sc 43 used for sale

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 900 mm stroke: 300 mm table surface area: 850x900 mm ram surface: 800x880 mm stroke: 300 mm table height: 1050 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schutzgaserzeuger Ofenanlagen zum Homogenisieren von Aluminium Kammerofen zum Homogenisieren von Barren und Bolzen Aluminium Homogenisierungsöfen Kontinuierliche Homogenisierungsöfen Stoßofen, Einweichen, Tief- und Rollenherdofen für Aluminiumbarren und -knüppel konzipiert Nichteisen Schmelzmetall Ofenanlagen Schmelz- und Warmhaltegeräte Lösungsglüh-Ofensysteme Die wärmezubehandelnden Barren oder Bolzen werden unter Zuhilfenahme von Distanzstücken zu Chargen zusammengestellt und mittels Chargiersystem in den Ofen eingebracht. Die Erwärmung erfolgt durch intensive Heißluft- oder Rauchgasumwälzung mittels Ventilatoren, wodurch eine schnelle und gleichmäßige Erwärmung erzielt wird. Nach Ablauf der Homogenisierungszeit wird die Charge in eine Luftkühlkammer überführt, in der sie mit kalter Luft rasch abgekühlt wird. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofe ...

Emulsion pump, coolant pump, cooling water pump SCHMALENBERGER Z 40-13 immersion depth: 55 cm Q= 12m3/h H= 12 m motor: 1.1 kW IP54 Dimensions: 84 x 30 x 34 cm

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfe ...

AgileX's SCOUT 2.0 is a robust and versatile expandable 4WD UGV platform for research, development and integration of autonomous robotic systems. Four individually driven wheels, a double wishbone suspension and a payload of up to 50 kg provide a stable basis for LiDAR systems, cameras, industrial computers, manipulators and application-specific sensors. The platform can rotate on the spot, handle slopes of up to 30 degrees and overcome obstacles of about 100 mm in height. CAN interface, power connections, T-slot profiles and an open SDK enable the flexible connection of your own control, sensor and computer systems. The SCOUT 2.0 is CE certified. Typical applications: - Research and development of autonomous systems - Sensor carriers for LiDAR, cameras, GNSS and IMU - Mobile manipulation (combination with robotic arm) - Inspection and outdoor operations Technical data: - Drive: 4WD, ...

The SCOUT MINI is a compact and dynamic 4WD platform for research, development and mobile robotics. The low dead weight and compact dimensions facilitate transport, test setup and use in laboratories, halls and suitable outdoor areas. Four independently driven wheels and swing arm suspension ensure high manoeuvrability and good ground contact. Depending on the configuration, the platform is available with standard wheels for differential travel or with Mecanum wheels for omnidirectional movement. CAN 2.0B, open SDK and ROS packages enable the integration of your own control, navigation and sensor systems. Typical applications: - Research and development - Robotics training on real hardware - SLAM, navigation and sensor fusion - Use in laboratories, halls and suitable outdoor areas Technical data: - Drive: 4WD, four independently driven wheels - Suspension: swing arm - Wheel variants: ...

SCHLEICHER WV-PL 160/800 coil feeding line was built in 1987 in Germany by H. Schleicher GmbH & Co. Maschinenfabrik. The line is used for the automatic feeding of material from a coil to presses and other machines used in metal forming. The automation of this process stage improves mass production, increases its efficiency and reduces the need for manual work. The SCHLEICHER WV-PL 160/800 coil feed line consists of a roller feeder, a straightening machine and a sheet metal decoiler. It is designed for coils with a maximum width of 800 mm and a weight of 200 kg. A 4 mm thick material strip is decoiled and straightened, then fed directly into the machine’s working area. The precisely adjustable feed rate ensures uniform strip feeding, which translates into process repeatability and stable operation of the entire line. All this makes the SCHLEICHER press feed line an excellent choice f ...

Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible.

Elements: Product transport/transfer area, robot stations, packaging material feed, forming/transfer area, multi-lane magazine/handling area, number of suction stations: 16, with CE marking. An on-site inspection is possible.

The scope of delivery includes: 01x Reach truck, defective Manufacturer: STILL Model name: FM-12 I Total weight: 2,150 kg Nominal load capacity: 1,200 kg Nominal drive power: 6.0 kW Maximum battery weight: 788 kg Battery Voltage: 48V Year of manufacture: 03/2007 Serial Number: 611878000365 Maximum lifting height: approx. 5,870 mm Operating hours: 0,0h Total width: tines (outside) approx. 800 mm Tine length: approx. 800 mm Battery age: 2012 Extension stretcher at depth: up to 630 mm Total height: approx. 2,460 mm Overall width: approx. 1,250 mm Total depth: approx. 1,700 mm Total depth retracted with tines: approx. 1,900 mm Total depth extended with tines: approx. 2,520 mm Battery charger, used Manufacturer: Richter Forklift Model name: SE48V80A Total width: approx. 500 mm Total depth: approx. 400 mm Total height: approx. 810 mm Note: Reach truck only serves as a spare part dispenser. ...

Suitable for 0.7l-VdF bottles, capacity: 3000bottles/h, running direction: right to left, the packing head is equipped with 12 long-life packing tulips, the machine was used in low-volume operation, is very well maintained and has low operating hours, an on-site inspection is possible.

Belt sander manufactured in 2022. This SCM DMC SY TC 1350 features a working width of 1,350 mm and includes three sanding units: longitudinal, transverse, and longitudinal brush. If you are looking to get high-quality sanding capabilities, consider the SCM DMC SY TC 1350 machine we have for sale. Contact us for further details.