133,933 used machines on RESALE, but how to find them? Machine Search
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible.
saw blade diameter: 80 - 700 mm workpiece-spindlehead motor: 0,25 kW grinding wheel diameter: 125 mm turning speeds: 2850 U/min grinding range: -20 bis +20 Grad weight of the machine ca.: 12 Kg dimensions of the machine ca.: 700 x 400 x 300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600 RA2181 Technical data: Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width ...
sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KOPPENS MACHINEFABRIEK BV FRYER, TYPE BRN 3000/700 Technical features: Machine number: BRN 3000/700-994 Voltage / frequency: 380v, 3 ph, 50hz, 23.09 a, 9.7 kw Weight: 2940 kg Heated by thermal oil Prepared with fire extinguisher system S/s mesh belt, belt width: 700 mm Total dimensions: 6500mm x 1800mm x 2380mm
Sliding table saw and table milling machine Felder KF 700 S YOC 2024 Format carriage length 2500 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Scoring Ø 120 mm X-Roll Sliding Carriage Cutting width 850 mm with digital display Electromotive height adjustment Saw blade swivel 45° manual adjustment Saw blade Ø 315 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Cutting height max.110 mm Table milling machine motor 5.5 kW Spindle tiltable 0-45° Left/right rotation selectable Speed 3500 / 6500 / 8000 / 10 000 rpm Max tool diameter 230 mm Spindle diameter 30 mm Total weight approx. 700 kg
GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°Tool magazine 25 placesTool magazine 25 places (suita ...
VECCHIATO bending press mm. 2600X1300 mod. DE 120/70_800 – CE compliant - Opening mm. 1500 - 4 cylinders - Top-down movement - Protective nets - Year 2005 - Complete with manual and CE declaration
Key data: 2075 mm, 1000 mm, 700 mm
Pair of cast iron angle plates Width: 1000 mm Height: 2075 mm Depth: 700 mm Unit weight: 1 T
Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker
Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degree ...
2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019
Transnorm belt curve conveyor left GKF 90°-700-500-IR750 - NEW with STORAGE MARKS (RUST) RA2418 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 750 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,25 m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2017 Condition: unused, but has marks from storage, as can be seen in the photos Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2017 condition: neu mit Lagerspuren Nominal / inner radius in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Runni ...
Transnorm conveyor belt GF 14800-700-600 RA2196 Technical data: Conveyor length (NL): 14800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 or 0,42 Drive: SEW gear motor, R27 DT80N4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 14800 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor sp ...
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller ...
Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible.
Interroll Rising falling Incline belt conveyor with leading belt GF 7028 (6138+890)-690-580 RA2366 Technical data: Conveyor length (NL): 7028 mm ( 6138 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 7028 ( 6138 + 890 ) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine ty ...
Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg
Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Delta The scope of delivery includes: 01x Pallet rack trusses, used Material colour: yellow Box profile: 120 x 50 mm Truss type: HN120|30 Agraffe: 3 HK (hook) Weight / piece: approx. 22.50 kg Clear width: approx. 2,700 mm Max. load per pair of trusses 3,000 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Transnorm belt conveyor belt conveyor belt flap belt Smart Sort GF 1450-800-700 RA2037 Technical data: Conveyor length (NL): 1450 mm frame width (NB): 800 mm, 150 with motor Belt width (GuB): 700 mm headroom (BH)/transfer height : 800 mm Conveying speed (v m/s): 1.47 Drive: SEW gear motors, with brake at angle adjustment Electrical data: 50Hz V380-500, kW 0,37 drive belt and 2,2 drive angle height of sorting out bottom: 500 mm sorting height top 1200 mm Angle adjustment speed: 1s from min to max year of construction: 2009 Special feature / accessories: 4x proximity sensors for angle determination Optionally available: Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2009 condition: Ausstellungsstück Conveying length in mm: 1450 Nominal / outside width in mm: 800, 1150 Belt width ...
Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2250 Make: Lippert Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, s ...
Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2014 Roll division in mm: 65 scope of delivery: inklusive Frequenzumrichter, without supports KW: 1,5/S1 Electric data: 380-500 Bauhöhe in mm (BH): 250 Roll width in mm: 685 angle: 45° Links Conveying length in mm (NL): 1800, 2500, 3180 Frame width in mm (NB): 700 For individual, professional advice, simply contact us. Simp ...
Transnorm Rising falling Incline with arch belt conveyor GF 4500+700-600-500 RA2195 Technical data: Conveyor length (NL): 5300 mm ( 4600 mm incline + 700 mm arch ) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 5300 ( 4600 + 700 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...
Transnorm Rising falling Incline with arch belt conveyor GF 2200+1300-700-600 RA2189 Technical data: Conveyor length (NL): 3500 mm ( 2200 mm incline + 1300 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3500 ( 2200 + 1300 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: ...
Transnorm Rising falling Incline with arch belt conveyor GF 2200+900-700-600 RA2190 Technical data: Conveyor length (NL): 3100 mm ( 2200 mm incline + 900 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3100 ( 2200 + 900 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW ...
Transnorm belt conveyor GF 4900-700-600 RA2185 Technical data: Conveyor length (NL): 4900 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DRE90M4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2185 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4900 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Ampere: ...
Transnorm conveyor belt GF 3800-700-600 RA2182 Technical data: Conveyor length (NL): 3800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3800 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s ...
Transnorm accumulating roller conveyor with ejector 3820-700-645 RA2279 Make: Transnorm Running direction: both directions Roller width (RB): 645 mm Nominal/outer width (NB): 700 mm Length: 3820 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, WA20/T DR63L4/TH and 24 V drum motor Electrical data: V 380, kW 0.25/S1 Frame height: 120 mm A total of 6 modules available with 2 dischargers each. price per element There is a storage space between each discharger as a buffer Conveying speed: 0.33 m/s Optionally available: Supports Side guides on one and both sides Frequency converter for stepless speed control Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 3820 Nominal / outside width in mm: 700 Roll width ...
Height=0.4 m, Overall length= 0.35 m, Overall width= 0.4 m, Net weight= 27 kg,
Height=1.26 m, Overall length= 0.55 m, Overall width= 0.75 m, Net weight= 230 kg,
Height=1.15 m, Overall length= 0.85 m, Overall width= 0.7 m, Net weight= 83 kg,
WE sharp 7000, sharpening station for slicer knives, demo machine from exhibition
Manufacturer: LINEMATIC Model: LM34/705 Year of Manufacture: 2004 Power: 14 kW Voltage: 400 V, 20 A, 50 Hz Phase: 3-phase + Neutral + Protective Earth CE certified Find more here - .ucymachines/ Contact us at - sales@ucymachines
Steam capacity max.: 22 t/h Permissible operating overpressure: 91 bar HD overpressure: 83 bar HD - Temperature: 510 °! C Exhaust gas temperature: 160 °C Water capacity: 15.6 m³
A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.
Maho 700 C, built in 1983 Travel X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle holder: ISO 40 Speed: 3150 rpm Spindle stroke: 100mm Weight: approx. 3500kg Control: Philips CNC 432
CNC machining center from Urban Control: Heidenhain Track Control iTNC 530 4-axis Travel x/y/z – axis 7200 /450 /590 mm Working range x/y/z axis 7000 / 400 /350 mm Weight 14 t Equipment: Robust basic structure as a welded frame construction Ball rail guide on all axes Milling spindle unit: 100-12000 rpm, tool holder SK 40 Drives: X-axis 50 m/min by rack and pinion drive Y/Z axis 25m/min by ball screw B-axis 9000°/min Control panel swivels Automatic central lubrication Moving tool changer for 12 tool holders SK40 Cooling emulsion plant, machine people, security fence Electronic handwheel integrated into the control panel Chip drawers, laser scanners, minimum quantity lubrication Technical data see pictures.
Order- No.: 153-03 // Ser. No.: 1936 Equipment / Additional information: No. of ups: 3 Max. sheet size, width x length (cm) 1 up / 76 x 30,5 2 ups / 33.5 x 30,5 3 ups / 23.5 x 30,5 Min. sheet size, width x length (cm): 11 x 9.5 with small format equipment: 9 x 6.5 Max. pile height (mm): 150 Min. pile height (mm): 20 Max. speed (m/min): 200 Max. output (piles /h): 1,800 Banderol width (mm): 5 Pressing force (N): 35,000 Infeed height (cm): 40–105
DMG MORI NLX2500/700 with tool drive and C-axis Universal lathe with 3-axis Turning length 700 mm Main spindle with integrated motor spindle ISM (rod diameter in mm) Hydr. Clamping devices, clamping cylinders, chucks C-axis with hydr. Spindle brake 10-speed BMT star revolver 10-speed tool drive NC tailstock CELOS with Mitsubishi control M730UM
x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm table-size: 700 x 280 mm control: Heidenhain TNC 145 tool adaptor: SK40 turning speed range: 40- 2.000 U/min rapid speed: 1,5 m/min feed speeds: 1500 mm/min power requirement: 2.2 kW quill stroke: 63 mm weight: 1,3 t total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions: 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Granite measuring plate 760 x 1190 x 700 mm Dimensions: H x W x D 760 x 1190 x 700 mm Material thickness: 800 mm More items - new and used - can be found in our shop! International shipping costs on request!
Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) angle: 90° nominal voltage: 400 Conveying length in mm: 700 Nominal / outside width in mm: 760 Roll width in mm: 690 Roll division in mm: 75 Driven: YES Engine type: SEW Getriebemotor scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. S ...
working width: 1150 mm working area:: 5700 m²/Std. total power requirement: 3,0 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,6 x 1,2 x 1,6 m Sweeper with charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Control: Mitsubishi M-720BM(MAPPS 3) Upper turret Tool holder: 12 Main spindle Max. spindle speed rpm: 4000 Spindle drive power kW: 18.5/15 Spindle bore mm: 91 Manufacturer: KITAGAWA Sub-spindle Spindle motor: 6000 Spindle drive power kW: 11/7.5 Spindle bore mm: 43 Manufacturer: KITAGAWA Equipment Conveyor Signal lamp Tool measuring arm High Pressure Pump Workspace light Common Variables for Custom Macros (100) Year of construction: 2011
Transnorm curved belt conveyor right bend 45°-800-700 IR1600 RA2435 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 1600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 1600 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adju ...
x-travel: 7000 mm y-travel: 2000 mm z-travel: 1250 mm control: Heidenhain iTNC 530 plate size: 7000 x 1500 mm tool change unit: 60 Pos turning speeds: 35 - 4500 U/min spindle motor: 37 kW rapid traverse: 20 / 10 m/min total power requirement: - kW weight of the machine ca.: - t required space: - m equipped with: - Heidenhain iTNC 530 CNC control - Tool changer for 60 tools (ISO 50) - autom. Milling head (0,001 °) - Spindle cooling 15bar with paper band filter - Chip conveyor - Renishaw RMP 60 - Extra Miling Head (Spare Part) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 6500 kN, 105 mm
Location is : Latino America !
maximum number of results exceeded
please refine your search
