We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
used
Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg
used
Electro-Hydraulic Bending Machine Fabr. SCHWARZE-WIRTZ type Perfect WE 40 Dmachine -No: 85500 year 1985Max. Bending capacity: 25 x 2 mmPipe diameter min.: 10 mmMax. Bending radius up to center of pipe: 100 mmminute Bending radius up to center of pipe: 25 mmBending angle max.: 180°Bending direction: LeftMax. Bending speed forfeed stepless: 19 rpm.Return constant: 19 rpm.Drive power: 7.5 kWWeight approx.: 700 kgExternal dimensions L x W x H: 2200 x 1100 x 1100 mmWith- Hydraulic slide rail feed- Creeper control- Footswitch- without toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Compressor black RS 1015 type Rota Nova NK 60 5.5-11 kW / 7.5-15 HP 1.5 m3 / min Ssszy0 L x W x H: 110 x 80 x 100 cm Weight 450 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Mandrel bender schwarze wirtz Year of production 1996 / in 2011 the machine was renovated. Very good condition. Length about 10m Weight about 7t
used
Temperature range: -40C to +50C interior dimensions (usable space) A approx. 500 mm, width approx. 400 mm, depth approx. 800 mm
used
loading capacity: 200 kg dropping height: 1,000 mm
used
tube diameter max.: 38 mm wall strength: 2 mm bar material dia. min.: 10 mm bending radius min.: 35 mm bending radius max.: 150 mm pull up length of tube: 4500 mm bending angle max.: 180 ° accuracy of bending angle: ± 0,2 ° total power requirement: 7,5 kW weight of the machine ca.: 1,2 t - with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² Ã? 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control
used
material width: 300 mm material thickness: 3 mm cross cut: weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5, 1, 1 m Coil Shredder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
tube diameter: 25 mm wall strength: 2 mm bending radius min.: 10 mm Control: bending radius max.: 75 mm total power requirement: 11 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Glass silk nickel braid, cable braid -Type: 1.5 mm² -wire: 1 -Length: 100 m -Weight: 2 kg
used
Lubrication pump, gear pump aggragat SAXONIA ASL 0.1 pn: 1.6 MPa Q: 0.1 l/min engine: 0.12 kW 220 / 380 V Dimensions: 270 x 130 x 160 mm
used
Central lubrication, central lubrication unit, gear pump unit with tank SAXONIA 6.3 L/1 - 0.25 A pn: 1.6 MPa Tank capacity approx. 6.3 l Engine: 60 W 220 / 380 V with approx. 2 m pressure hose and approx. 10 m connection cable ! used, tested ! Dimensions: 430 x 500 x 470 mm
used
Lubrication pump with motor SAXONIA, VEM, ELMO ZE 6.3 L Immersion depth: 90 mm pump diameter: Ø 50 mm Flange diameter: Ø 95 mm pn: 1,6 MPa (16 bar) Engine: VEM 1260.1/1 60 W 1400 rpm 220 / 380 V IP 44 Replacement pump for SAXONIA central lubrication devices !, among others used, tested ! Dimensions: 250 x 110 x 125 mm
used
Central lubrication, central lubrication unit, gear pump unit with tank SAXONIA PZ 0.1 - 6.3 L pn: 1,6 MPa Q 0.1 l/min tank capacity approx. 6.3 l Engine: VEM KMR 56 K 4 0.12 kW 1360 rpm 220 / 380 V 3AC Dimensions: 420 x 180 x 400 mm
used
Lubrication pump with motor SAXONIA, VEM, ELMO APZ 2,5 B ( APZ2,5B ) Volumetric flow: 0.25 l/min Nominal pressure: 1.6 MPa (16 bar) Motor: VEM 1160.1/1 60 W 1400 rpm 220 / 380 V 3AC IP 44 used ! tested ! Dimensions: 250 x 110 x 125 mm
used
Central lubrication, lubrication pump with tank SAXONIA ZE 6.3 L / 0.25 ( ZE3.3L/0.25 ) pn: 1,6 MPa ( 16 bar ) nominal flow rate: 0.25 l/min tank capacity: 6.3 l Engine: ELMO Typ 1260.1/1 60 W 1400 rpm 220 / 380 V 3AC used, tested ! Dimensions: 420 x 180 x 390 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points immersion depth: 170 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 220 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points immersion depth: 170 mm flange Ø 60 mm float: plastic, colour: white level switch for central lubrication ! New ! Dimensions: 220 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points Immersion depth: 170 mm flange Ø 60 mm float: brass level switch for central lubrication ! New ! Dimensions: 220 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point Immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 170 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: white level switch for central lubrication ! New ! Dimensions: 170 x 110 x 90 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG Immersion depth: 260 mm 2 switching points flange Ø 50 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 310 x 70 x 50 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG Immersion depth: 260 mm 2 switching points flange Ø 50 mm float: plastic, colour: white level switch for central lubrication !; New ! Dimensions: 310 x 70 x 50 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG Immersion depth: 260 mm 2 switching points flange Ø 50 mm float: brass level switch for central lubrication !; New ! Dimensions: 310 x 70 x 50 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG Immersion depth: 330 mm 2 switching points flange Ø 50 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 380 x 70 x 50 mm
used
float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG Immersion depth: 330 mm 2 switching points flange Ø 50 mm float: plastic, colour: white level switch for central lubrication !; New ! Dimensions: 380 x 70 x 50 mm
used
Central lubrication, lubrication pump with tank SAXONIA 6.3 L / 1 - 0.63 ( 6.3L/1-0.63 ) pn: 1,6 MPa ( 16 bar ) Rated flow rate: 0.63 - 1 l/min Fuel tank capacity: 6.3 l engine: AEG type AM 63 K Y 4 0.12 W 1300 rpm 220 / 380 V 3AC used, tested ! Dimensions: 420 x 200 x 400 mm
used
Description: Tool trolley with 7 drawers. Tool Trolley has two normal and two swiveling wheels with brake. Through an integrated lock fully lockable tool trolley. Drawers can be locked for each subject. All drawers equipped with quick release and soft close. Tool trolley is equipped with 196 pcs tool parts.: 3 pcs Socket sets: 1/4 'by 4 - 14mm, 3/8' from 6 - 22mm and Torx E10 - E20, 1/2 'from 8 - 32mm.. Various screwdriver sets. Extension for socket sets, various Allen key from 1 - 10mm, different files. Ratcheting wrench set of 6 - 22mm, wrench set of 6 - 22mm. Forceps assortment. Dimensions 78 x 48 x 105 cm. Weight 79.5 kg. Approx. Onsite Dimension. (l x w x h): 765 x 465 x 960 mm, weight approx.: 84 kg
used
Description: Tool trolley Equipped with 4 high-performance castors, 2pcs. with brake. Heavy duty wheels 125 x 40 mm. All drawers are equipped with anti-slip mats. Equipped with 2 robust stainless steel handles. All cupboards and drawers can be locked individually. Solid wood panel 4 cm thick. Fixed ball bearing guides. The lower drawer has a double ladder. Solid ball bearing guides (double bearings) for the drawers 4 drawers 3 pieces of cupboards with lockable doors. CAUTION! Version in black. Dimensions L-W-H 1380 x 610 x 180 mm Weight 139 kg Number of drawers 4 pieces Package size max. 1280 x 680 x 80 cm Approx. Onsite Dimension. (l x w x h): 1,280 x 680 x 800 mm, weight approx.: 140 kg
used
Article: Black rubber Compensator Manufacturer: Wanda Type: black with length limiter Condition: used, very good Model: DN 100 PN 10/16
new
range L-W-H: 1380 x 610 x 1800 mm weight: 139 kg : 4 St. : 1280 x 680 x 80 cm Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Bolts, hex bolts, flange nuts, hex nuts, collar nuts -Hex nuts: M8 bis M30 645 kg -Sizes/number: see photo parts list -Price: complete -Total weight: 645 kg
used
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M 20 700 kg -Sizes/number: M16 x 30 to M16 x 130, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 627 kg
used
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon head screws: M20, DIN 931 -Weight: 514 kg -Sizes/number: M20 x 45 to M20 x 100, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces = 125 pieces
used
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M24 approx. 600 kg -Sizes/number: M24 x 70 to M20 x 120, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 617 kg
used
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M20 700 kg -Sizes/number: M20 x 65 to M20 x 140, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 700 kg
used
Description: Tool trolley including removable top box. Ball-bearing drawers (double storage) Anti-slip mat in every compartment. 2 steel bars for locking the top box. All drawers can be opened 100%. Solid handles, 4 rolls of 70 mm, 2 keys. Number of drawers 8 pcs. Dead weight 27 kg Dimensions L-W-H 700 x 400 x 750 mm Approx. Onsite Dimension. (l x w x h): 700 x 400 x 750 mm, weight approx.: 27 kg
used
Metal cleaning plant make MAFAC Ernst Schwarz type P 100.50 DApparatus number 90056 804, year of construction 1990for cleaning production parts and toolsWorking space depth: 445/237 mmLength x width: 1000 x 500 mm:Capacity: 290 lExhaust air volume flow: 1000 m3 / hVolume flow pressure: approx. 4 l / min, 0.1 barCapacity: 200 kgPneumatic connection: 4 - 6 barElectric connection: 380 V, 50 HzDrive power: 0.9 kWWeight approx: 360 kgExternal dimensions L x W x H: 1300 x 1295 x 970 mmUse of chemical solvents with a flash point above 55 ° C(Stable in hazard class A III VbF) or lower explosion point VEP above 40 ° CAttention: This device is not explosion proofWith- Sheet steel interiorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if yo ...
used
Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
MRI, Siemens Magnetom TRIO ( A TIM SYSTEM ) - Year of construction 2007 - including HF cabin of the company Schwarz - Plant is under Siemens maintenance contract - still in clinical operation - very well maintained facility with many accessories
used
- Working width 1300 mm - Gesamtbreite ~ 1.590 mm - Rollenbahnhöhe 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 125 mm - Angetrieben nein ohne Antrieb - Length 1.500 mm - Colour schwarz, black - Voltage / HZ 400 / 50 - Location, in stock
used
Ersatzwalze für: TLX, Hymmen: yes, Gummiert Walze: yes, Gummierte Länge cm: 1400, shore Härte: ca.35, Stärke Gummierung ca. mm: 20, Stahkerndurchmesser ca. mm: 215, EPDM: schwarz,
used
Polyethylene Hose, Polyethylene Plastic Hose, Polyethylene Hose PAGUS 6x4x1 Diameter ( outside ): Ø 6 mm diameter ( inside ): Ø 4 mm wall thickness:: 1,, 0 mm total length: approx. 1400 m divided into single rolls, length: 25 m Material: polyethylene ( LD-PE black ) similar LANDEFELD PL 6X4 SCHWARZ Other quantities on request ! New ! Dimensions ( single roll ): 400 x 400 x 30 mm
used
Spare roller: ELX und TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20 Schwarz, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Gummiqualität : neu,
used
Control unit, load-dependent SAXONIA, SCHMIERGERÄTEWERK SCHWARZENBERG SGL 3 ( SGL3 ) Control voltage: 24 V DC Contact load: max. 25 V AC, 3 A Switching capacity: max. 50 W IP54 New Dimensions: 155 x 145 x 140 mm