sc used for sale

Buffing unit - 1 motor

10000 pcs Plastic Crates SSI Shepherd 60x40x42cm Used goods, very good condition see pictures (holes in the bottom). Load capacity per box 20 kg Outer length: 60 cm / Inner length: 55.3 cm Outer width: 40 cm / Inner width: 35.3 cm Exterior height: 42 cm / Interior height: 41.6 cm Various black Material: Polypropylene (PP) Dimensionally stable and robust Stackable on top of each other Negotiation price: € 9.50 net per piece from stock P10276 20 pieces per pallet, larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. Constantly over 5000 linear metres of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all ...

Type Cutters Height 1900 Width 700 mm Length 1300 mm Weight 270 kg Voltage Electrical: 400V 50Hz 3N Installed Power 11 kw Main material Stainlees Steel Cutter Type Emulsifier Knife shaft revolutions 2900 rpm

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KRP50/832107/6286 Year of construction: 1988 Power: 3.8 kW LWH: 440 x 270 x 400 mm

Air consumption: 48 m³/h Motor output: 5,5 kW Overall size: 620 x 980 x 1480 mm Receiver: 215 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting machine for small biscuits Cutting - Jack with inlet shaft Table unit made of stainless steel Performance up to approx. 2000 rolls Cutting height adjustable Pastries max. 160 x 80 mm, WxH DGUV V3 tested Connection 230V, plug-in Dimensions (WxDxH) in mm: 800 x 440 x 470 New device with 12 months warranty optional: - Driving table come to our bakery machinery warehouse!

Schneider NGEA-2410 T40/E

Shaft side diamonds

For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

incl. spare bulbs

Scania DC 12, complete engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - with exhaust manifold - with thermostat housing - with oil filler nozzles - Turbocharger as needed Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

Panel gluing line Drawing number: PVP-00-00-00-1165 ELECTRO-OIL-HYDRAULIC DESIGN with electric heating plates Clamping size: 3,000 x 1,300 mm Maximum wood thickness: 70 mm Minimum wood thickness: 4 mm Fed with: 10 pcs hydraulic cylinders ø35 x 95 mm stroke (Press force max. at 200 bar = 1,900 daN) with fold-up thrust pieces for narrow Workpieces 3 hydraulic cylinders ø60 x 250 mm stroke for operating the upper heating plate (Press force max. at 160 bar = 5,000 daN) 1 pc. pressure control valve for the upper heating plate 1 pc. pressure control valve for the press cylinders 1 infinitely adjustable timer for automatic opening of both the heating plate and also the hydraulic cylinder Technical data of the heating plates: ELKOM - Electric heating plate made of aluminium in sandwich structure Maximum usable temperature: 120°C Surface hard anodized Power consumption: ...

Scania DC 12, fuselage engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - without exhaust manifold - without thermostat housing - without oil filler nozzles Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KSP50/6399/772097 Year of construction: 1990 Power: 2.05 kW very good condition LWH: 460 x 240 x 400 mm

Wide belt sander SCM Sandya 40 M1 year of construction 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table       Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disc brake Rubber coated pressure rollers Automatic carpet centring Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Brand new wooden powder trays for mogul plants, quality, long-life cycle, material, precision analog to Treiber, stackable, appropriate for all mogul lines, tested for NID, W&D, MAKAT, BOSCH, partially already certified by the manufacturers of the line send your price inquiries to company SCHOKOMA GMBH indicating quantity of trays, bottom material, dimensions inside and outside, delivery possible

Washing bath with conveyor, bath conveyor, swimming / sinking system, swimming / sink container with discharge belt, belt washer, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Bathroom approx. 3000 x 1000 x 1200 mm stainless steel Discharge belt with worm gear motor with control SEW / BONFIGNIOLIE DFT90L4/MM1S/BW1 MOVIMOT MM15C-503-00 1.5 kW 380 V Transverse band with gear motor MINOR ENGINE Y3-71B4B14F1 0.37 kW 380 V Total dimensions: approx. 4300 x 2300 x 2500 mm The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Wet acceptance system, swimming / sinking system, swimming / sink container with discharge belt, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Type NA 650 Filling height approx. 2 m Funnel approx. 2.4 x 1.9 m Depth to the band approx. 1.2 m Bandwidth approx. 600 mm Drive via infinitely variable gear motor Total dimensions: approx. 4 x 2.1 x 3.1 m The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Acceptance belt, acceptance bunker, acceptance funnel, bulk funnel used Manufacturer: SCHNEIDER Fördertechnik GmbH Year of construction: 1996 VA Stainless Steel Bandwidth approx. 1500 mm Belt speed approx. 1 m/min However, we can change the speed with other sprockets or other gear motors. Drive with 2 gear motors Sew R93 D1100LS-8 0.75 kW 3 rpm Receptament ca. 8 x 1.5 x 1.4 m Total dimensions: approx. 9 x 2.2 x 2.5 m The acceptance bunker was used in the food industry in a plant for the further processing of vegetables, cabbage and fruit. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Swimming / sinking system, swimming / sink container with discharge belt, washing bath, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: NUNBERGER conveyor systems Type KB 600 Filling height approx. 2 m Bathroom approx. 4 x 2.4 x 1.6 m Chain tape for discharge of sinking materials Bandwidth approx. 600 mm Belt drive with gear motor 1.5 kW (dismantled due to transport height) Total dimensions: approx. 5.5 x 2.4 x 3.1 m The plant was used in fruit and vegetable production. It is also possible to use plastic to clean. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Diatomaceous earth filter capacity 45 liters, operating pressure 2.5 bar. Suitable for filtration of cutting oils of automatic lathes.

Modular ice flake production plant with a maximum capacity of 2500 kg/24 h With semi-hermetic compressor With remote air-cooled condenser Stainless steel screw and freezing cylinder (evaporator) Electromechanical control panel Special reinforced alloy icebreaker, which allows for higher pressing force, resulting in a drier quality ice (85% dryness) Long life stainless steel bearings Gearbox current protection, safety clutch between gearbox and pulley Low water level sensor Ice level thermostat Removable stainless steel side panels for easy servicing PS plastic cover Ice chute with extension Reduced height CFC free R-404A refrigerant

3500 SSI Schaefer EURO-Dimension 643-66 Features • Material: High quality polypropylene (PP) • Color: Blue / Gray • Volume: 60 litres • External dimensions: 600 × 400 × 320 mm • Internal dimensions: 570 × 370 × 305 mm •Ultimate load: o Static: 40 kg o Load (stacked): 180 kg • Temperature resistance: -30 °C to +60 °C • Weight: 2.8 kg • Foldable: Yes (reduces volume by 81%) • Floor & Walls: Closed • Handle: Handle-through handle for easy transport Price € 14,- net excl. VAT • Quantity discount: € 11 per piece when buying a pallet (100 pcs.) • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment The box in EURO size 643-66 without lid (60 l) from Schäfer Shop is a robust, stackable plastic container, ideal for storage and transport in indust ...

Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment

GreenLine SCH 230 - Mower container with flail mower GM 130. Universal device for mowing/mulching and for simultaneous reception of the mowing material. Heavy, robust design: mulcher with leaf mallet, mowing width approx. 130 cm, adjustable bottom roller, container approx. 3.5 m³, emptying, additional tailgate in the rear for transport of z.B. straw bales or tools. Tyres 10.0x75-15.3", 10 PLY. Ab. GG 2800 kg. Power requirement from 22kw/30 HP (manufacturer's specification), 1 hydraulic connection ew (tipper connection) required! Machine with age-related defects, but operational. Equipped with inerole brake, ABE (General operating permit for public road traffic), transmission with freewheel. 1 hydraulic connection ew required. Design-identical machine also available with 150 cm mower as well as one with 150 cm and 5 m³ container. Details and prices on request.

to turn the cans by 180° for example before and after the pasteurizer/can warmer/can coding suitable for all can types: Standard, Sleek, Slim

Siemens Simovert, P SC6025-1AA01, Type D165 D165/25 M5REQ Not checked for functionality. Sold only to traders!

Book Back Rounding Machine Machine No.: 520

tool clamping area: 300x55x85 mm weight: 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ---- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schneider Transfo stel 320

faceplate diameter: 2500 mm swing diameter: 3200 mm turning height: 3100 mm Control: R&D type: MTC 2x-2 workpiece weight: 20000 kg slide adjustment: 1600 mm side head - cross travel: 1000 mm Tool changer: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.