sh used for sale

Closure feeder consisting of trough pick-up and conveyor belt

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Key data: 4040 mm, 2 mm

Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA04 -Square: 19 x 19 mm -Measurements: see photos -Quantity: 8x universal joint available -Price per piece -Dimensions: 360/70 / H55 mm -Weight: 3.6 kg / pc.

Cardan shaft, cardan shaft, universal joint, center bearing, holder -Cardan shaft: center bearing, unused -Type / order no .: 21001375 402027/201 7610AVA05 - Inside: Ø 31 mm -Measurements: see photos -Quantity: 2x holders available -Price per piece -Dimensions: 141/73/32 mm -Weight: 0.4 kg

Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and machining of large workpieces precise and easy. It is operated via a foot pedal, which frees up the hands to align the workpiece. Specifications: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Pressure hold-down: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy scissor blades with a high chromium content - 2-fluted upper blade, 4-fluted lower blade - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Side stop with double scale - Feeder work table with ball rollers - Full-length front  ...

ship propeller, propeller -ship propeller: Propeller, material bronze -Condition: refurbished condition -Outer diameter: 1520 mm -Height: 410 mm -Conical bore size: Ø101/123 mm -Weight: 333 kg

Current delivery time: approx. 10-15 working days Ordered goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 2,000 mm 10x Shelf trusses, new Material colour: RAL 2004 orange Truss length: 1,350 mm 20x Kimer Safety Pins Material colour: sendzimir galvanised 05x Particleboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Version: multi-part 10x deep webs, new Material colour: sendzimir galvanised Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the article: This item is only available for pickup. Any additional transport or shipment o ...

Current delivery time: approx. 10-15 working days Ordered goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 2,500 mm 10x Shelf trusses, new Material colour: RAL 2004 orange Truss length: 1,350 mm 20x Kimer Safety Pins Material colour: sendzimir galvanised 05x Particleboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Version: multi-part 10x deep webs, new Material colour: sendzimir galvanised Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the article: This item is only available for pickup. Any additional transport or shipment o ...

Current delivery time: approx. 10-15 working days Ordered goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 3,000 mm 10x Shelf trusses, new Material colour: RAL 2004 orange Truss length: 1,350 mm 20x Kimer Safety Pins Material colour: sendzimir galvanised 05x Particleboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Version: multi-part 10x deep webs, new Material colour: sendzimir galvanised Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the article: This item is only available for pickup. Any additional transport or shipment o ...

Key data: 2000 mm, 1 mm, 2000 mm

Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.

Key data: 200 mm, 1 mm, 200 mm

Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.

Gear, cogs, gear shaft -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Garant, shell end mill shell end mill -Type: H 40Ø x 20 x 16 H C7 Sp.224mm -Intake: with fitting groove -Cutting material: HSS-Co5 -Dimension: Ø 40 x 20 x 16 mm -Weight: 0.1 kg

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Fette, shell end mill with longitudinal groove -Type: Fette 50 x 25 H Sp 588 -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 50 x 25 x 22 mm -Weight: 0.2 kg

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 9,540 mm Number of fields per row of shelves: 05 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 100 pcs. Pallet spaces per field: 100 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of shelve ...

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Shell milling cutters: with longitudinal groove -Type: HSS 60x30x27 H -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 60 x 30 x 27 mm -Weight: 0.4 kg

Used, good working condition. Model S

Used, good working condition. New belts.

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 11,430 mm Number of fields per row of shelves: 06 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 120 pcs. Pallet spaces per field: 120 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of s ...

Machine type: MIG/MAG welding machine Make Merkle Type ME 251 LK Appendix No. 7206 Connection voltage 3 x 400 volts Adjustment range 40 - 250 amps Duty cycle 35% ED at 250 amps 60% ED at 170 amps Current setting 8 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 815 x 440 x 680 mm Special accessories for point and interval equipment Weight 122 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Adorned 1 pair of welding gloves 1 Pi ...

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Round steel: up to 15 mm -Overall dimensions: 460/160/H1230 mm -Transport dimensions: 1000/160/H440 mm -Weight: 23 kg

Machine Type: TIG Inverter Welding Machine Water-cooled DC system Make Merkle Type TIG Insquare 350 W-DC Appendix No. 24.410 Connection voltage 3 x 400 volts Adjustment range 5 – 350 amps Duty cycle 60% ED at 350 amps 100% ED at 270 amps Current adjustment infinitely variable max. weldable material thickness steel / stainless steel = 10 mm Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm incl. bottle holder Weight 130 kg Age approx. 30 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch SR 18 SC, 8 mtr. long 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruc ...

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Overall dimensions: 380/160/H1160 mm -Transport dimensions: 830/160/H500 mm -Weight: 25 kg

Immediately available used Pneumatic emergency stop

Immediately available used emergency shutdown

Inv. Num. : 7381 Type:- Producer: Jorns Generated: Parameters: Maximum sheet thickness when cutting: 3 mm Maximum sheet metal plate width: 1250 mm Max. the weight of the scroll: 6000 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 300 mm -Round steel: up to approx. 17 mm -Overall dimensions: 500/145/H1325 mm -Transport dimensions: 1000/145/H450 mm -Weight: 38 kg

Hydraulic press, oil hydraulic press, shear press -Manufacturer: Santenberg, hydraulic shear press -Hydraulic unit: HyPneu 0.75 kW / 100 bar -Individual components: see photos -Dimensions: 1190/910/H1670 mm -Weight: 262 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Hydraulic cylinder: double-acting stroke 180 mm -Piston rod: Ø 65 mm -Cylinder: outside Ø 120 mm -Dimensions: Ø 120 x 340 mm -Weight: 16kg

Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...

Shredder UNTHA RS-60 Main shaft speed: 17.3 rpm Secondary shaft speed: 20.5 rpm Chopping discs width: 19 mm Drive power 2x30 kW 400 V, 50 Hz Screen perforation round: Ø 35 mm External dimensions of the cutting unit with drive: LxWxH: 2440x1470x1040 mm Total weight without base: approx. 7,500 kg Control cabinet with wiring : complete incl. 1xComplete second knife set after overhaul at Untha Incl. funnel and base clean machine, checked, always maintained, 1 owner !

Rubber mat, rubber sheet, rubber stop, stop plate, rubber cover, rubber pad, rubber mat -Rubber cover: Rubber pad -Thickness: 9 mm -Length: 1000 mm -Width: 200 mm -Weight: 2.4 kg

rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat -Rubber cover: rubber pad -Thickness: 9 mm -Length: 1985 mm -Width: 200 mm -Weight: 5.1 kg

RMH Chain Mill Capacity container 50 litres Drive: 5.5 KW/400 V For shredding electronics, connectors, monolith Adjustable via hand lever and adjustable in different positions. Tiltable

1 used in-store baking oven Wiesheu B8-E2, in baker's condition, for 10 trays, with base frame and steam condenser, Ser.-No. 10205286, 26.6 A, 18.4 kW, 400 V, 50 Hz, water pressure 150-250 kPa

PTO shaft, cardan shaft, cardan shaft, universal joint shaft, articulated arm -Manufacturer: KUKA, articulated arm from robot KR125/3 KR125L90/3 -Item no.: 71 040 098 -Shaft: Ø 37 mm -Number: 3x articulated arm available -Price per piece -Dimensions.: Ø 37 x 650 mm -Weight: 1.3 kg/pc.

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Steel, lever shears, sheet metal shears with stable base -Cutting length: approx. 325 mm -Overall dimensions: 840/560/H2075 mm -Total weight: approx. 131 kg

Sheet Metal Curve Cutting Machine 400 V Dimensions: 140 x 40 x 100 cm

Technical data approx.: - Max. working width 1020 mm - Max. material thickness at 40 kg/mm², strength 1.5 mm -one. Adjustable back gauge up to 550 mm - Front angle stop - Sheet metal hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg -mobile

PLC expansion module, switchgear, control system, marshalling module, circuit board module -Manufacturer: Phoenix Contact, PHG patch panel -Type: UMK-SE 11.25-1 ID number: 3522449 -Number: 2 modules available -Price: per piece -Dimensions: 115/75/H40 mm -Weight: 0.1 kg/pc.

YAWEI L6SK 6X2500 guillotine shears, built in 2012 in China, are designed for precision cutting of steel sheets with a maximum length of 2500 mm and a thickness of 6 mm. Technical specifications of YAWEI L6SK 6X2500 guillotine shears - maximum sheet metal thickness: 6 mm - maximum sheet metal length: 2500 mm - installed power: 13 kVA - power supply: 3x 400 V; 50 Hz

Machine type: MIG/MAG welding machine Make Lorch Type Saprom 905 Connection voltage 3 x 400 volts Adjustment range 25 - 400 amps Duty cycle 40% ED at 400 amps 60% ED at 350 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case, Robot interface and 5 mtr. VB Cable Wire Feeder Gearbox 4-Roller Gearbox Fuse 32 Amps Dimensions L x W x H 900 x 420 x 1,235 mm Weight 123.5 kg Age approx. 15 years Condition workshop tested, very good, incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Li ...

Double pressing/folding/product pressing single or shingle flow Condition: overhauled, serviced, fully functional, ready for use Min. format: spine 180 x width 140 mm, number of pages (45g/m2) tabloid 8, two-fold/broadsheet 4 Format max. spine 450 x width 340 mm, number of pages (45g/m2) tabloid 128, two-fold/broadsheet 64 Mechanical speed max.: 10000 revs/h

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 90 mm, length 8 m -Number: 2x rope available -Price per piece -Transport dimension: 1200/800/H300 mm -Weight: 50 kg/pc. with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 90 mm, length 9 m -Transport dimension: 1200/800/H300 mm -Weight: 55 kg with pallet

Wire rope, steel cable, nylon rope, ship rope, rope -Ship rope: with loops -Nylon rope: Ø 100 mm, length 14 m -Transport dimensions: 1200/800/H500 mm -Weight: 60 kg with pallet

Wire rope, steel rope, nylon rope, ship rope, rope line -Ship rope: with loops -Nylon rope: Ø 55 mm, length 77 m -Transport dimension: 1550/900/H500 mm -Weight: 99 kg with pallet