screw pump used for sale

For screwing steel or aluminium profile sheets. 5 boxes of 500 pieces. Auction-ID: A1-50529-235

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ballfood Extru25 screw extruder Screw extruder designed for high capacity dough production, variable speed, with ball rolling machine, 1Ph

Key data: 8 bar, 45000 L/min

RENNER RSF 250 D-7,5D Screw compressor. Oil-Free. Motor power: 250 kW. Air flow: 45,000 liters per min. 45 m3 per min. Working pressure: 7.5 bar. Maximum allowable pressure: 13 bar. Soundproof enclosure. Electronic control with digital display. Fully automatic operation. Serial number: 545073.

Total rated power: 250 kW. Maximum working pressure: 4 bar. Rotational speed: 1,879 rpm. Gross weight: 5,662 kg. Technology: variable speed drive VSD. Air quality: oil-free, ISO 8573-1 Class 0. WEG frequency converter. Serial number: APF239403.

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

The machine is equipped with a tailstock, a Multifix tool holder, and a digital readout from the manufacturer ACU-RITE. The machine comes from a training workshop, therefore the lead and feed screw are covered. Additional technical specifications: • Center height over cross slide: 90 mm • Center length: approx. 900 mm • Center height over bed: 170 mm

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

KNUTH Basic Plus L&Z Lathe /Year 2011 -Tip height 150mm -Max turning diameter 300mm -Max turning diameter over support 178mm -Max. turning diameter without bridge 430mm -Tip width: 810 mm -Spindle bore: Ø 38 mm -Spindle speed: 60–1,550 rpm, 9 steps -Automatic longitudinal/plane feeds -Spindle mount: Camlock D1-4" -Tailstock cone: MK 3 -Quill stroke: 100 mm -Bed width: 180 mm -3-axis digital display -Multifix quick-change holder with insert -Electric lining protection -Work light -Rotating center punch tip -3-jaw chuck -2x bezels -Documentation Dimensions: LxWxH 1.6x0.7x1.2 meters / Weight 520Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm / Stepless speed adjustment -Coolant pump -Lining protection -Three-jaw chuck -Quick-change holder Multifix & insert -Documentation Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

22x Various heavy duty screw clamp in different size and type. Dimension 900 x 350 x 400 ( LxBxH in mm ) Weight approximate 60 Kg Auction-ID: A7-50717-36

30X Various heavy duty screw clamp in different size and type. Dimension 550 x 600 x 500 ( LxBxH in mm ) Weight approximate 45 kg Auction-ID: A7-50717-33

17x Various heavy duty screw clamp in different size and type. Dimension 1100 x 400 x 400 ( LxBxH in mm ) Weight approximate 60 Kg Auction-ID: A7-50717-35

16x Various heavy duty screw clamp in different size and type. dimension 160 x 30 x 600 ( LxBxH in mm ) Weight approximate 75 kg Auction-ID: A7-50717-32

16X Various heavy duty screw clamp in different size and type. Dimension 1200 x 500 x 450 ( LxBxH in mm ) Weight approximate 80 kg Auction-ID: A7-50717-34

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 4 pieces, for machine tools and systems -Thread: M20 x 2.5 -Dimensions: Ø 60/110 mm -Submission/Price: complete -Transport dimensions: 120/120/H110 mm -Total weight: 2.8 kg

Used and unchecked; viewing desired Auction-ID: A1-50737-67

Technical data Manufacturer: Atlas Copco Type: ZR250 VSD Year of Make: 2008 Serial Number: AIF.130552 Working pressure: 8.6 bar Power: 250 kW Speed: 2,430 rpm Voltage: 400 V Control: Elektronikon Configuration Design: stationary screw compressor, control air compressor with connected piping and fitting technology as well as pressure gauge. Auction-ID: A1-50608-38

Kaeser Airtower 11 Rotary Screw Air Compressor Enclosed industrial rotary screw air compressor with Kaeser Sigma Control electronic controller and integrated air-treatment equipment. Manufacturer: Kaeser Model: Airtower 11 Configuration: Enclosed rotary screw compressor with Sigma Control and integrated air treatment Certification: CE marked Maintenance: Service label indicates maintenance involving suction, oil and separator filters Condition: Used Approximate dimensions: 900 × 800 × 1,600 mm Approximate weight: 350 kg All descriptions are indicative only. Auction-ID: A1-50546-81

Technical data Manufacturer: KAESER COMPRESSORS Type: ASD 37 Product no.: 100604.1 Serial No.: 1542 Year of Make: 2007 Nominal power: 22.0 kW Engine speed: 2,945 rpm Max. operating overpressure: 11.0 bar Control: SIGMA CONTROL Configuration Design: encapsulated screw compressor Auction-ID: A1-50608-39

Used and unchecked; viewing desired Auction-ID: A1-50737-26

Used and unchecked; viewing desired Auction-ID: A1-50737-97

Used and unchecked; viewing desired Auction-ID: A1-50737-59

Technical data Manufacturer: KAESER Type: ASD 37 Product no.: 100604.1 Serial No.: 1413 Year of Make: 2006 Nominal power: 22.0 kW Engine speed: 2,945 rpm Max. operating overpressure: 11.0 bar Control: SIGMA CONTROL Operating hours: approx. 64,804 h Configuration Design: stationary screw compressor in closed housing design with SIGMA CONTROL control. Auction-ID: A1-50608-41

Technical data Manufacturer: ATLAS COPCO Type: ZR315VSD Serial Number: APF.155681 Year of Make: 2010 Power: 255 kW Working pressure: 8.6 bar Speed: 2,430 rpm Control: Elektronikon Configuration Design: stationary screw compressor. Auction-ID: A1-50608-43

Technical data Manufacturer: ATLAS COPCO Type: ZH7000-6-7 Serial number: AIF106322 Year of Make: 2006 Pressure: 7.7 bar Power: 620 kW Speed: 2,430 rpm Control: Elektronikon Design: oil-free air Configuration Design: stationary service air compressor with connected piping and measuring equipment Control: Elektronikon control unit Remarks Large-dimensioned ATLAS COPCO service air compressor, type ZH7000-6-7. The unit is integrated into an existing industrial compressed air system on site. Auction-ID: A1-50608-15

Used and unchecked; viewing desired Auction-ID: A1-50737-124

Rotary screw air compressor with SIGMA CONTROL 2 controller and Siemens IE3 three-phase motor. Year of manufacture: 2014 Serial number: 1007 Material number: 101316.1 Rated motor power: 75 kW Maximum working pressure: 8.5 bar Motor voltage: 400 V, delta connection Frequency: 50 Hz Rated motor current: 134 A Motor speed: 2978 rpm Motor protection rating: IP55 Ambient temperature range: +3°C to +45°C Auction-ID: A1-50699-22

Stationary rotary screw air compressor in a metal enclosure. Control panel with start/stop buttons, automatic/continuous operation selector, pressure gauge, temperature gauge, hour meter and intake filter indicator. Auction-ID: A1-50699-23

Power supply: 400VAC / 3 phases / 50Hz, Noise level: 71 dBA, Air flow rate: Up to 3510 lt/min, Power: 22kW / 30HP, Maximum pressure: 12 bar. Auction-ID: A1-50595-28

turning length: 1000 mm turning diameter over bed: 430 mm turning diameter over slide rest: 235 mm spindle turning speed range: 11.2 - 2.000 U/min spindle bore: 56.0 mm morse taper: 4 MK quill stroke: 135 mm bed width: 333 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 7.75 kW weight of the machine ca.: 1950 kg From a maintenance workshop Good condition () Features: - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws - RSF Elektronik digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - FINN SAFETY foldable chuck guard Type SPS 400 - Sliding tailstock Includes RÖHM rotating center point - Freely adjustable machine lamp - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 , 10

Power requirement: 4.0 kW, permissible Operating pressure: 10 bar

The quantity indicated on the sheets is not necessarily guaranteed. Auction-ID: A1-50867-42

max. turning length: approx. 800 mm, centre height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, Fabr. ELESTA, type: VISULESTAIIE, with multifix steel holder, magnetic chuck, coolant device, splash guard and machine light as well as various machine accessories

Key data: 250 mm, 2240 U/min

max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, Fabr. SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest and Multifix steel holder

1x ALMIG VARIABLE 55 screw compressor, power 55 kw 1x compressor with dryer Auction-ID: A7-50851-107

Lying on decking, Customer must be responsible for professional dismantling. Auction-ID: A1-50226-112

• Cylindrical grinding machine HTG600 H.Tschudin built in 1975 • CNC universal tool milling machine Deckel FP4A built in 1985 • Fanuc Robocut a-OB CNC Wire EDM Machine built in 1995

- FIAC NS15-20 compressed air dryer (integrated): power 0.642 KW, refrigerant R134A. - CSC 5H500 compressed air tank: capacity 500 liters. - Operating conditions of this machine: unchecked. - Dimensions for transport: 2100 x 1200 x 1600 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-10

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our fa ...

turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 500 mm spindle bore: 36 mm turning speeds: 30 - 3550 U/min spindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,511,5 m On customer order - Private machine - Accessories: 3-jaw chuck 4-jaw chuck Collet chuck with lever clamping Multifix A + various holders Operating tool Various turning tools Original documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Information: - well-maintained and intact - Permissible total weight: 750 kg - Operating overpressure: 7 bar - Engine: Kubota three-cylinder diesel engine - 98 dB

approx. 10 pallet boxes, various types / colours, detailed overviews included Auction-ID: A1-50060-242

Incly 1x Beko Drypoint RA compressed air dryer, 1x oil / water separator, filter, pressure regulator. Auction-ID: A1-50060-120

greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS  ...

Consisting of 7x MITUTOYO three-point internal measuring screws in various designs and sizes, measuring accuracy 0.005 mm Auction-ID: A1-50626-37

Ingersoll Rand UP5-11c-8 Rotary Screw Air Compressor Manufacturer: Ingersoll Rand Model: UP5-11c-8 Equipment type: Rotary Screw Air Compressor Year: 2006 Serial number: 20060079 CE marked Industrial rotary screw air compressor designed for continuous compressed-air supply in workshop and industrial applications. Technical specifications: Maximum allowable working pressure: 8 bar Input shaft power: 11 kW Motor speed: 2,930 rpm Gross mass: 305 kg Electrical supply: 400 V Phase / frequency: 3-phase / 50 Hz Year of manufacture: 2006 Condition: Used. All descriptions, identification, technical specifications, operating condition, dimensions, weights, capacities and other information are indicative only. Auction-ID: A1-50546-156

Screw Air Compressor Atlas Copco GA15FF Dryer integrated 15 kW 9.80 bar 2.27 m3/min Year of Make: 2016 Hours: 15,914

- FIAC NS15-20 compressed air dryer (integrated): power 0.642 KW, refrigerant R513A. - Compressed air tank: capacity 500 liters. - Operating conditions of this machine: unchecked. - Dimensions for transport: 2000 x 1200 x 1750 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-47

Prologue screw lime spreader Prologue screw spreader for spreading lime and other suitable powdery products. Type: Lime Spreader / Screw Spreader Screw spreading system Large working width Central feed hopper Metal structure Worn equipment Sold in the condition visible in the photos Agricultural equipment designed to ensure a regular distribution of lime over a large width. Auction-ID: A3-46138-36537