service manual used for sale

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145

Faber SMESAMA Manual disk cutter 2020, Stainless, manual disk cutter is used to make disks or half wheels from cheese wheels with rind or previously scraped, max input product size 500mm diameter and 320mm height, 4 disks per min, 3Ph

Manual spindle press, - Maximum filling height: approx. 90 cm, - Pressing area: 102 x 72 cm, Maximum fill level: approx. 90 cm, Pressure area: 102 x 72 cm

Forklift hydraulic/manual operations, max load wight 600 kg

New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-44803-297

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

With double rotating brush, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-44803-168

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-44803-67

With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-44803-58

2 - the black and white Auction-ID: A7-45167-51

Spur gear block hoist, spur gear chain hoist, manual chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1000 kg -Max. Stroke: 4800 mm -Dimensions: 280/600/H190 mm -Weight: 38 kg

Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

- Includes:. - PRAMAC GS hand pallet truck: serial number 723083, year of manufacture 2004, load capacity 2500 kg, fork dimensions 1150 x 700 mm. - BONZONI hand pallet truck: serial number TSM9611806, year of manufacture 1996, load capacity 2200 kg, fork dimensions 1150 x 700 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-24

Manual Powder Coating System – Control Unit General data: Equipment type: Control unit (gun controller) for electrostatic powder spraying Weight: approx. 100 kg Dimensions (L x W x H): approx. 600 x 800 x 1100 mm Technical details: Power supply: 85 – 250 VAC Frequency: 47 – 440 Hz Air control: integrated connections for airflow regulation Description: Manual powder coating control unit designed for electrostatic powder spraying applications. The system allows precise control of coating parameters and airflow, ensuring efficient and uniform coating results in industrial environments. Auction-ID: A7-45351-5

• Lot of 4 manual die press • Piston diameter approx, 38 mm Auction-ID: A7-44536-617

- Fork dimensions 1150 x 680 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-40

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-294

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-99

Spacing : 2000 mm Permissible diameter on bench : 720 mm Diameter on straggler : 430 mm X stroke : 410 mm Z stroke : 2000 mm Spindle speed : 1 – 1800 rpm Spindle bore : 106 mm Spindle nose : DIN 55027 size 11 Installed power : 28 kW Power supply : 400 V Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-206

Complete with support; Supply voltage: 220V, 50-60Hz; Power: 30 Watts. Serial: DSA 99015 Estimated weight: 10 kg Approximate dimensions: 360x340xh310 mm Auction-ID: A7-44996-191

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-293

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-295

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-296

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-297

Soxtec FOSS ST 243 Manual Extraction System Semi-automatic laboratory extractor Reference : ST243 SOXTEC With Controller: CU 2046 Control Unit Year of manufacture: 2016 Without accessories Animal feed, feed ingredients, fodder, pet food, human food, food ingredients, grains, cereals, oilseeds, DDS, meat, meat products, fish, fish products, dairy products, environmental products (e.g. soil, sludge, wastewater) and other industrial products (e.g. pulp, textiles, rubber, tobacco, fertilisers, detergents, plastic materials, etc.). Crude fat, total fat and extractables

Manual press, column passage: 651mm; plate 500 x 500mm. Serial: 515988 Estimated weight: 300 kg Approximate dimensions: 1200x800xh1600 mm Auction-ID: A7-44996-183

1x manual hydraulic scissor lift table, load capacity 250 kg , year of man. 2004 Auction-ID: A1-45187-381

High lift manual pallet truck, 1000kg max, S/No 470714, ANR 2467 Auction-ID: A1-45187-167

1 x Manual hydraulic scissor lift table, load capacity 250 kg , year of man.2004 Auction-ID: A1-45187-382

1 x Manual hydraulic scissor lift table, load capacity 350 kg , year of man. 2023 Auction-ID: A1-45187-383

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

Max. basket weight:50 kg Temperature for washing water:0-60 °C Electrical heating power:2 kW Rated power supply:230 V Machine size LxWxH:600x800x1650 mm Machine weight:90 kg DIMENSIONS DxWxH 600x800x1650 mm POWER SUPPLY 230 V DETERGENT water PUMP POWER 1.2 kW TANK CAPACITY 100 l LOAD CAPACITY 50 kg HEATING ELEMENTS POWER 2 kW HEATING TEMPERATURE 0-60° WORKTOP DIMENSIONS 750x550 mm WEIGHT 90 kg