134,664 used machines on RESALE, but how to find them? Machine Search
Fan Motor, Three-Phase Electric Motor VEM ALM 124/84-AX6 T 201 ( ALM124/84-AX6T201 ) TGL20675 0,0,0 025 / 0.08 kW 700 / 1400 rpm 380 V IP 43 Flange diameter(fan wheel): Ø 127 mm Flange diameter(motor): Ø 125 mm New ! Dimensions: 132 x 132 x 159 mm
Sweeper roller 1407974 974375 width: 700 mm diameter: Ø 300 mm bristle length: 80 mm Dimensions: 750 x 350 x 350 mm
Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footp ...
Tool cabinet, drawer cabinet with base PAGUS 555 x 735 x 700 (usable height) mm 4 drawers used, tested ! Dimensions (cabinet): 555 x 745 x 820 mm Dimensions: 555 x 745 x 1025 mm
Cooler, Heat Exchanger, Oil Cooler PAGUS New ! Dimensions: 600 x 700 x 200 mm
Various sizes, including L300 x W150cm. Auction-ID: A1-49846-476
Clamping Plate, Clamping Table, T-Slot Grid Plate PAGUS Working Area: 700 x 315 mm Working Height: 120 mm Groove Width: 14 / 25 mm an edge field broken ! Dimensions: 700 x 315 x 120 mm
Control cabinet, control cabinet BERNSTEIN CC-4000 694x596x280 ( CC-4000694x596x280 ) 1564100057 suitable for EL731 ! used, tested ! Dimensions: 700 x 600 x 290 mm
Universal clamping table, swivel, tilt and swivel table PAGUS clamping surface: 700 x 240 mm 5 grooves groove width: 12 / 20 mm can be rotated horizontally to the right and left 40 degrees can be tilted 30 degrees to the right and left 40 degrees Dimensions: 800 x 300 x 250 mm
Clamping plate, clamping table, machine table, T-slot plate LID Working surface: 700 x 250 mm for KF12 Plate thickness: 60 mm groove width: 12 / 21 mm used, tested ! Dimensions: 700 x 250 x 60 mm
Roller conveyor, conveyor belt (driven) All rollers driven. frame V2A roll width: 550 mm web width: 600 mm height: 960 mm length: 700 mm motor: 150 W 220 / 380 V dimensions: 700 x 710 x 960 mm still other parts available!
Directional Control Valve, 2/2 Way Angled Seat Valve with Pneumatic Actuator COCORDIA FLUIDTECHNIK 700/50/RR2 T-3 1300304 PN16 DN50 Rg5 New ! Dimensions: 290 x 290 x 160 mm
Combined precision rolling bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 70130 ( ARNB70130 ) INA No. ZARN 70130 TN ( ZARN70130TN ) Shaft diameter: Ø 70 mm Outer diameter: Ø 130 mm Bearing thickness: 82 mm New ! Dimensions (packaging): 150 x 150 x 110 mm
- Material: AISI 316 stainless steel - Standing on feet - Tanks, above, adapted to the cellar vault Dimensions : - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height at rear: 2500 mm - Total height at front: 3650 mm (including dome) - Ground clearance: 340 mm Equipment: - Rectangular door 320 x 420 mm - Total drain: flap valve DN 40, Friedrich no 2 - Residual drain: flap valve DN 40, Friedrich no. 2 - Taster - Level indicator - Dome DN 200
Used tyres, signs of wear/damage Auction-ID: A1-47390-172
approx. 113 pieces corlettes, width 1.10m / 2m / 2.70m - used - : Prices per piece from location (net): Type 1 – stackable: 79.-€ Type 1 – not stackable: 59.-€ Type 2 – stackable: 79.-€ Type 2 – not stackable: 59.-€ Type 3 – stackable: 65.-€ Type 3 – not stackable: 49.- Manufacturer: Cordes und Koch Type: unknown, different Year of manufacture: unknown, varies Type 1: "Large version" with the dimensions 2.70m x 1.15m (width x depth) 25 pieces in red – almost all stackable 10 pieces in blue – not stackable 2 pieces in green – not stackable Type 2: approx. 24 pieces are stackable "Medium variant" with the dimensions 2.00m x 1.15m (width x depth) 27 pieces in blue, 16 of them with grilles 12 pieces in green Type 3: at least 10 pieces are stackable "Small version" with the dimensions 1.10m x 1.15m (width x depth) ...
Coated; Various diameters and lengths Auction-ID: A1-49785-22
Fritsch automatic dough sheeter, type: Rollfix 700/650 EMA 1,6K x 1,6K ARE, 400V, 3 Ph, 50 Hz, 4.8 A, 2.2 kW, belt width: 650 mm, dimensions: 4500 mm x 1300 mm x 1400 mm.
LU-VE roof condensor, 6 fans, dimensions: 7000 mm x 2400 mm x 1300 mm.
Glass carrier 70kg double suction cup (2x) Auction-ID: A1-40898-144
Automatic wheel balancer, coolant filter, ruler and grinding and grinding wheel | automatical wheel balacer, coolant filter, blade and blade support grinding wheel, Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min / max to grinding: 2/150 mm, Regulating wheel width: 355 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 20/460 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x355 mm, Grinding wheel width: 355 mm, Maximum infeed grinding length: 355 mm, Coolant system motor power: 0.70 Kw., Motor power grinding wheelhead: 37 Kw., Total power: 45 Kw., Voltage: 220/380 Kw., Long: 1.165 mm, Width: 3.3 ...
maximum number of results exceeded
please refine your search
1.000 € 
