schwabe used for sale

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 500 watts -Number: 6x lights available -Price: per piece -Dimensions: 245/170/ H620 mm -Weight: 4.8 kg/piece

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm -Weight: 98 kg

Linen store leaching for small quantities table table room made of stainless steel including draining plate and lid for lye tray suitable for metal size 600 x 400 mm, 530 x 650 mm, 580 x 780 mm Mass (WxDxH) in mm: 550 x 610 x 121 (with swivel lever: 550 x 710 x 121) ; ready to go!

A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible.

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

Various old woodworking machines are available. 1) Joos triple veneer press. 2) Frommia FS 60 post router, year of manufacture: 1985. 3) Schwabedissen planer. 4) Column drilling machine Ayen. On-site inspection is possible.

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm

Tenon cutting and slitting machine No further data known

A Schwabedissen DAZSa23 double-end profiler is available. Working width min./max.: 400mm/1250mm, chain track-cam distance: approx. 405mm, external dimensions at max. working width: approx. 3100mm/2800mm. The machine has 4 swivel motors on each side. On-site inspection is possible.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm -Weight: 42 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 165 x 10 mm -Dimensions: 500/250/H160 mm -Weight: 42 kg

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Decoiler, Reversible Decoiler GSW SCHWABE Type LHD 50/800 SondDouble Decoiler, Double DecoilerFabr. No. 5775 Year of construction approx. 1995Coil weight 50 kg per sideCoil width max. 130 mmCoil inner diameter 155 - 445 mmCoil outer diameter 850 mmFeed washers 850 mmThrust rings 850Middle reel shaft to reel foot 980 mm- Reel structure manually rotatable by 180 with locking steps- central spread via rotary lever adjustment- mechanical disc brake, adjustable brake shoes via knurled screwSpace requirement

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 35 mm -Tool: Ø 180 x 40-55 mm -Dimensions: 540/250/H160 mm -Weight: 46 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2880 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 220/380 volts -Receiving shaft: Ø 40 mm -Tool: electrically movable -Tool: Ø 180 x 28-48 mm -Dimensions: 830/400/H200 mm -Weight: 70 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Schwabe, double grinding wheel type EK4/4 -Grinding wheel: max. Ø 400 mm / Actual Ø 360 mm -Speed: 1400 rpm -Operating voltage: 380/660 volts -Motor power: 3 kW -Dimensions: 1320/930/H1450 mm -Weight: approx. 500 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 38 mm -Tool: Ø 200 x 30-60 mm -Dimensions: 640/150/H250 mm -Weight: 52 kg