sh used for sale

Key data: 2400 KG

Technical data of the pallet rack crossbar: Shelving system: Galler Type: Omega The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: grey IPG profile: 145 x 65 mm Agraffe: 5 HK (hooks) Clear width: 4,295 mm Max. load per pair of trusses 2,400 kg, with the same weight. Distributed load 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery can be queried from us

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

v.v. euroklemming Auction-ID: A1-45793-116

Auction-ID: A1-45793-34

PFERD Mammut Electronic ME 20 flexible shaft drive was built in Germany by August Rüggeberg GmbH & Co. KG. This high-quality device is used in many industries and processes to drive a wide variety of tools. It offers high power and stepless rotational speed adjustment, enabling precise adjustment of the parameters to the specific applications, such as milling, grinding or polishing. In combination with the compact holders and extensions, the PFERD Mammut Electronic flexible shaft drive is ideal for use in the hardest-to-reach places. Advantages of the PFERD tool drive – quick and easy rotational speed adjustment during operation – high power even at low rotational speed – very quiet operation – automatic switch-off in the event of overload or power failure – easy operation and service Technical specifications of the PFERD Mammut Electronic ME 20 flexible shaft drive ...

Auction-ID: A1-45973-85

230V. Auction-ID: A1-45973-50

ENIDINE HD 2.0 x 28 FMP Industrial Shock Absorber / Hydraulic Buffer – Heavy Duty Damper Sell a large ENIDINE/ITT Enidine Industrial Shock Absorber from stock. Data according to nameplate: Manufacturer: ENIDINE / ITT Enidine Type: HD 2.0 x 28 FMP P/N: FMP34530-R Heavy-duty hydraulic shock absorbers / industrial buffers For mechanical engineering, conveyor technology, crane systems, end stops, industrial plants, etc. The shock absorber is in a sturdy wooden box. Condition see pictures. Probably unused stock, but with traces of bearing and dirt. Function was not checked, therefore sold as stock goods/spare part. Important note: Do not open – component is under pressure according to the warning. Price: 500 € VB Pickup only due to size and weight. Private sale / stock liquidation, no guarantee, warranty or return.

We offer: Pallet racking, new 81 pitches Manufacturer: Maxrac Specifications: 10 stand frames, approx. 1,700 x 1,050 mm 36 supports, approx. 2,700 x K130 mm 72 locking pins Shelf load is 3,000 kg (with evenly distributed load). Per piece €2,382.35 net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.

Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t

Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier

approx. 2.900 pieces shelves for Bito shelving shelves, shelves: approx. 1.30m x 0.50m - used - : Price from location (net) / unit: Shelf: only 6,50 € Price for complete purchase: only 6.-€ (net) / piece! Manufacturer: Bito Type: unknown Year of manufacture: unknown Depth: 50 cm Shelf width: 130 cm Frame height: approx. 260 cm (some only 200 cm) Quantities: Frame: approx. 450 pcs. Shelves: approx. 5,000 pcs. Load capacity per floor: unknown, but at least 100kg Inl. Incidentals Condition: good Available: immediately Location: 69502 Hemsbach

Product description (Item no. KAR251) 1 covered cantilever racking system with canopy and rear wall as well as available drainage Total length: approx. 83 linear meters. Make: OHRA System: Cantilever arm 60 one-sided design Year of Make: 2015 galvanized version 50 Pieces Stand Stand height: 6,000 (5,740 + 273) mm 50 Pieces Feet Foot length: 2,800 mm Profile: 273 x 136 mm Column load per side: 1,500 kg/ max. approx. 100 pieces arms 2 = pieces per stand Type: K60K Arm length: 2,500 mm Profile: 140 x 75 mm Arm load: 500 kg/ max. Load centre of gravity: 1,250 mm Wheelbase: approx. 1,500 mm with cross bandages and arm bridges between the cantilevers 3 pieces per box Profile: 82 x 47 mm Length: 1,400 mm Rising roof arms Length: 3,500 mm Profile: 120 x 65 mm Webs Length: approx. 1,350 mm Profile: approx. 82 x 47 mm Condition: used Full ...

1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...

Used sheeting machine FRITSCH; Type: Rollfix 60/650 E -in bakery condition- - Automatic flour shaker - Automatic reel - storable programs - Multiple degrees of reduction - Freely programmable curve settings - LCD display - Condition: Good, ready to use The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.

SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm