126,706 used machines on RESALE, but how to find them? Machine Search
Rated power: up to 3000 kg/h Electrical connection: 3.5 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions: Laenge: 3 720 mm Width: 1 730 mm Height: 2 110 mm output or drop-in height: 1 430 mm Width: 660 mm 220 - 440 mm Application shoehe (infinitely adjustable): 10 - 40 mm Weight: 2 200 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.4 - 4.2 m inWater consumption for Cleaning: 10 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 25 High juice drain: 130 mm Hoehe sewage drain: 50 mm Hoehe Marce ejection: 810 mm usable for core and stone fruit Supplied: high-pressure cleaner, compressor Incl. New machine - best condition
used membrane chamber filter press / filter press Netzsch 800 x 800 mix parcels record size: 800x800 mms cake thickness: 32 mms benefit length: 4,768 mms filter surface: 34m? filter pressure: 15 bars record transport: automatically the arrangement is in a very good state.
sell a Strautmann PET BP 900 for PET bottles! Built in 2006, just a few hours of operation!
Rated power: up to 1000 kg/h engine power: engine: 0.75 kW buster cleaning: 0.37 kW high pressure cleaner: 4.7 kW Electrical connection: 400V 50Hz (3 phases) Electrical fuse: 16 A Dimensions: Laenge: 2 145 mm Width: 1 270 mmhoe height: 1 290 mm d drop-off height: 1 290 mm Width: 580 mm Application width: 240 - 460 mm application shoehe (9 steps): 10 - 50 mm Weight: 665 kg Material: 1.4301 / AISI 304 Juice yield: up to 75% band speed (infinite): 2.1 - 5.5 m/min Throughltime: 0.6 - 1.6 min Water consumption for cleaning: 3 l/min Connection: Connection for waste water: DN75 Connection for juice drain: 1 1/2 He juice drain: 305 mm High water flow: 86 mm High disarmer discharge: 745 mm usable for core and stone fruit Supplied New machine - best condition
Power of the engine: 6.5 HP. Sl ė gis: 160 bar. Water access: 170 l/h. arna: 10 m.
used
Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...
used chamber filter press / filter press Passavant 1500 x 1500 record size: 1500 x 1,500 mms chamber number: 127 pieces cake thickness: 30 mms filter pressure: 16 cash Schliessdruck: 380 br filter records: GGG optionally PP filter cloth cleaning arrangement: optionally
Hilge pressure boost pump Mint from spare parts inventory for example, for CIP systems Motor NMG 160 MB242FF300D1 380-415 V 50 Hz 15 KW Q = 22, 5 m m³ / h H = 110 m n = 2900 / min
used
Max. capacity 1000 tons Slide stroke 240 mm Shut-height (max.) 650 mm Wedge adjustment 10 mm Number of slide strokes 100 rp
The BTS-MF200MK is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 ...
Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg
Machine: Chamber filter press Type: UM 1200 x 1200 Execution: filter press Filter plate format: 1200 x 1200 Year of construction: 1977 refurbished 2017 Number of plates: Filter plates: 43 in PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 1560 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Safety device: E.g. photocell etc. optionally on request Buy or rent: Visits of facilities in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.
REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...
Storage Tanks / Pressure Tanks / Beer Tanks in V2A with cooling jacket Test pressure: 2,86 bar, Operating pressure: 2 bar Volume: 1500 Litres -NEW- Measurment and Weight: Total Height: 2609 mm Cyl. Height: 1500 mm Diameter: 1100 mm Weight: 290 kg Material: V2A (AISI 304) 1.4301 Upper bottom: • with manhole Ø 400 mm with 4 x screw • with 2 eyelets • with ventilation system DN 50 • with CIP-cleaning • with downward drawn filling pipe DN 32 with fermentation connector with overpressure valve, with manometer (on extra charge) Tank cylinder: • with ladder hook up • with cooling jacket h=1000 mm • with sample valve DN 15 (on extra charge, with spiral in stainless steel also available) • with immersion socket for temperature indicator and temperature indicator (on extra charge) • on the back of the t ...
Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t
used chamber filter press / filter press used chamber filter press / filter press Passavant 1200 x 1200 record size: 1200 x 1,200 mms benefit length: 4,000 mms record number: 68 cake thickness: 30 mms filter pressure: 15 cash Schliessdruck: 350 cash record material: PP records expiry: unanimously engine tension: 380 volts / 50 hertz record transport: automatically filter cloths: optionally
Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg
used filter press Hoesch - cast iron small filter press from cast iron to the filter of liquids solutions, dirty waters, oil, biooil, rapeseed oil-used - with handwheel - downpour filter records 30x30 cm - with collective tub - tilled manual pump - dimension ca 1,00x0,5x0,7 m - weight approx. 300 kg with hand pump the arrangement stands to the rent and for the purchase at the possession.
Attachment: Chamber filter press - as good as new, demonstrator Type: REWA auto-hydraulic-Tigo3 quick-opening system Model: automatic Chamber filter press with quick draining execution: zero - man operation possible Hours of operation: No Design: page Holm led Filter plates sizes: 1000 x 1000 mm Plate number: 60 Filter plates: PP Thickness: 30 mm Filter cloths: optionally available in voting on the medium Schedule: closed Filter surface: 100 m square Presses capacity: approximately 1480 dm3 PCB package length: 3624 mm Filter pressure: 15 PSI Plate transport: automatically Frame: Steel Q235 Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 12200 x 1500 x 1360 mm Weight: 4000 kg Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand ...
Used chamber filter press knight's house and Blecher R& B 800 x 800 benefit lengths: 3500 chamber number: 64 filter pressure: 16 bars Schliessdruck: min 300 bars, max. 320 bars filter surface per chamber: approx. 0.97 m� whole filter surface: approx. 62 m� cake volumes per chamber: approx. 11.19 litres cake volumes whole: approx. 716 litres record material: Expiry PP: openly service side: on the right light barrier the arrangement is in a very good state.
The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.
Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...
used
Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor
Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG) Purpose: Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG / 10 KN maximum load). Without distance measurement. Manual lifting spindle press - Static pressing force 5 KN (0.5 to) - Portable, stable press frame made of polyamide PA 6G - Manual spindle stroke gearbox with spindle 20 mm, incline 5 mm - With handwheel diameter 120 mm and handle - Gearbox reduction 1: 10, per handwheel revolution 0.5 mm spindle path - This requires only very low hand force. - Table size 235 195 mm - Light width 190 mm - Stamp size diameter 70 mm - With 4 holes 8 mm for fixing a larger stamp plate - Very easy to operate by spindle and worm gearbox - Total weight approx. 25 kg Force measuring device: Weighing module with shear rod load cell for nominal load 1,100 kg. ...
The BTS-MF100 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 100 kg. It is equipped with automatic bale cycle, hour counter and also strap eject system. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 6 Ton Bale weight: up to 100 kg (material depending) Bale size: 850 H (var.) x 980 W x 800 D mm Machine size: 2399 H x 1440 W x 1014 D mm Machine weight: 632 kg Transport height: 2399 / 1876 mm (on request) Loading aperture: 980 W x 480 H mm Cycle times: 28 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB ...
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons
Attachment: Chamber filter press used Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 30 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Procedure: open Open filter surface: approx. 7.5 m square Presses contents: approx. 90 dm m³ PCB package length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Hydraulic pump: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Safety equipment: optional Optional accessories: optional possible depending on design Extensions: In consultation according to the design Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delive ...
DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...
Attachment: Chamber filter press used Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 26 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 9.7 m m² Presses contents: approx. 130 dm3 PCB package length: 1500 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Dimensions: Lxwxh Empty weight: Accessories: depending on the type and customer Special services: Refurbished service to customer specification is optional. The system goes through a service check or a complete overhaul before delivery. On these systems, we guarantee between 6 to 12 months. Condition: The plant is located in a very good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility ...
used
8 color size 1270 mm<br><br><br><br>
Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...
Working length: 1,800 mm equipped with: -2 drilling units with three drills -Insertion device for pot hole hinges -2 Bohraggregte for hinges, etc.
One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...
1 AUTEFA loose stock/flock stampfing press type 6.62 for stamping lose flock into materila carriers for dyeing / bleaching machines, with 2 stampfing arms with motorized rotational carrier support . complete with electrical panel
Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic
CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...
Properties: + Semi-automatic + very good value for money + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + coated knife head + even division of the dough + excellent round inges, the dough pieces + ergonomic knife cleaning position (head swivelable 90 degrees forward) + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES equipment: + 3 impact plates included SPECIAL accessories, available at an extra cost: - additional impact plates for DivObun Size 4-30: EUR 93,-- net / Pcs
maximum number of results exceeded
please refine your search
