Very good, ready for immediate use Delivery and installation possible by arrangement.

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

T-Shape 3 in1 Multisystem // Year of manufacture 2020 T-Shape combines 3 powerful technologies that work simultaneously to promote the production of collagen and significantly reduce the local volume of fat and elasticity of the skin. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness - Tightening of the skin - Reduction of cellulite - Reduction of fat deposits - Reduction of scope - Treatment after liposuction - Face lift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar and hexapolar radio frequency signal. Heat is generated by the contact of the RF (radio frequency) energy with the tissue impedance. With proper heating, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, an ...

Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clean room pass box. 2-doors Pallet air Shower UV. Pass boxes Air Shower UV is aimed at dust removal and disinfection processes using ultraviolet light (UV) without wastes. Thanks to the fans in the unit and the induction nozzles, dust is removed and collected in the equipment’s filters.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Rondo Laminazione pastry sheeting line 2001, Stainless, total length 7000mm, this line comprises an infeed section – multi roller satellite head, cross pinner and then calibrator making puff pastry from blocks / billets to final width of 600 mm and 2-3mm thickness, comes complete with electrical drawings and manuals.

The ASCO Shredder DS 900 is a powerful double shaft shredder for professional use in recycling, industry, waste disposal, and construction site logistics. With its robust construction, high drive power, and large filling opening, it is especially designed for shredding voluminous, heavy, or resistant materials. Whether timber, plastic, packaging, pallets, production residues, or green waste, Shredder DS 900 impresses with high throughput, controlled material shredding, and a durable, maintenance-friendly design.Two counter-rotating cutting shafts grip the material securely and shred it efficiently, even under difficult conditions. ASCO Shredder DS 900 is suitable for both stationary continuous operation as well as mobile use. The integrated control system offers intuitive operation, while the automatic reversing system ensures trouble-free operation in the event of overload or blocka ...

The ASCO DS 600 is a compact, powerful double-shaft shredder designed for the efficient shredding of a wide range of materials, making it ideal for recycling companies, businesses, municipalities, and construction site logistics. With its robust construction and maintenance-friendly design, it handles wood, green waste, plastics, foils, pallets, packaging material, and production residues reliably and evenly. The counter-rotating shafts and powerful cutting units ensure controlled shredding with minimal space requirements. Its sophisticated design allows it to be used as a stationary or mobile unit, offering maximum flexibility for daily operations. An integrated control system provides simple operation, and an automatic reversing system prevents blockages for trouble-free use. Generous access points make maintenance quick and user-friendly. Whether used as part of a larger processin ...

High-quality lattice supports with high load capacities, inexpensive alternative for gratings – Brand new – Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (with a 2.70m trusss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1.05m 1,10 1.20m Other depths on request! Evenly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Lattice grid: 50 x 100 or 25x100mm Please also indicate which beam type (truss type) you have! So whether box profile (or IPE carrier) 50 or 40mm, or whether they have trusses with step. Advantages: no sharp edges 200% safety factor – independent of the shelf beams Bealstable for permissible deflection and structural failure Large selection of standard sizes and load capacities MantaMESH is our market-leading wire me ...

ASCO Shredder VS 900 is ideal for rapidly and efficiently breaking down different composite materials. Its polyhedral inner wall has unfolded edges that slow the material, while centrifugal forces push pieces outward into corners where they are shredded as rotation continues. Materials separate automatically due to their different specific masses, allowing, for example, plastic to divide from aluminum or aluminum from iron. A screening grid can define the final fraction size; although this reduces performance, it enables direct feeding into further processes. ASCO Shredder VS 900 uses counter-rotating tool chains in a closed system that minimizes emissions and ensures smooth operation, even under tough conditions. The gentle shredding process preserves material quality and supports easy sorting, separation, or composting. Tools can be changed within minutes to reduce downtime, and the ...

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Technical data of the profile clamp: Manufacturer: META Type: CLIP The scope of delivery includes: 01x Profile clamp, used Design: for double shelves Material colour: hot-dip galvanized Total height: approx. 82 mm Total width: approx. 46 mm Material thickness: approx. 2 mm Weight | Pcs. approx. 0,150 Kg Note: Since these are second-hand goods, there may be damage, rusting, etc. Currently available in stock: approx. 200 pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

The scope of delivery includes: 01x Shelf connector, second choice (new) Manufacturer: Kimer for shelf spacing: approx. 200 mm Material colour: sendzimir galvanized Total length: approx. 280 mm Profile: U 78 x 30 mm Weight: 0.47 kg | Pcs. Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or contamination may be present. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.

Agnelli Automatic sheeter Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph

Dough laminator Z. Matik Dimensions of the open machine: 3020x1130x1235mm Closed machine dimensions: 1690x1130x2150mm Electric power: 0.75kW Voltage: 400V 50Hz Weight: 250 kg

Dough laminator Z. Matik Dimensions of the open machine: 3410x1130x1235mm Closed machine dimensions: 1690x1130x2150mm Electric power: 0.75kW Voltage: 400V 50Hz Weight: 210 kg

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

Dough laminator Dimensions: 3480x1110x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 610x2800mm Distance with adjustable roller: 1-40 mm Weight: 260kg

Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg

1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Shinohara Fuji 52 N+P Year 1988 - Serial-No. 1001871 Size min. 105 x 148mm - Size max. 360 x 520mm Paperweight 0.04 - 0.4 mms Dampening system conventionel Plus Version Numbering and Perforation Unit Powderspray Quick clamp plate change Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - / Contact us at -

Tatham Twin shaft paddle mixer Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base

2.0pcs Autonomous AGV Shuttle Cart -2 x AGV shuttle trolley with conveyor for 2 boxes each (Automated guided vehicle system with intelligent control for 2 boxes each -Charging

Wheel Balancing Mandrel JONES - SHIPMAN to suit taper flanges, Model 540, Model 1400, Information about technical data are not binding., Machine available subject to prior sale.

USED UNTHA SINGLE SHAFT SHREDDER, Type LR 1400, rotor width 1.400 mm., speed 30/44, 2 x 22 kw drives, constructed in 2006, connected and running, Feed opening 1.400 x 1.050 mm, Constructors description: The strong throughput capacity of the LR1400 shredder is a result of the strong drive motors and the performance-oriented machine configuration. The configuration comprising a long rotor, a large perforated screen surface and optimised cutter geometry provides the performance which you require in your plant. High performance requires reliable machine operation, which we ensure with a full range of high-quality technological components., Thanks to the rotors special mounting, dust-protected bearings, tried and trusted gear damping and special cutting tools, the wood shredder is also very low maintenance and has a long service life. The intelligent drive control shuts the shredder motor dow ...

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDER 150 kw (or 180 kw), sturdy structure in electro-welded steel, cutting chamber dimensions mm. 2000x1000, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 + 75 kw optional 90 + 90 kw, hydraulic unit power 11 kw (15 HP), transmission by belts, 1 rotor, rotor diameter 480 mm., rotor length 2000 mm., 122 reversible tools, 4 usable tool sides, 8 upper fixed blades, 8 lower fixed blades, 73 average rotor revolutions/min., weight 13000 kg, production 3500-5000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 1000 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 150 kw or 180 kw, width: 2. ...

SINGLE SHAFT SHREDDER 75 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1300x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 kw (100 HP) optional 90 kw (120 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1300 mm., 80 reversible tools, 4 usable tool sides, 5 upper fixed blades, 5 lower fixed blades, 73 average rotor revolutions/min., weight 6200 kg, production 2500-3500 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 75 KW, width: 1.300 mm. 51.18

SINGLE SHAFT SHREDDER 55 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1100x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 55 kw (75 HP) optional 75 kw (100 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1100 mm., 66 reversible tools, 4 usable tool sides, 4 upper fixed blades, 4 lower fixed blades, 73 average rotor revolutions/min., weight 5500 kg, production 1200-2000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 55 kw

SALDOFLEX MODULA M-2011 S, for T-shirt bags, open top bags, sealing width 1.100 mm, min/max bag length: 400/1.200 mm, 3 lanes, Unwinder: 1.700 mm, Film speed: 160 m/min, Cycles: 300 cycles/min, Servo drive, Photocell, Gusseting units, control panel, Constructed in 2007, totally refurbished in 2021, availability: immediate, working width: 1100, conditions: very good, type: T.shirt and open top bags 1.100 max sealing width

DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw

DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw

Key data: 500 KG, 2700 mm, 2350 mm

RACKING SYSTEM No. of Bay : 44 bays (PM AREA) 48 bays (FG 2 AREA) Frame Size : H 2,750mm x D 1,200mm Frame Type : 90mm x 70mm x 1.8mmthk Maximum Load per bay : 6,100kg @ max. height between beam interval level height of 2350mm Beam Length : 2700mm clear span Beam Type : BB85mm x 45mm x 1.5mmthk - 2700mmL Beam Loading Capacity : Every pair of beam is designed to take a uniformly distributed safe working load of 1000kg No. of Storage Beam Level : 1/2 beam level ( 2/3 pallet height ) Frame Spacer : 100mmL Pallet Size : 1200mm W (Fork entry) x 1200mm D x 900/2200mm H Pallet Weight : 500kg (max) Total Pallet Location : 456 nos. Accessories Column Protectors : 400mmH Frame Protectors : 600mmH x 1200mmL 600mmH x 2500mmL Wire Mesh Decking : 100mm x 50mm x 5.0mmthk c/w 3 pcs support bar

ISVE COMBI 80/80S-GR700, including loading and extraction belts, sturdy supporting structure, TWIN SHAFT SHREDDER with, loading hopper, shredding chamber 800 x 800 mm., dust and liquid proof bearing cases, n.2 shafts on upper part, n.42 rotating knives with staggered hooks, n.2 planetary gearboxes, n.2 x 11 kw Siemens drives, automatic inversion on overcharge, GRANULATOR type C 40-70, soundproof cased, rotor wiudth 700 mm, rotor diam.400 mm, screen 40 mm, V-belt transmission, 22 kw drive, Electric cabinet wit S7-1200 Siemens PLC and touch screen display, Users manual, CE, electrical drawings, installed power - used power in work: about 60-65% : 44 kW, availability: immediate, working width: 800 mm., conditions: fully reconditioned, type: SHREDDER + GRANULATOR - 40 mm screen

SATRIND DUAL-SHAFT HYDRAULIC SHREDDER K10/50, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.000 x 850 mm ca, 2 counter-rotating steel shafts, NEW Knives, Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, NEW electrical control panel with PLC and connection for remote assistance, inverter, alarms,, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 70 days ca, conditions: reconditioned, type: K10/50, Power: 37 kw

2-SHAFT SHREDDER - HEAVY DUTY, The machine is constructed in sturdy carbon steel and is complete with a supporting structure (1.400 mm heigh) and a loading hopper prepared to receive material from a spider or a belt, size 2.500 x 1.500 x 1.200, Shredding chamber mm.1500 x 900, independent shafts 1.500 mm long, shafts are driven by independent electromechanical motors., 2 x 75 kW motors, The maximum installed power is used to absorb load peaks. Normally, absorption will settle at values around 50% of the installed power., Shafts speed 13-15 rpm, N.15 knives 100 mm thick with 4 hooks, Automatic inversion on overload, Automatic lubrication pump, Tolerance : iron rods with a maximum thickness of 4 mm (up to 3%-4% of the total material), Electrical panel with PLC, Cabinet dimensions: L 1800 mm, H 2000 mm, D 500 mm., installed power - used power in work: about 60-65% : 150 kW, availability: ab ...

General SKU366W1221 LocationBarneveld MakeQVF Glasstechnik No.B2.23 Main Features Shell (Material)glass Tube (Material)glass Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3 Heat exchangercheck Verticalcheck Shell diameter230 mm Shell length1200 mm Shell connectionscheck Cover connectionscheck Information Floorspace0,40x0,40 m Total height1,4 mShell and tube heat exchangersQVF GlasstechnikHeat exchangers > Shell and tube heat exchangersBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU366W1231 LocationBarneveld MakeQVF Glasstechnik TypeHEB9 Pressure Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes2.7 Bar Main Features Shell (Material)glass Tube (Material)glass Surface1.5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3 Heat exchangercheck Verticalcheck Heating surface1,5 m² Max. temperature200°C Shell diameter230 mm Shell length800 mm Max. temperature200°C Shell connectionscheck Cover connectionscheck Information Mounted on framecheck Floorspace0,40x0,40 m CEcheck Total height1,0 mShell and tube heat exchangersQVF GlasstechnikHeat exchangers > Shell and tube heat exchangersBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU366W1230 LocationBarneveld MakeQVF Glasstechnik TypeHEU9/A Main Features Shell (Material)glass Tube (Material)glass Surface5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3 Heat exchangercheck Verticalcheck Heating surface2x 2,5m² Shell diameter400 mm Shell length2200 mm Shell connectionscheck Cover connectionscheck Information Mounted on framecheck Floorspace0,40x0,40 m Total height2,20 m Extra SpecificationsDouble spiral heat exchanger mounted together, 2x 2,5 m²Shell and tube heat exchangersQVF GlasstechnikHeat exchangers > Shell and tube heat exchangersBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU339W1250 LocationBarneveld MakeJenkins heat exchangers ( mersen) TypeGEKBH-7MK1A No.7605 Year of construction2001 Pressure Working pressure7 Bar Working pressure shell7 Bar Working pressure tubes7 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface4.4 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Heating surface4,4m² Tube capacity10l Max. temperature-30/+165°C Shell capacity22l Max. temperature-30/+165°C Information Total height0,6 m Weight500 kg Floorspace0,85x0,6 m Extra Specificationsblock heat exchanger. Phenolic resin impregnated extruded graphite. Shell and tube heat exchangersJenkins heat exchangersHeat exchangers > Shell and tube heat exchangersBrand > Jenkins heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

General SKU366W1254 LocationBarneveld MakeVicarb Deutschland GmbH No.1502 Year of construction1989 Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface2 m² Tube capacity11 l. Max. temperature160°C Shell capacity10 l. Shell connectionscheck Cover connectionscheck Information Floorspace0,60x0,35 m Total height1,80 m Weight355 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU366W1246 LocationBarneveld MakeVicarb Deutschland GmbH No.1508 Year of construction1989 Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface5.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface5.8 m² Tube capacity26 l. Max. temperature160°C Shell capacity22 l. Shell connectionscheck Cover connectionscheck Information Floorspace0,60x0,60 m Total height2,15 m Weight635 kgShell and tube heat exchangersVicarb Deutschland GmbHHeat exchangers > Shell and tube heat exchangersBrand > Vicarb Deutschland GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...