service manual used for sale

Accessories: -Three-jaw Chuck -Steel holder multi fix A -Lamp -Coolant Technical data: Tip height 120 mm Top width 450 mm Spindle passage 23 mm Spindle inner taper MK 4 Plan travel 150 mm Tailstock MK 2 Quill way 80 mm Manual 9 levels Speed range 2 travel of bolt turn 30 3000 rpm

Attachment: Chamber filter press used Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 26 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 9.7 m m² Presses contents: approx. 130 dm3 PCB package length: 1500 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Dimensions: Lxwxh Empty weight: Accessories: depending on the type and customer Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delivery. On these systems, we guarantee between 6 to 12 months. Condition: The plant is located in a very good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility ...

Mobile Auger with hinged hopper. Ideal for filling of silo trucks. The appliance without problems in the open air can be stored by the hinged hopper. The promotion or a change of location is quickly done with the hitch. (Street legal on request possible)Displacement approx. 60 m m³/h, screw diameter 350 mm, length 8 m, spout height approx. 5 m, drive motor 4KW, capacity of the hopper 4 m³. Please request special designs and snails with different services to meet your needs! We almost always have a solution!

CARVING machine type MARIANI PL 8 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.8 spindles distance betwen spindles mm. 420 n.02 rotation speed of spindles rpm 9.000 / 12.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5000 x 2800 H=mm.1500 ( machine assembled ) Volt. 380/50

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repairs of engines ...

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

Italian top make, control Grundig manual-plus V 260, very robust machine! Top width 1500 mm maximum swing over bed 625 mm Spindle bore 105 mm Taper MK 5

Working length: 1020 mm Maximum sheet thickness: 2.5 mm Maximum opening width: 48 mm Bending angle: 0-135 ° Width: 1350 mm Overall width: 820 mm Height: 1140 mm Approximate weight: 285 kg FEATURES -Universal bending machine for sheet metal working and repairers -Sturdy construction in modern design -Easy adjustment of the upper beam by means of foot pedal, hands are free for the workpiece - manual bending machine for standard bending tasks -Segmented clamping beam for a large number of bending possibilities -Optimum price-performance ratio -Faster and easier bending operation via handle -Non-slip rubber coating on the foot pedal for safe working -Easy adjustment of the lower beam on the corresponding thickness -High upper beam for the manufacture of highly bent profiles Action price, including free home delivery to 1 address Germany (Mainland)

High-efficiency dynamic classifier (separator) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel equipped with 64 blades, outer ring equipped with 36 manually adjustable counter-blades, incl. drive. In very good condition.

Complete System YOM 1998 - installed 1999 - still in production - Avantra 44S with 3600 dpi - Online-Rapiline for Avantra44 - Basket, Cables, all complete System with Service-contract, complete tested and cleaned Available: in Produktion

SUB: FOR SALE... MITSUI MAN B & W 6L 60MCE NEW MAJOR PARTS . HAVE A GDY SIR; WE VE NEW UNUSED MAJOR PARTS OF MITSUI-MAN B & W 6L 60MCE ENGINE. PLS FIND LIST AT BELOW. IF YOU'VE ANY FURTHWER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. ALL PARTS READY TO INPSECT AND TRANSPORT. NEW CYLINDER LINER 2 NEW PISTON HEAD 1 NEW WATER JACKET 1 RECON FULL CYLINDER HEAD 1 NEW INJECTOR ATOMIZER 3 NEW SCRAPER RING 332C F/G 4 NEW SEALING RING PACK 332C / C 2 NEW SPREADER RING 332 CE 8 NEW STUFFING BOX O-RING 3 NEW PISTON ROD O-RING 12 PISTON STOPPER 332B 14 Capt. Ayhan Ugurluba Best Regards ; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

CARVING machine type ANDREONI STANDARD AL 12 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.12 spindles distance betwen spindles mm. 300 n.02 rotation speed of spindles rpm 12.000 / 18.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5100 x 3100 H=mm.1500 ( machine assembled )

HAVE A GOOD DAY SIR. WE VE 1 PCS NEW UNUSED 1 PCS REBUILT WOODWARD UG ACTUATORS AT OUR STOCK . PLS FIND PART NUMBER AT BELOW PART NO. A8251-568 GG A8251-000 6 - WE VE 8 PCS USED WOODWARD UG ACTUATORS. PLS FIND SERIAL NUMBER AND DTLS AT BELOW.. PART NO. A8251-568 GG A8251-568 A8251-568 CW A8251-568 GH A8251-568 GG A8251-568 GG A8251 006 6 A8251 560 MH IF YOU INTEREST WE WILL OFFER YOU. ALL PARTS IN IZMIR TURKEY IF YOU'VE ANY QUESTIONS PKS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Assembly table for structural timber elements, length max. 6000 mm, max. 3000 mm wide, 5 trapezoidal spindle ? clamping system manually, mechanically over the length of 6 m distributable, tubular steel structure with height-adjustable feet hot-dip galvanised, ideal for flying mount. Table can be extended if necessary and be equipped with more spindles or press items for an additional fee. The table is positioned behind the vertical panel saw, and can be visited if you are interested on the spot! Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

FOR SALE: B & W HOLEBY 5L 23/30H MAJOR PART HAVE A GOOD DAY SIR WE VE BELOW LISTED MAJOR part OF MAN B & W HOLEBY 5L 23/30H GEN SET AT OUR STOCK.. 1 PCS STANDART SIZE CRANK SHAFT (YOB 1994) 7 PCS CYLINDER HEADS (CRACK FREE & SEALING SURFACE NOT WELDED BEFORE, EXH SEATS IN NOMINAL SIZE ) 10 PCS PISTON STD GROOVES 10 PCS CON RODS CRACK FREE 8 PCS FUEL INJECTION PUMPS (L ORANGE) 2 FRESH WATER PUMPS 1 OIL PUMP 1 FUEL OIL FEED PUMP 2 PCS AIR STARTER COMPLETE T/C NR 15 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

generally refurbished; for roasting batches between 8 and 15 kg of green coffee and roasting time between 10 and 20 min.; heating according to customer requirements with natural gas or propane including cooling tray, new roasting cyclone, new burner and manual control with three digital temperature dislays paint according to customer requirements extension with raw coffee supply and flue gas cleaning according to customer request

3 x Used Gas Generator Set JENBACHER Type: J 320 GS B02 / B05. With Control Panel and all standard accessories. two engines have been overhauled. 1x Motor KW / RPM: 852 / 1500 2x Motor KW / RPM: 1034 / 1500 --- Volts: 400/231 --- Hz: 50 --- Brandstof: Natural Gas --- Generator Type: Stamford --- Bouwjaar: 1996 / 1997 --- Draaiuren stand: 52.000 ---- We are located in the Netherlands (Province South Holland). In our stock we have more gas and diesel generators. For more information please feel free to contact us. You can call our language lines and speak to someone in one of the languages we support. Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English ) +31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English ) Modderkolk Horti Services Gas Power Holland

Type: 2SQ4000/1800, circular-swinger, screen area: 1,800 x 4,000 mm, with new semi-mobile steel construction with platform for service and maintenance, sand-blasted and new coloured

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

<br>Gathering machine Clamping element with manual installation 20 stations TO 803 20 Controls Wrong &amp; double sheet control Intermediate modules Installation element Hand system Adhesive Binder 20 pliers Vibration station Peace table Folding Anpre station S-FR and roughened station Popular B Hotmelt R ckenleimwerk Squeegee control Hotmelt side glue works Premelter Gauze station Scales cover feeder Groove Station 2 to 6 times Handling pressure Niederlegevorrichtung<br><br>Still in operation: No.<br>Available: immediately

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use

Fully automatic unwinding reel Remote control console Automatic and manual working mode Fine adjustment of speed Potentiometer Simply synchronized with punching machine Reel motorized, with Central Expansion Reel run both directions, prewaerts and rueckwaerts with loop sensors control Speed from 0.1 to 30 RPM rpm Engine with gearbox Reel max load 1 ton Winder strip width up to 300 mm Inner diameter 250 mm min max. 500 mm Outer diameter max. 1300 mm Power 0.37 KW Dimensions 1,200 mm x 1,200 mm height 1,600 mm with CE certificate in stock 2 essa, 2 shaal and 12 brother general overholt punching machines

Maja Skinny, derinder, with in feed belt, cutting width 434 mm, manual and automatic operation. The machine is immediately available and can be tested in Koblenz, Germany.

System: 1-track rotary cup filler Performance: 1,500 - 1,800 cups per hour Cup diameter: up to 100 mm Dosing system: movable piston-valve filler Cleaning: Manual Filling volume: e.g. 100 500 ml (adjustable) Casing and frame: Stainless steel 1.4301 and MAKROLON Control: Siemens SP 7 with 4" touchpanel and colour display Power: 0,9 kW / 400V - 10A Air consumption (at 6 bar): approx. 340 l / min Weight (net): approx. 500 kg Dimensions (L x W x H): Basic dimensions: 820 x 820 x 1.600 mm including filler and evacuation: about 2,000 x 1,300 x 1.600 mm Machine stations basic version: - Cup magazine with automatic destacking - Piston valve filler for pasty products, e.g. Greek yoghurt, fruit yoghurt, cream, etc. Volume: e.g. 100-500 ml (others on request) -Board magazine and trailer -Hot sealing station -Cups lift and pull Options: -transfer dev ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

A latch is manually placed on the filled bottle. By pressing the Capper on the lid of the screwing process starts automatically. An additional operating of a lever or button is not necessary. Technical data: -pneumatic type -Adjustable torque -automatic pressure start -40 mm standard screw head (suitable for z.B: Ø 28 mm cover) -50 mm screw head available (can be used up to approx. Ø 40 mm cover) -Capacity: approximately 500-700 / HR -Working pressure: 5 bar Max -Torque: 4 16 kg / cm -Weight: approx. 700 g

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

The fishing and packing plants have a simple and this stable and torsion-free construction. The machines are characterized by ease of use, flexibility, reliability and low maintenance requirements. The CAMBORIT clip has a capacity of up to 125 packs / min. 1 x 2 bottles can be packed with the CAMBORIT clip. To do this from flat so called "bars" cut to shaped, that get caught under the edge of the bottle. The machine can be operated automatically or manually. Display and operating elements are located on the control panel. All functions are controlled from the control panel and controlled. Errors of the cycle are displayed on the control panel. Action: At the beginning of production the magazine must first cut to be filled. The minimum level is cut to the magazine below, the machine will not turn on. After switching on the machine when existing minimum level of bottles with a capac ...

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

Cat.-nr. 14-00219 Pressure tank/beer tank Storage tank 1250 liters in AISI 304 Test pressure: 1,5 bar, Operating pressure: 0,99 bar – NEW Material: V2A – AISI 304 (1.4301) Surface inside IIIC Year of construction: 2014 Upper body: Manhole lid round DN 400 with 5 screws 1 Thread connection DN 50 With handle bar Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a manual lift truck or a pallet truck from all sides measurement and weight: total height: 1950 mm tank body height: 1200 mm diameter: 1150 mm weight: 145 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 immersion socket for temperature control Temperature co ...

Producer: Handtmann Type: FA 30 TOP Power supply: 400 V - Hydraulic - 30 Litres - Control manual - With calibration gear Ask for an offer

MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.

Technical data: Kreuzmayr Entstein / Passiermaschine hours service approx. 650 kg / h stainless steel condition: as good as new (Errors and omissions in the technical data, information and prices and subject to prior sale.)

Stratec / Bull fill level inspection. Suitable for liquids wihout foam. User manual incluted Pusher incluted.

SUB: FOR SALE... NEW UNUSED CRANK SHAFT ONE SULZER 12 ASV 25/30 AT TURKEY HAVE A GDY SIR WE VE NEW UNUSED CRANK SHAFT OF ONE MAN 12V 25 / 30 (SULZER 12 ASV 25/30) AT OUR STOCK. THIS CRANK SHAFT SUPLIED VIA MAN DIESEL TURBO WE VE ADDATIONALY NEW FULL 1 COMPLETE SET BEARINGS. AND COUNTER WEIGHTS PLS FIND SPEC AT BELOW. SERIAL NO.: 1102209020 (206061045) GRANTHALAYA.ORG NO: 020.08.K. DRAWING NO: 055/057/059/ 221 APROVED VIA: LLOYDS TYPE: ONE 12V 25/30 (SULZER ASV 25/30) READY TO DELIVER. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: &amp;bull; Thread cutting coolant/fluid pump &amp;bull; electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) &amp;bull; manual central lubrication &amp;bull; manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle drive ensures  ...

ITW GEMA PG1 Repair of your powder guns , repair and repair for Powder coating. Powder gun PG1 in exchange old for top repaired. Spare parts constantly in stock . Pradler Machines Service email:info@pradler Tel:05242/43186

AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...

SUB: FOR SALE...1 STORK WERKSPOOR R156 HAVE A GDY SIR,. WE'VE 1 PCS STORK WERKSPOOR COMPLETE ENGINE FOR SALE. TYPE. R156 MOTOR NO. 20766 P.K. 205 RPM 1200 YOB. 1975 IF YOU INTEREST PLS DO NOT HESITATE TO CONTACT WITH US.. EX STOCK .ENGINES READY TO TRANSPORT. Capt. Ayhan Ugurlubay With kind of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE SULZER ASV 25/30 ENGINE NEW GENUINE SPARE PARTS AT TURKEY HAVE A GOOD DAY SIR. WE HAVE MANY NEW GENUINE SPARE PARTS OF SULZER ASV 25/30 ENGINE AT OUR STOCK. WE VE 200 ITEMS AT OUR STOCK. PLS FIND 100 ITEMS WITH PARTS NUMBER ON BELOW. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US.. NO. ONE - SULZER 12 ASV 25/30 PART NO. 1 NEW CYLINDER LINER 5001001 1 PCS 2 NEW PISTON 3404001 4 PCS 3 NEW CAM SHAFT SECTION 10107001 3 PCS 4 NEW COMPLETE LUBRICATION PUMP 30004 K 1 PCS 5 RECON CONNECTING ROD 1 PC 6 NEW LOWER CRANK BEARING D = 225 MM 02103 B 7 PAIRS 7 NEW UPER CRANK BEARING D = 225 M 02103A 7 PAIRS 8 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 9 NEW THRUST BEARING HELPED 2103001 2 PAIRS 10 NEW BOLT WITH OVERSIZE 701007/0VERSIZE 12 PCS 11 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 12 NEW BEARING SHELL HELPED D = 194.5MM 03004B 511200- ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...