screw press used for sale

U-screw Feinmesszeugfabrik Suhl range: 100 - 125 mm TGL 15046/1 with protective box Measuring screw with 100 pitch ! New ! Dimensions: 275 x 170 x 40 mm

U-measuring screw Feinmesszeugfabrik Suhl range: 75 - 100 mm TGL 15046/1 with protective box New ! Dimensions: 250 x 150 x 40 mm

U-touch screw with plate FEINMESSZEUGFABRIK SUHL 0 - 25 mm TGL15046/1 in wooden box Screw with 100 graduation ! used, tested ! Dimensions: 195 x 120 x 40 mm

U-measuring screw FEINMESSZEUGFABRIK SUHL KEILPART SUHL 300 - 400 mm DIN 863/I in wooden box used, tested ! Dimensions: 620 x 375 x 60 mm

U-screw gauge with clock FEINMESSZEUGFABRIK SUHL 300 - 400 mm TGL 15046/I in wooden box Measuring screw with 100 graduation ! used, tested ! Dimensions: 645 x 470 x 55 mm

Digital Micrometer HELIOS Digitrix II 175 - 200 mm in wooden box used, tested ! Dimensions: 395 x 250 x 50 mm

Digital U-Screw HELIOS Digitrix II 150 - 175 mm in wooden box used, tested ! Dimensions: 365 x 230 x 50 mm

Digital U-Clamp with Plate HELIOS Digitrix II 25 - 50 mm in wooden box used, tested ! Dimensions: 265 x 125 x 50 mm

Digital Micrometer HELIOS Digitrix II 100 - 125 mm in wooden box used, tested ! Dimensions: 320 x 195 x 50 mm

U-touch screw with disc Feinmesszeugfabrik Suhl range: 125 - 150 mm TGL 15046/I pitch. 0.01 mm with protective box used, tested ! Dimensions: 330 x 130 x 42 mm

Threaded Screw, Threaded Bracket Gauge, Threaded Screw Gauge with Fine Knife CARL ZEISS Range: 100 - 150 mm M 0.6 - M 10 Measuring Tip M 0.4 - 0.6 is missing ! with protective box used, tested ! Dimensions: 445 x 180 x 50 mm

U-measuring screw FEINMESSZEUGFABRIK SUHL range: 250 - 275 mm TGL 15046/1 with protective box Dimensions: 440 x 275 x 45 mm

Trapezoidal lead spindle DECKEL thread length: 405 mm thread: Ø 24 mm pitch: 4 mm Spare part for tiller DECKEL KF12 ! used ! Dimensions: 700 x 225 x 225 mm

Ball screw Steinmeyer Kd. No. 10964233-1 1500 mm Customer: Ex - Cell - O GmbH New ! with test report Dimensions: 1500 x 120 x 90 mm

Ball screw STEINMEYER 1516.36 / 15.50.1315.2085 2100 mm L51 / 450002184 11009.27472 New ! Dimensions: 2100 x 120 x 120 mm

Ball screw STEINMEYER 10908263 - 1 ( 10908263-1 ) 1750 mm ZZ 00195 - 43 New ! Dimensions: 1750 x 130 x 120 mm

Ball screw PAGUS 10903293 - 1 ( 10903293-1 ) 1750 mm ZSSR 1945 New ! Dimensions: 1750 x 130 x 120 mm

Ball screw STEINMEYER 10908313 - 1 ( 10908313-1 ) 1140 mm New ! Dimensions: 1140 x 110 x 90 mm

Ball screw IBL W148651 1060 mm nut: approx. Ø 109 x 280 mm pitch approx. 20 mm 080-20-64-0755-157 SER. 84584 / 4 New ! Dimensions: 1060 x 160 x 150 mm

Ball screw BLIS Z-Nr. AD.0054.0237 1170 mm L-Nr. 6302415 SER. 84584 / 4 New ! Dimensions: 1170 x 120 x 120 mm

Ball screw A. MANNESMANN Ex-Cell-O GmbH 489783 790 mm 8927 New ! Dimensions: 790 x 120 x 90 mm

Ball screw WARNER ELECTRIC DANA Boehringer F441605101305700 830 mm 005.1117.1143.10 28714 New ! Dimensions: 830 x 80 x 90 mm

Ball screw STAR 1502-3-1085 610 mm AB10L 16 045 New ! Dimensions: 610 x 80 x 70 mm

Ball screw PAGUS S145372 1250 mm 95705 010 0606R5 A1 New ! Dimensions: 1250 x 100 x 90 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 lifting capacity 5 kN stroke: 150 mm spindle: Ø 18 mm used, tested ! Dimensions: 320 x 100 x 85 mm

Load block thread with screw RUD 2 pcs. VLBG 0.63t M10 8500822 Load capacity: 0.63 t New ! Dimensions: (box) 220 x 100 x 100 mm

Cover FP42NC 2387 X-Axis Ball Screw with Nut new! Number according to spare parts plan: 2388-002435 Shipping by arrangement

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

Height 1230 mm Width 980 mm Length 1330 mm Weight 820 kg Power supply: 400V 50Hz 3N Total power 31.1 kW Description Screw compressor Atmos SE 270, 400 V, 31.1 kW 8 bar 4.47 m3/min

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 face slide travel: 290 mm upper slide travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trapezoidal lead screw with screw jack NEFF MULI 1 lifting capacity 5 kN stroke: 150 mm spindle: Ø 18 mm hole spacing: 60 / 51.5 mm 4x threaded hole: M8 x 1.25, depth: 18 mm used, tested ! Dimensions: 320 x 100 x 85 mm

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 2,25/3,25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ball screw INA ZKLF 2068.2RS NA ( ZKLF2068.2RSNA ) 02/W6 ASP 14-20 ( 02/W6ASP14-20 ) thread length: 845 mm thread: Ø 32 mm pitch: 4 mm for AGIE CUT 300 used, tested ! Dimensions: 1200 x 210 x 125 mm

: 0390 mm : 240 mm : 1000 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw block, machine foot, with lock nut AMF NO. 6430 Type 140 Height: 100 - 140 mm Load capacity: max. 60 kN New ! Dimensions 115 x 80 x 140 mm

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw block, machine foot, with lock nut AMF NO. 6430 Type 200 Height: 140 - 200 mm Load capacity: max. 60 kN New ! Dimensions 115 x 80 x 140 mm

Key data: 45 mm, 1350 , 298 U/min

Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Stainless steel screw conveyer length: 15 meters. Diameter: 500mm. With drive electric motors, APV valves, protective covers and accessoiries. Dismantled into 3 lengths.

Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.

Total weight 32780 kg net approx. 29500 pieces More info on request 8.8 DIN 931 Origin: South Korea

Screw support, fixator PAGUS 450 to 660 mm spindle: Ø 58 mm foot: 260 x 260 mm plate: 180 x 180 mm height max: 660 mm height min: 450 mm weight: 34 kg used, tested ! Dimensions: 260 x 260 x 450 mm