135,042 used machines on RESALE, but how to find them? Machine Search
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 4500kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible.
Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 5000kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible.
Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible.
This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details.
Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.
TRUMPF 5130 B23 Year: 2021 Machine - C frame Press beam Spherical bearing of the press beam with press beam tilting On-Demand Servo Drive with 4-cylinder technology Distance measurement system (Y axis) with dynamic deflection compensation Hydraulic oil filling (life-long fill) Backgauge - Gauge fingers (two pieces) MACHINE OPTIONS Extension of the open height/stroke + 230 mm CNC-controlled wedge crowning 5-axis backgauge (X, Delta X, R, Z1, and Z2 axis) TRUMPF hydraulic upper tool clamp Keyboard and mouse Additional screen Shop floor programming TecZone Bend Tool Setup Optimizer (TSO) ACB Wireless (Automatically Controlled Bending) ACB Laser (Automatically Controlled Bending) Tool Indicator Part Indicator Front work area illumination Rear work area illumination Support bracket x 2 BendGuard Automatic
Vacuum/pressure central agitator Manufacturer: Herbst Type: HRZV-S 40 HO Year of Make: 2003 Suitable for mixing powdered and liquid media Parts in contact with the product made of stainless steel 1.4435 (AISI 316 L) Usable volume 8-32 litres Operating pressure -1.0 to +10 bar Temperature range 0-130°C Max. product viscosity approx. 10,000 mPas Agitator tank 75 litres with double jacket 5 litres Feed vessel 3.3 liters, operating pressure 0-10 bar, operating temperature max. 150°C, Fabr. Jentec, year of construction 2015 Centrally located armature agitator, power 0.37 kW, speed range 10-50 rpm, additional conveyor elements on agitator shaft and outer anchor (product-lowering), scraper elements made of PTFE for container wall and bottom, double-acting mechanical seal, sealing fluid silicone oil Eccentrically mounted propeller agitator, 2-bladed Was operated with exte ...
The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.
automatic baler Manufacturer: UNOTECH Type: UPAMAT 130 H5 Year of construction 2025 Operating hours: approx. 1,300 h Technical data: Press force: 1,200 kN / 315 bar Specific pressing pressure: 10.00 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 1,100 x 1,100 mm (H x W) Bale weight: 800 - 1,100 kg (depending on material and bale length) Binding: 5 times horizontally seen in the direction of pressing on the right side Drive power: 1 x 75 kW Oil tank volume: 2,400 litres incl. oil drip pan and leak oil warning device Volume output: - at idle approx. 920 m³/h - Under operating conditions: approx. 410 m³/h Weight output depending on the bulk material: - For 20 to 30 kg/m³ bulk density: approx. 12 t/h - For 30 to 50 kg/m³ bulk density: approx. 20 t/h - At 60 kg/m³ bulk density approx. 24 t/h - At ...
Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500
Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14"–26" Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24" printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening The Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and p ...
Press brake manufactured in 2007. This Gade PS-C 3120 features a pressing force of 120 tons and a bending length of 3,000 mm. If you are looking to get high-quality bending capabilities, consider the Gade PS-C 3120 machine we have for sale. Contact us for further details.
3000 x 100 ton Regularly maintained by Bystronic with recent oil change. Modeva 10 graphic CNC X1, Y1,Y2, R1, Z1, Z2 New Fiessler light guards fitted 2021 Hydraulic top tool clamping Full set of 250 V30 R1 top tool including segmented sections
AZIMUTH H612 clinching press was built in 2021 in Canada by Azimuth Press. The machine is used for the mechanical joining of components made of thin sheet metal, providing an alternative to spot welding. Clinching enables the creation of a durable joint without the need for screws or rivets, while preserving the material’s anti-corrosion coating. As a result, the H612 clinching machine is suitable for the production of ventilation ducts and other components of ventilation systems. The AZIMUTH H612 is designed for machining mild steel with a thickness between 0,3 mm and 1,2 mm. The process begins by placing the sheet metal between the punch and the die. The punch applies pressure to the material, causing localised deformation. Under the pressure, the sheet metal is displaced and formed within the die, creating a characteristic mechanical interlock between the two layers. Once the pun ...
Key data: 75 t
Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm
Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg
For sale is a fully operational, industrial-grade Lindemann SAS 1000 three-dimensional baler, offering reliable performance for scrap metal processing applications. Key Technical Specifications: Type: Lindemann SAS 1000 (Three-dimensional baler) Year of Manufacture: 1993 Drive System: 2 x 90 kW electric motors Cycle Time: 30 seconds Bale Size: 30 x 30 cm Control System: Modern touchscreen display Condition and Logistics Options: The machine is in fully working condition and was carefully dismantled solely due to relocation. We offer flexible delivery and handover options tailored to your needs: Standard Option: Provided in its current condition, loaded onto the buyer’s truck. Turnkey Option: Upon request, we can handle transport, professional assembly, and commissioning at the buyer’s site.
High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km
Grafoteam PST 48 Printing Plate Transport Trolley; Condition New; for panel format 811x1200mm; mobile. Plate trolley Grafoteam PST 48; condition new; for plate size 811x1200mm; mobile.
Technical data press: Manufacturer Paal (Kadant Paal) Type Konti 600 Year of construction 2008 Total operating hours: 23,020 hours Effective operating hours 1st pump: 10,719 hours, as of August 2026 Effective operating hours 2nd pump: 10718 hours, as of August 2026 Effective operating hours 3rd pump: 9,766 hours, as of August 2026 Number of bales pressed 183,075 bales, as of August 2026 Press force main press 158 t Specific pressing force 12.83 N/cm² Filling volume 3.45 m³ Theor. Throughput capacity approx. 1,266 m³/h Throughput under operating conditions approx. 805 m³/h Bale dimensions 1,100 x 1,100 mm, length variable Drive power 2 x 75 kW Total connected load, 135 kW Bonding 5-fold vertical, fully automatic throughput capacities with a Bulk density of 35 kg/cbm approx. 28.2 t//h Bulk density of 60 kg/cbm approx. 45.6 t/h Bulk density of 100 kg/cbm approx. ...
A second-hand line for milling and pressing fruit and vegetable pulp. The line consists of: - BELT PRESS TYPE B FRU 800 HK WITH CONTROL PROBE IN FEED HOPPER FLOTTWEG 2008 - FEED HOPPER MEGA 2012 - ROTARY SIEVE WITH EXTERNAL INFLUX DIA. DRUM 355MM LENGTH DRUM LENGTH 1600 MMDRUM 1600 MM MEGA (FLOTTWEG) 2012/14 - METERING RUNG ELEVATOR - BRUSH POLISHER MEGA 2008 - INSPECTION ROLLER CONVEYOR MEGA 2008 - FLOTTWEG SCREW CONVEYOR 2017 - PULP CONTAINER 400L - CENTRIFUGAL PUMP FOR PULP - 500L FLUSHING WATER TANK - CENTRIFUGAL PRESSURE PUMP - PIPES, FITTINGS, ELECTRICAL CONTROL CABINET FLOTTWEG 2008 - JUICE COOLING SYSTEM STM 2018 - TUBE BEAKER SPOMASZ 2018
Technical data press: Manufacturer: Presto GmbH & Co. KG Type CC 36 M Year of construction 2010 Operating hours 3,641 hours Press force main press 36 t Specific pressing force 467 N/cm² Dimensions of the insertion tray 1,080 x 1100 mm (L x W) Cycle time 34 seconds Filling volume / pressing cycle 0.85 m³ Theor. Throughput capacity 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale dimensions 1100 x 750 mm (W x H), length variable Drive power 15 kW Tying 4-fold vertical, semi-automatic, with polyester plastic yarn throughput capacities with a Bulk density of 35 kg/cbm 1.8 t/hour Bulk density of 60 kg/cbm 2.5 t/hour Bulk density of 100 kg/cbm 3.1 t/hour Transport dimensions excluding press 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight press approx. 4 t Remarks: The press was checked for funct ...
Technical data press: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2010 Operating hours 3,817 hours, as of August 2026 Number of bales pressed 36,001 bales, as of August 2026 Press force main press 1000 kN Specific pressing force 120 N/cm² Press force cutting edges free kick 121 kN Dimensions of the insertion tray 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 110 kW Current consumption, total 213 A Fuse 250 A slow blow Tying 5-fold horizontally, fully automatic throughput capacities with a Bulk density of 20 kg/cbm 12.86 t/hour Bulk density of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depending on t ...
pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications Maximum pressure: 60 tons Power supply: 400 V/ 7.5 kW Press force: 6.25 kg/cm² Year of construction: 2010 Bale size: 1200x800x1100 mm Price: on request Bale weight: approx. 340-500 kg Machine is fully functional, after technical supervision. If you have any questions, please call us at +48 696 072 985
Press station Stahl PS 46 Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm
Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1983 - Serial-No. 194543 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame
Key data: 22 t, 900 mm, 850 mm
Electric Press Brake Cone C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Antike Stockpresse / Antique Spindle Press Chn. Mansfeld Serial-No. 14101 Pressfläche / Press Area max. 550 x 480mm Presshöhe / Press high max. 660mm Wunderschön verarbeitete antike Stockpresse Beautifully crafted antique Spindle Press
pneumatic Block Gluing Press Wilhelm Leos BLPs pneumatische Blockleimpresse / pneumatic Block Gluing Press Wilhelm Leos BLPs Serial-No. 8487 Pressfläche Breite / Pressarea width max. 420m Einlegetiefe / Insertion Depth max. 500mm Fahrbar auf Rollen / mobile on wheels
Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 66 - 2 ME Baujahr / Year 1999 Arbeitsbreite / Working width max. 660mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Stream delivery with integrated pressing rollers
Key data: 22 t, 900 mm, 850 mm
Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Vertical Press Delivery Heidelberg VSA-66/M.D Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66/M.D Year 2000 - Serial-No. 702101/00-292080 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device
Schließrahmen - Frame KSB Letter Press Heidelberg KSB A4 -1 Frame KSB Cylinder
Schließrahmen - Frame SBB Letter Press Heidelberg SBB - 560 x 820mm
Key data: 44 t, 1600 mm, 1550 mm
Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Spindelpresse / Spindle Press Tränklein SP Spindle Press Tränklein SP
Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4 -4 Frame SBG Cylinder
Schließrahmen - Frame KS Letter Press Heidelberg KS -8 Frame KS Cylinder
Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Fully automatic baler Manufacturer: PAAL Type KONTI 325 G/S/k Operating hours: approx. 39,000 h Year of Make: 2012 Technical manufacturer data: Pressing force: 990 kN at 300 bar Specific pressing pressure: 120 N/cm² Drive power: 2 x 55 kW Pump capacity: 2 x 370 l/min. Total connected load: 150 kW / 260 A Volume output at idle: 800 m³/h Volume capacity at 35 kg/m³: 390 m³/h Performance at: 35 kg/m³ bulk density: approx. 13.50 t/h 60 kg/m³ bulk density: approx. 21.5 t/h 100 kg/m³ bulk density: approx. 33 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical + 3-fold horizontal Machine weight: approx. 28 t Bale weights: 525 to 800 kg including: - Free kicks - Wirbulator 15 kW - Automatic 3-fold horizontal tying with 40 kg wire unwinding device - W ...
used
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm -Weight: 1.5 kg
SANGIACOMO T200 RCE 200T eccentric press was built in 2017 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking, stamping and deep drawing. Its wide range of machining capabilities, combined with a press force of 200 tonnes, makes it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 RCE features an intermediate wheel-pinion gear system. It provides high press force at a reduced nominal speed. As a result, the drive power can be used effectively when operating under high loads. The gears operate in an oil bath, ensuring proper lubrication of the drive components while reducing their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The press also has an overload protection system that protec ...
maximum number of results exceeded
please refine your search
