127,258 used machines on RESALE, but how to find them? Machine Search
Heidelberg SBP-66 Horizontal Stack Delivery Age: 2005 Max. format: 66 x 30 cm Format min.: 12 x 10 cm Integrated Pressing Unit Height adjustable infeed Integrated control Panel MCT With Heidelberg Coupling Box
Shrink packaging FL5545TB L sealer and shrink tunnel Serial: 872 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph
Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.
Specifications Cutting width: 6 x 50 mm Year of construction: 2007-2009 Productivity: approx. 120 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s Security level: P3 Power supply: 400 V/4 kW Machine is fully functional, after technical supervision.
Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare ...
MVD B06-3100 hydraulic guillotine shears were built in 2014 in Turkey by MVD Inan Machine Tool Industry Co. The machine is used for precision cutting of sheet metal with a maximum thickness of 6 mm. The machining process is performed by means of high-quality cutting knives, set at an angle of 1.5°. Positioning of the material is facilitated by a work table with integrated balls, on which the workpiece goes directly under the cutting line. All this is complemented by a robust design with a reliable 10 kW main motor. The MVD B 06-3100 guillotine shears weigh approximately 6000 kg. Technical specifications of the MVD B06-3100 guillotine shears - maximum sheet metal length: 3100 mm - maximum sheet metal thickness: 6 mm - number of strokes (automatic mode): 30/min - number of strokes (manual mode): 18/min - cutting angle: 1,5° - minimum distance of light curtain from knife: 2030 mm ...
Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW Safety level 2+1 according to DIN 32757 P-3, O-2, T-2 wg DIN66399 pts. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW
Basic equipment: Central axle trailer chassis for 80 km/h Brake system with ABS according to EC directive 50 mm EC towing eye, clip-on shoe Tyres 285/65 R 22.5 Permissible total weight 19,000 kg Mercedes-Benz OM 460 LA engine, 375 KW at 2,000 rpm. Euro Mot III B emission standard Load-dependent control of the material feed incl. automatic scraper floor reversing Fuel tank 600 liters Radio remote control complete hydraulic drive hydraulic support legs Separate drive feed roller/scraper floor "TwinDrive" Paintwork RAL 2011 deep orange Condition of the machine The machine is in a technically and visually good condition and ready for use. New diesel engine at 10,310 hours! Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects This is not a binding offer. Subject to prior sale and technical ...
Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request
11 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 11000 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 3 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 84 Scope of Delivery 04 x Stand 10300 x 1100 mm galvanised 36 x Truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded fram ...
18.50 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 18500 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 5 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 140 Scope of Delivery 06 x Stand 10300 x 1100 mm galvanized 60 x truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded ...
Specifications Cutting width: 3.8×48 mm Year of construction: 1992 Productivity: approx. 40 sheets (A4, 70g/m²) Price: on request Cutting speed:- Safety level: P3 Power supply: 400 V / 2.2 kW Machine is fully functional, after technical supervision.
SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...
Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination
Packaging machine from a reputable manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with adjustment options for welding time, shrink time and shrink temperature. - Maximum package size approximately: length 700 x width 600 x height 250 mm. -Perforation possible via two adjustable needle rings. -Equipped with 2 electric holding magnets for the hood. -2 fans to distribute the hot air. -Roller holder movable. -Adjustable product slot. -Machine can be moved with castors. The machine can be demonstrated under electricity.
25.80 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 25800 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 7 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 196 Scope of Delivery 08 x Stand 10300 x 1100 mm galvanised 84 x Truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded ...
Shrink tunnel from a German manufacturer: -Tunnel opening approx. 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m/min. -Choice of fixed or center-rotating tunnel bars. -The hot air flows can be adjusted separately at the top and centre via deflectors. -Ground air at the bottom can be switched on separately. -The machine can be pushed or fixed by means of lockable castors.
Nagy PB-80 Basic field for pallet racks At standard pallet height (1.20 m), you can install 6 crossbeam levels in the 10.3 m high rack. Together with the storage spaces on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet spaces per shelf area with 4 pallets per compartment. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded frames, the bolted truss (diagonal and cross struts) allows the easy replacement of individual components in the event of damage (e.g. due to forklift trucks). Profile: The profile size of 80 x 60 mm is a typical dimension for medium to heavy pallet rack supports to ensure the necessary buckling stiffness at heights of over 10 metres. Manufacturer: Nagy Type: PB-80 Stand height: approx. 10.30 m Stand depth: approx. 1.10 m Stand Type: PB-8 ...
7.4 m Nagy PB-80 Pallet Rack At standard pallet height (1.20 m), you can install 6 crossbeam levels in the 10.3 m high rack. Together with the storage spaces on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet spaces per shelf area with 4 pallets per compartment. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded frames, the bolted truss (diagonal and cross struts) allows the easy replacement of individual components in the event of damage (e.g. due to forklift trucks). Profile: The profile size of 80 x 60 mm is a typical dimension for medium to heavy pallet rack supports to ensure the necessary buckling stiffness at heights of over 10 metres. Manufacturer: Nagy Type: PB-80 Shelf length: approx. 7.40 m Stand height: approx. 10.30 m Stand depth: approx. 1.10 ...
Nagy PB-80 Pallet rack attachment panel With a standard pallet height (1.20 m), you can install 6 crossbeam levels in the 10.3 m high extension field. Together with the storage spaces on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet spaces per shelf area with 4 pallets per compartment. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded frames, the bolted truss (diagonal and cross struts) allows the easy replacement of individual components in the event of damage (e.g. due to forklift trucks). Profile: The profile size of 80 x 60 mm is a typical dimension for medium to heavy pallet rack supports to ensure the necessary buckling stiffness at heights of over 10 metres. Manufacturer: Nagy Type: PB-80 Stand height: approx. 10.30 m Stand depth: approx. 1.10 m S ...
Key data: 3100 mm, 3 mm
- CNC control and electric 3x 400V, 50/60 Hz - CNC backgauge 5 – 750 mm - Machine frame with knife bar - Hold-down device with plastic coating - Sheet metal hold-up system - Cutting sorting system to the front and rear - Foot lever for adjusting the cutting material diverter - Built-in special knives (suitable for stainless steel) - Cutting gap quick adjustment - Cut line lighting with LED - Standard table trays - Front clippings collector - Safety device - (Protective fence right and left, light barrier) Working length: 3100 mm Sheet thickness steel: 3.00 mm Color: white / grey / yellow Dimensions: 3920 x 2370 mm with hold-down device Throat: 5-750 mm Speed: 26 strokes/min with angle stop Cutting angle of/up to :1000 mm Cutting angle: 1.1 degrees Min. back gauge: 5 mm Max. back gauge: 750 mm
Inv. Num. : 5464 Type: 1250x1.2 Producer: China Created: 2014 Parameters: Maximum sheet thickness when cutting: 1.2 mm Maximum length of sheet plate: 1250 mm Equipment: 7-cylinder sheet metal straightening machine 2 knives for longitudinal cutting Unwinding and rewinding of sheet metal
150 m pallet rack Jungheinrich type MPB Used goods very good condition, see pictures Height 3.9 m Depth 110 cm, blue Load 8.4 tons Beam length 2.7 m yellow Carrier with ballast /compartment 2400 kg Negotiation price: € 8.990,-- net from stock Offer consists of: + 52 pcs. frame pre-assembled, depth 110 cm, height 3.9 m +204 pcs. beam, length 2.8 m, 2400 kg ballast/compartment +408 pcs. Suspension locks +208 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale ...
Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. Output max. 22 packs/min., depending on the format Straight infeed Sealing width max. 440 mm 2 infeeds: For cartons and bottles Cartons, insertion length 60-360 mm, insertion width 60-200 mm, insertion height 30-165 mm Bottles, insertion width/Ø max. 41 mm, insertion height max. 180 mm Packing material PE/PP Film width max. 345 mm Format change approx. 15 min. Stacking device Shrink tunnel Skinettatherm with 2 blowers, 20-600°C Outfeed conveyor after shrink tunnel 1,200 x 380 mm PLC Siemens S7-300, touch screen Siemens Simatic TP27 Drive 400V/50Hz
Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 ...
Specifications Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW the safety level 2+1 wg DIN 32757 P-3, O-2, T-2 wg DIN66399 pt. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW Machine is fully functional, after technical supervision. Price also includes paint renovation.
Load per column: 0 Load per cantilever: 0 Cantilever lenght: 250-800 mm Rack height: 2250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1050 mm, 3 mm, 1000 mm
Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg
VMI 3500L mixing vessel 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph
Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately
Balancing valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M28/PCN 805 793 -Connection: 28 mm -Price: per piece -Number: 4 piece -Dimension package: 255/90/H90 mm -Weight: 1.1 kg/piece
Universal Rotor Shears UC 1500 Power 2x55 kW Cutting unit ejection opening: (width x length) 1124 mm x 1520 mm Rotor shaft speed 1: 16 rpm Rotor shaft speed 2: 16 rpm Knife width: 70 mm Number of Knives-4 EZN Infeed Lugs Incl. hopper, pusher without hydraulic unit
VMI 2936L mixing vessel 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph
Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail -Stop: shaft Ø 32 mm -Length unit: 1263 mm -Dimensions: Ø 32 x 1830 mm -Weight: 11 kg
Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: T (Thyssen) Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,100 mm Number of bays per row of shelves: 05 pcs. á 2,700 mm Number of levels plus floor level: 02 pcs. Volume Specifications: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Profile dimensions: 100 x 65 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 2,200 mm high 1,100 mm deep 20x Pallet rack trusses, used Ma ...
Used sharpening machine by AASTET type AEAN capacity 500 kg per hour. New 1978
Very massive welded shelf trolleys from engineering companies, very resilient. Price per piece 4 pcs. available Approx. 200 cm wide, 85 cm deep, 154 cm high
WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment ...
Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail -Stop: shaft Ø 32 mm -Length unit: 1613 mm -Dimensions: Ø 32 x 1845 mm -Weight: 11.3 kg
120 m pallet rack Galler New & used goods very good condition, see pictures. Height 5 m Depth 110 cm, blue Capacity 12 tons Beam length 2.95 m yellow Carrier with ballast /compartment 2550 kg Negotiation price: € 14.990,-- net from stock Offer consists of: + 41 pcs. frame pre-assembled, depth 110 cm, height 5 m +240 pcs. beam, length 2.95 m, 2550 kg ballast/compartment +480 pcs. Suspension locks + 82 pcs. concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale res ...
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal clamp: clamping range up to 85 mm -Load capacity: kg -Dimensions: 300/80 / H330 mm -Weight: 13 kg
Key data: 48 KW, 60 kVA, 400 V
PTO generator 60 kVA and with switch, field and house operation for IT & TN network and insulation monitoring Technical Data Generator: Generator manufacturer: Endress Generator Type: PRO18L G/4 60KVA Gene. No.: on request Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - phi 0.8 Speed: 1500 rpm New PTO generator 60 kVA – Brushless with electronic voltage regulator AVR – Synchronous – Switchable between field and home operation (TN / IT network) with insulation monitoring in protection class IP 44 according to CE (2006/95 EC) TN network for feeding into a building according to VDE 0100-551 Supplement 1 with 1h coded socket. Sockets for Field Operation – IT Network with Insulation Monitoring 230 Volt Schuko / 16 Ampere yes 230 Volt CEE 6 H/ 32 Amp. -/- 400 Volt CEE 6 H /32 Amp. yes 400 Volt CEE 6 H / 63 Amp. ...
30,000 pcs. shelf SSI Schaefer R3000 Used goods, very good condition, see pictures Shelf 1280x600mm Load capacity 80kg Negotiation price: € 12,-- net from stock Larger quantities on request. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)
100 m pallet rack Bito P20 Used goods very good condition, see pictures. Height 6 m Depth 110 cm, galvanized Capacity 12 tons Beam length 2.7 m blue Carrier with ballast /compartment 1800 kg Negotiation price: € 7,500,-- net from stock Offer consists of: + 36 pcs. frame pre-assembled, depth 110 cm, height 6 m +210 pcs. carrier, length 2.7 m, 1800 kg ballast/compartment +420 pcs. Suspension locks +144 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as we ...
For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment
maximum number of results exceeded
please refine your search
