screw press used for sale

S/s scalding screw, screw width: 800 mm, tier: 270 mm, total dimensions: 3500 mm x 1050 mm x 1270 mm.

S/s scalding screw, screw width: 800 mm, tier: 270 mm, total dimensions: 3500 mm x 1050 mm x 1270 mm.

S/s scalding screw, screw width: 800 mm, tier: 500 mm, total dimensions: 4200 mm x 950 mm x 1630 mm.

S/s scalding screw with infeed funnel, screw width: 600 mm, tier: 290 mm, total dimensions: 3200 mm x 1100 mm x 2060 mm.

S/s scalding screw, screw width: 780 mm, tier: 500 mm, total dimensions: 4450 mm x 1300 mm x 1650 mm.

S/s infeed bunker with screw, diameter screw: 200 mm, tier: 180 mm, total dimensions: 2200 mm x 1000 mm x 1380 mm.

Universal screw and barrel from Italien injection machine for 1000 ccm capacity

Material: stainless steel Double screw: 2 nylon brushes in two sections: ? 200 mm x 3000 mm Quick disassembly Mounted on a mobile frame: 4 wheels Power: 0,55 kw Speed controller : mechanical Support for feeders and dosing systems Overall dimensions 3800 x 550 x 1700

Manufacturer: Netzsch Model: NL 40A Year : 1985 Type : Progressive cavity pump / Eccentric screw pump Power : 1,1 KW Capacity : approx. 2 m3 / h For liquid and semi-liquid products with or without solids.

Manufacturer: K-Tron Model: LWF D5-S + K2M - T20 Type : Twin screw feeder / double screw dosing unit Dosing : volumetric gravimetric Filler mounted on weighing platform Product : powders / granules Motor : 0,45 KW - 2000 rpm Speed reduction : Min: 16,1:1 -> 124 rpm Max: 3.22:1 -> 621 rpm Hopper volume: 50 L Hopper mixing: plow + blade 4 oil dampers Capacity: 275 L / h depending on product. Does not include electrical or safety controls. These elements can be quoted separately.

- Diameter: 250 mm / Center distance 1400 mm - screw thread : 200 mm - Entry: diameter 300 mm - Output: diameter 300mm - Quick disassembly - Pneumatic blow joints - Speed 90 rpm - 2,2 KW motor

Electric screwdriver, built-in screwdriver, screwdriver DESOUTTER Rod screwdriver for screwdriving technology Type: EME 35-20J Torque range: 4.0-15 Nm Speed: max. 2067 rpm Output: 3/8 bit recording Attachment extension: M6 - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 90 x 60 x 950 mm Weight electric screwdriver with mounting device: 4.3 kg good condition; used

Replacement Screw for H&G Screw Compressors

A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm. Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit absorption: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary bezel control) - without screwdriver switch-off - Compressed air control line 4 mm - Compressed air connection for screwdriver function min. 10 mm - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 3 pieces available, price per screwdriver; used

Angle screw-in fitting, elbow screw-in socket, cutting ring fitting, 10 pieces PARKER WE12LR1/2MS Operating pressure: max. 200 bar material : Brass Tube outer diameter: Ø 12 mm male thread: R1/2 ( inch ) width across flats: 19 / 22 mm with nut and cutting ring New ! Also available in other quantities ! Dimensions ( single screw connection ): 50 x 47 x 22 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Screw-on screw connection, with sealing ring, 8 pieces PAGUS G 1/2-17,6x13 mm Material: Aluminium Hose diameter ( inside ): Ø 13 mm Thread ( inside ): 1/2 ( inch ) width across flats: 24 / 27 mm Sealing ring: Ø 21 / 28 mm, material thickness: 2.0 mm similar LANDEFELD ACK 1213 A Other quantities on request ! New ! Dimensions ( single screw connection ): 42 x 30 x 27 mm Dimensions ( packaging ): 150 x 70 x 40 mm

A complete unit is offered.

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Screw compressor, air compressor, compressed air unit, stationary air compressor -Manufacturer: Mannesmann Demag, screw block from compressor type SP-041 -Screw block: Type EK 103NK -Intake unit: Demag type 10483974 with filter -Dimensions: 580/510/H480 mm -Weight: 65 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Screw conveyor: is unused and has no trough (see photos) -Execution: stable -Screw length: 1965 mm -Screw diameter: 265 mm -Screw pitch: 130/230 mm -Tube diameter: 140 mm -Body: steel -Screw blades: stainless steel VA -Drawing with the photos -Transport dimensions: 2880/265/H265 mm -Weight: 146 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Screw conveyor: is unused and has no trough (see photos) -Execution: stable -Screw length: 1965 mm -Screw diameter: 265 mm -Screw pitch: 130/230 mm -Tube diameter: 140 mm -Body: steel -Screw blades: stainless steel VA -Drawing with the photos -Transport dimensions: 2950/265/H265 mm -Weight: 146 kg

Screws, hexagonal screws, flange nuts, hex nuts, collar nuts, solar fasteners, socket head screws -Hexagon head screws/cylinder screws: M 10 stainless steel 330 kg -Hexagon head screws: DIN 933 M10 x 100 300 pieces / M10 x 20 4400 pieces. -Cylinder screws: DIN 912 M8 x 35 6600 pieces / M8 x 30 4200 pieces -Material: A2 stainless steel -Price: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg

Screw Jack with Translating screw BD-125-L-U-3-440-B-SHM ize 125 Worm set Ratio, Lifting screw thread - Low ratio with Single start Lifting screw Direction – Upright Spindle end - Clevis End Stroke length (mm) – 440 Locked against rotation - Stop Nut SM with protection tube Max capacity kN – 500 (50 tons)

Description: No. 746082 Running performance approx. 25,000 b/h with suction regulator, belt pulley, solenoid valve and thermal sensor Screw element comes from BOGE S 75 and fits other BOGE models Approx. Onsite Dimension. (l x w x h): 600 x 400 x 600 mm, weight approx.: 120 kg

Hand screw press, mandrel press, screw press, hand screw press, printing press, balance printing press, 2-column press, column screw press -Manufacturer: Ageo, manual column screw press type 28/510N with solid base frame -Printing capacity: max. 28 tons -Stroke: 315mm -Intermediate size: 510 mm -Table size: 400 x 510 mm, groove width 22 mm -Pitch: 48 mm/rev. -Dimensions: Ø 1600 x H2040 mm -Total weight: 1024 kg

Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Hand screw press, screw press, rotary mandrel press, mandrel press PAGUS Type: M56 stroke: 27 mm Projection: 60 mm stroke: max. 59 mm ( after removing the limiting sleeve ) distance ( table - tool holder ): 90 mm table diameter: Ø 65 mm, central bore: Ø 20 mm spindle diameter: Ø 20 mm, Tool holder: M12 x 1.75, length: 8 mm used, tested ! Dimensions ( ready for use ): 290 x 160 x 380 mm

Hand screw press, Balance METALWAG YB-1 Pressure max: 10,000 kg width between stand: 320 mm stroke: 120 mm Balance diameter: Ø 1200 mm table: 300 x 300 mm Press stamp is missing used, checked ! Dimensions: 1200 x 1200 x 1700 mm

Used screw compressor / screw press Manufacturer: H&G Type: DWF V11 Year of construction: 04.00 Specifications: Weight: approx. 1,800 kg Speed: 10 1/min. Operating voltage: 3/N/PE AC 400 V Frequency: 50 Hz Rated current: 22.5 A

AGEO SP 60/1000 Four-column screw press with hydraulic return stroke Ctgywn3w Year of construction 1998 CE marking Compressive force 60 tons Four management pillars Hydraulic return stroke Clear width between the columns 1000mm Groove table 900x700mm Passage max.415mm Dimensions: LxWxH approx. 1.8x1.5x2.5meters Weight approx. 3000Kg

Hand screw press, without flywheel PAGUS Pressing pressure: approx. 20 t Table surface: 650 x 250 mm ram stroke max: 230 mm Distance table plunger: 40 - 270 mm Groove width: 19 / 31 mm Groove depth: 20 mm Hole hole: Ø 60 mm Flywheel arm mount: 6-edge profile, diameter Ø 41 mm used, tested ! Dimensions: 830 x 620 x 1600 mm

Hand screw press Compressive force: probably approx. 6000 kg Table surface: 390 x 250 mm Spindle diameter: Ø 40 mm ram stroke max: 25 mm distance table ram: 55 mm Projection: 100 mm Dimensions: 440 x 390 x 510 mm

Hand screw press, Balance SPM YB-3 Pressure max: 20.000 kg width between stand: 380 mm stroke: 200 mm greatest height: 320 mm table bore: Ø 76 mm Balance diameter: Ø 1450 mm table: 1120 x 1120 mm Dimensions: 1450 x 1450 x 2110 mm

Hand screw press PAGUS ram stroke max: 22 mm Projection: 55 mm spindle diameter: Ø 12 mm female spindle thread: M6 distance table tappet: 43 mm table surface: Ø 30 mm tool holder in table: Ø 12 mm used, tested ! Dimensions: 185 x 70 x 220 mm

Hand screw press PAGUS ram stroke max: 24 mm projection: 125 mm spindle diameter: Ø 12 mm female spindle thread: M6 distance table tappet: 58 mm Table surface: Ø 32 mm Tool holder in table: Ø 17 mm used, tested ! Dimensions: 260 x 120 x 290 mm

Hand screw press PAGUS ram stroke max: 25 mm Projection: 95 mm spindle diameter: Ø 10 mm female spindle thread: M6 distance table-tappet: 40 mm table surface: Ø 40 mm tool holder in table: Ø 12 mm used, tested ! Dimensions: 200 x 80 x 260 mm

Hand screw press PAGUS ram stroke max: 21 mm Projection: 95 mm spindle diameter: Ø 12 mm distance table tappet: 32 mm Table surface: Ø 40 mm tool holder in table: Ø 12 mm used, tested ! Dimensions: 200 x 80 x 260 mm

Hand screw press PAGUS ram stroke max: 17 mm Projection: 140 mm spindle diameter: Ø 11 mm female spindle thread: M6 distance table tappet: 44 mm Table surface: Ø 25 mm tool holder in table: Ø 8 mm used, tested ! Dimensions: 280 x 210 x 300 mm

Hand screw press PAGUS ram stroke max: 50 mm Projection: 60 mm Spindle diameter: Ø 20 mm female spindle thread: M12x1.0 with adapter to male thread M5 distance table ram: 95 mm Table surface: Ø 70 mm Tool holder in the table: Ø 20 mm used, tested ! Dimensions: 270 x 160 x 390 mm

Hand screw press PGH METALL ram stroke max: 13 mm Projection: 85 mm spindle diameter: Ø 12 mm female spindle thread: M6 x 1.25, depth: 20 mm distance table ram: 36 mm Table surface: Ø 40 mm Tool holder in the table: Ø 12 mm Base plate for clamping in a vice: 117 x 99 x 30 mm used, tested ! Dimensions: 260 x 120 x 290 mm

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.