sh used for sale

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Specifications Maximum pressure: 6 tons Press force: 2.5 kg/cm² Bale size: 600x400x500 mm Bale weight: approx. 50 kg Power connection: 400V / 2.2 kW Year of Make: 1995 Productivity: approx. 3 bales/hour Shredder Cutting width: 5.8 mm Power connection: 380 V/ 4 kW Year of Make: 1994 Safety level: DIN 66399-1, 5.2 P-3 /O-2/T-2/E-2/

Machine type: MIG/MAG welding machine Type PowerMAG MM 4200 W complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 40 – 420 amps Duty cycle 60% ED at 420 amps 80% ED at 360 amps 100% ED at 325 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 32 Amps Dimensions L x W x H 900 x 400 x 650 mm Weight 110 kg Age 3 months Condition workshop tested, like new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 1 can of non-stick spray 1 Piece Instruction Manual Warranty 24 months from the date of delivery List fa ...

Offer 24289 Specifications: - Max. cutting width 3060 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjustment screws - Number of hold-downs 15 pcs - Stroke rate 23 to 43 rpm - Front angle stop -Mot. Positioning-controlled back gauge 15 - 850 mm - Cut line illumination - E – Footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 90 mm, length 14 m -Transport dimension: 1060/800/H400 mm -Weight: 63 kg with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 90 mm, length 16 m -Transport dimension: 1200/1090/H350 mm -Weight: 74 kg with pallet

Trimmer Bettcher type 1500M2 - NEW /183008/ Trimmer Bettcher type 1880M2 - NEW /183004/ Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Cantilever rack CB Condition: new / unassembled Design: single-sided Usage: Interior Shelf height: 2,985 mm Shelf length: 6,070 mm Axial dimension: 1,200 mm Shelf depth: 650 mm Usable depth: 500 mm Adjustment grid: 150 mm Number of storage levels incl. foot level: 7 Load: 150 kg per arm Stand load: 1,450 kg Surface: galvanized ----- Scope of delivery: 6 x Shelf Stand 12 x Foot Profile 6 x Connection Profile / Foot 36 x cantilever arm / 3 mm U-profile 36 x Hook safety 5 x Cross Bandage 6 x Heavy-duty anchors 1 x Load Shield incl. mounting material ( screws, washers, nuts ) General information about the article: This item is only available for pickup. An additional desired Transport or shipping of this item is associated with additional costs, which can be queried separately depending on the delivery location or scope of delivery.

ALDURO Professional Knife WASU 50-230V for perfect results when sharpening your knives ! Backward Sanding Belt 50 x 1000 mm Peel-off felt disc Motor 0.6 kW, 230 V Speed 2850 rpm Belt speed 15 m/sec. Weight approx. 20.5 kg

Cutting lenght 6100 mm Cutting thickness 16 mm

Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...

The SE60 shrink tank is the perfect addition to your Multivac vacuum machine for shrink packaging of traditional products Max Product sizes (W x D x H): 600 x 400 x 180 mm Max weight: 25 kg Machine dimensions (W x D x H): 720 x 680 x 1250 mm Working height: 820 mm Machine weight: 115 kg

Approx. 18m Mecalux pallet rack/heavy-duty rack Need help creating your warehouse? We will be happy to advise you - we draw on our many years of experience. If you want a different composition of the shelves, no problem! We have our own large warehouse. We help you from planning to assembly and acceptance Everything from a single source. Description Mecalux pallet rack with a total length of approx. 18 m, consisting of 1 x base field and 4 x add-on fields (approx. 3.60 m each). Each field has three levels with six trusses (3.60 m) 4 Euro pallets (incl. floor space) can be stored next to each other and 4 pallets on top of each other per field One field offers space for 16 Euro pallets. Total pallet spaces 80 Shelf height: approx. 700cm Shelf depth: 110 cm Clear field width: 359 cm Number of levels: 3 Number of fields: 5 Max. shelf load: 4000 kg Max.  ...

6-sided packaging machine from the manufacturer Mac Due, model: Maxi 120/A and integrated shrink tunnel T.150-80 R. suitable for dimensions: 1000 x 1700 x 500 mm. Dimensions complete system: 11245 x 2170 x 2460 mm incl. extensive documentation Viewings possible at any time by arrangement.

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 110 mm, length 16 m -Transport dimension: 1360/1100/H400 mm -Weight: 77 kg with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 70 mm, length 38 m -Transport dimension: 1445/900/H400 mm -Weight: 77 kg with pallet

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 90 mm, length 58 m -Transport dimension: 1400/1200/H550 mm -Weight: 141 kg with pallet

Wire rope, steel cable, nylon rope, Ships rope, rope -Ship rope: with loops -Nylon rope: Ø 92 mm, length 58 m -Transport dimensions: 1250/1040/H600 mm -Weight: 173 kg with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 120 mm, length 101 m -Transport dimension: 1900/1500/H870 mm -Weight: 404 kg with pallet

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 100 mm, length 8 m -Transport dimension: 900/900/H300 mm -Weight: 52 kg with pallet

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 105 mm, length 9 m -Transport dimension: 1080/900/H300 mm -Weight: 59 kg with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 105 mm, length 11 m -Transport dimension: 1200/800/H300 mm / 1140/860/H340 mm -Weight: 52 kg/ 53 kg with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Cable: Ø 55 mm, length 32.5 m -Transport dimension: 1200/1000/H500 mm -Weight: 91 kg with pallet

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

Technical data for the pallet racking system: Shelving system: Lücht & Palm Type: MB Note: Because of the hot-dip galvanized surface, the shelves are suitable for outdoor use. The scope of delivery includes: 20x Pallet rack stand, used Material colour: hot-dip galvanised Frame profile size: U 120 x 50 x 5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) 4,000 mm high 900 mm deep 95x Pallet rack crossbar, used Material colour: hot-dip galvanised Profile: IPE 120 x 64 mm Clear width: 5,015 mm Max. load per pair of trusses 1,500 kg, with the same weight. Distributed load 17x Shelf connectors, used Material colour: hot-dip galvanised Profile: L 40 x 40 x 4 mm Clear width: 200 mm 80x bolt anchors, new Manufacturer: Hilti Type designation: HST2RM12x105/10 Design: Stainless steel 40x Balance plate, used Design: ...

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 105 mm, length 16 m -Transport dimension: 1600/840/H400 mm -Weight: 86 kg with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 115 mm, length 8 m -Transport dimension: 1200/970/H300 mm -Weight: 59 kg with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 110 mm, length 12 m -Transport dimension: 1630/700/H300 mm -Weight: 70 kg with pallet

Mercodor twin-shaft shredder with a cutting space of 1200x600 mm, knife loading, optionally e.g. 40 mm, 3 hooks or 20 mm, 25 hooks... Solid housing welded design with appropriate bearing and sealing to the cutting chamber.

Hacker Lindner T 650/220-2 with Virborinnen with scraper conveyor with metal detector 55kw...

Vehicle rack, commercial vehicle equipment, sortimo block, equipment block -Manufacturer: Sortimo, vehicle rack vehicle equipment with vice -Type: unfortunately without type designation -Mounting kit: BFE215 -Vice: clamping jaws 120x25 mm, span 170 mm -Dimensions: 1720/380/H1500 mm -Weight: 88 kg

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving -Shelf trolley: with 6 levels. Writing tray and filing wall -3 levels: with wooden insert -Chassis: 4 swivel castors, with brakes -Total dimensions: 1260/430/H2110 mm -Weight: 93 kg

A used deck oven Friedrich E4 8/6 with 4 shelves, base and exhaust hood is currently for sale and immediately available in our warehouse. Deck Oven Friedrich E4 8/6 - 4 shelves each 80cm wide and 60cm deep - With digital control - 17.8 kW - With exhaust hood - Year of construction 2016 Exterior Dimensions: Height: 218c

Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg

Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg

balancing valve, shut-off valve, ball shut-off valve, ball valve, ball cock, pressure relief valve, shut-off valve -Shut-off valve: unfortunately without type designation -Dimensions: see photos -Price/Delivery: complete -Dimensions: 135/70/H35 mm -Weight: 0.5 kg/piece

sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m Manual back stop up to 500 mm Side stop and table extensions Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

balancing valve, shut-off valve, ball shut-off valve, ball valve, ball cock, pressure relief valve, shut-off valve -Shut-off valve: Type ND30 NW12 3 pieces -Dimensions: see photos -Price/Delivery: complete -Dimensions: 110/60/H30 mm -Weight: 0.3 kg/piece

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 150 x 15 mm, cross-toothed -Hole: Ø 32 mm -Weight: 1.2 kg/piece

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 125 x 12 mm, cross-toothed -Hole: Ø 32 mm -Quantity: 1x cutter available -Weight: 0.8 kg

Short-stroke heavy-duty cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders -with external thread: M 90 x 2 -Piston: Ø 55 mm -Max. stroke: 550 mm -max.: 700 bar

Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintance, 13Kw motors, highshear overhauled 2017, level detection, 50mm discharge pipe, 3Ph