sc 43 used for sale

9482023 Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler features a durable, electronically controlled, water-cooled moving grate, designed to burn a wide range of fuels from wood pellets to wood chips and waste wood. Installed in 2012, the plant operated on wood pellets until December 2022. It is a complete system in good condition, housed in a concrete-element building, with two large pellet silos and a hot water accumulator tank for heat load balancing. These auxiliary components are optionally available to interested buyers. The boiler is equipped with load-controlled primary and secondary combustion air fans, as well as a speed-controlled exhaust gas fan, ensuring high combustion efficiency and low electrical power consumption. The two-stage combustion design minimizes NOx emissions. Its robust triple-layered ceramic and steel combustion ...

Manufacturer: Scansonic Type: AL01 Condition: refurbished, since then unused and professionally stored in the manufacturer's suitcase Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm to 4 kW Illustrations: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber plug: Trumpf B or Type D (LLK Auto) Laser: CW laser up to 4 kW Working range height (Z): ± 5 mm Robot adaptation: any Repaired/replaced: - Lens - Compression spring - Protective spring - Cover - Beam aperture - Shaft spring - Fiber coupling firing In addition, the device was cleaned, adjusted and force-normalized.

We sell 150 x Juniper SCBE-MX-S, 100 x various Juniper systems In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions ...

Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg

SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.

Plug 1 – 1250 kVA Transformer Manufacturer: France Transfo / Schneider Electric Year: 2002 Power: 1250 kVA HV voltage: 5775/5500/5225 V LV voltage: 410 V LV Current: 1760.2 A Cooling: ONAN Insulation: OIL Winding: ALU Total weight: 2665 kg Condition: Good condition sold as is, with no warranty. Plug 2 – 1600 kVA Transformer Manufacturer: Pauwels France Year: 2004 Power: 1600 kVA HV voltage: 5750/5500/5225 V LV voltage : 2253.07 V LV Current: 167.96 A Cooling: ONAN Insulation: OIL Winding: Total mass: 3200 kg Condition: Good condition, sold as is, no warranty. Plug 3 – 1250 kVA Transformer Manufacturer: France Transfo / Schneider Electric Year: 2004 Power: 1250 kVA HV voltage: 5775/5637/5500/5362/5225 V LV voltage: 410 V LV Current: 1760.2 A Cooling: ONAN Insulation: OIL Winding: ALU Tota ...

As good as new measuring frame with X-ray radiation for basis weight measurement on web fabrics up to a maximum width of 1000 mm. YOC 2014, approx. 2 ́100 operating hours, fully functional X-Ray-Gauge in good condition, for meassuring coatings or material weights up to max. 1000 mm widht. YOC 2014, about 2 ́100 running hours, fully functionable

SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Truss Type: TRV1-290-124-30 CE Box file: 120 x 40 mm Agraffe: 5 HK (hooks) Clear width: 2,900 mm Max. load per pair of trusses 3,100 kg, with the same weight. Distributed load 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Machine number: 20932 Operating voltage: 3 x 400 VAC Frequency: 50/60 Hz. Rated Current: 46A 63A Control voltage: 200-240 VAC Power: 28 kW Control: Tool holder: Grinding head: Grinding spindle: Spindle can be swivelled by motor Drive power: 7.5 kW Speed: 0 – 9000 rpm Lens mount: Disc diameter: Max. number of slices: Travel: X: 380 mm Y: 280 mm Z: 280 mm Feed: X and Y axis: 20000 mm/min Z-axis: 10000 mm/min Swivel axes: Designation: C-axis Swivel angle: 340° Feed: max. 66°/s Axis: A-axis: Rotation endless Feed: max. 167°/s Incl. oil cooling and cooling system from the manufacturer ARO Incl. various matching machine accessories such as tool holders, coolant lines and other clamping devices

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Size: 830 x 660 mm

cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 cloth press 1,0 m cloth width capacity: up to max. 4 t with top fruit

Key data: 520 , 7

Holzkraft SCM thickness planer S 52ES Product name: Thickness planer Model: S 52ES Type: SP-03 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: KK00019806 Year of construction: 2021 Condition: as good as new technical details: - Work table size: 850 x 520 mm - Useful width: 520 mm - max. chip removal per operation: 5 mm - Knife shaft diameter: 120 mm - Number of knives: 30x3x520 / 4 pieces - Knife shaft speed: 5,200 rpm - Holding time knife shaft: less than 10 sec - Feed speed during thickness planing: 5 - 8 - 12 - 18 m/min - Diameter of the extraction hood (plastic): 120 mm - required speed of the extraction air: dry chips = 20 m/sec, wet chips = 28 m/sec - Consumption of extraction air [diameter 120 mm]: 814 m³/h dry chips, 1,140 m³/h wet chips workpiece height: 240 mm workpiece width: 520 mm - min. workpiece height: 3.0 mm - min. workpiece length:  ...

New airend BOGE BA 30 as a replacement for Termomeccanoca SCA10D (TM SCA 10 D) The installation dimensions are the same. BOGE Id.Nr.: 201021766P ( incl. gasket DN 60x D110x 2 and O-Ring-90x3-N-FKM (Viton) 75)

New airend BOGE BA 15 as a replacement for Termomeccanoca SCA8D-R (TM SCA 8 D-R) The installation dimensions are the same. BOGE Id.Nr.: 201021166P ( incl. gasket 60 x 60 x 2 and O-Ring-76x3-N-FKM (Viton) 75)

Multi-storey shelving system As good as new 4 staircases Year of construction 2016 Modular and compatible Combination of shelving system and steel construction Efficient and economical use of space on 2 floors 2-storey construction More ergonomic usability during order picking Benefit from all the advantages of the SCHULTE plug-in system when multiplying your storage space, such as the compatibility of the 25 mm grid perforation and the variety of accessories. The coordination between the perforation of the MULTIplus T-profiles in a 25 mm increment and the edge height of 25 mm of the shelves enables optimal adaptation to the goods to be stored. Manufacturer: Schulte Lagertechnik Shelving system: Plug-in system Shelf type: 2-storey shelving system Number of stage levels: 1 Floor space: 13.18 m x 16.7 m Square meters: per floor 220.11 m² Height 1 floor: 218 ...

Pallets are checked for damage

Schärf Coffee Grinder Type: Stark Xmill with steps (fine-coarse) Grinder Stainless steel cladding 230V 50Hz Height: 82cm Width: 22cm Depth: 36cm

Machine is in good condition.

11 KW

Table saw scheppach ts 4000

; Gross weight [kg]: 13000; Engine: DC16 320A 02/63; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 2500

; Gross weight [kg]: 13000; Engine: DC13 320A 02/62; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super silent Canopy; Water Tank Volume [l]: 2500

; Gross weight [kg]: 5500; Engine: DC 09 320 02/61; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 1200

faceplate diameter: 3000 mm swing diameter: 3500 mm turning height: 3200 mm Control: Fanuc type: Series 320i Model A slide adjustment: 1750 mm ram head dimension: 300x300 mm x-axis: 2700 mm Table load: 30000 kg main drive motor: 100 kW Tool changer: 16 chip conveyor: total power requirement: kW weight of the machine ca.: 89 t dimensions of the machine ca.: 8,5x6x8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Bale size: 770x600x500 mm Bale weight: - Power supply: 400 V/4 kW Year of construction: 1997 Productivity: - Price: on request

Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

FLOW​ METER SV5204 IFM

Stock# U2467-1 Used circumferential piston/lobe pump by Alfa Laval model SCPP2/130. Contact parts designed in stainless steel. Pump has horizontal location of inlet and outlet, each with diameter 76 mm / 3". Pump has output up to 0.946 l per rotation of rotors. Maximal output up to 34 m3/h, at maximal rotation of pistons/lobes up to 600 rpm. Working pressure up to 14 bar, temperature range from -40 up to 150 C. Currently pump is equipped with drive by SEW-Eurodrive, with el motor 1.5 kW, 1430 rpm, 230/400 V, 50 Hz. Working rotation up to 151 rpm. On current drive pump can reach output up to 8,57 m3/h. Pump is mounted on stainless steel plate.

a well-preserved CNC portal milling machine Dörries Scharmann] type FZ 25, built in 1994, table 6000 x 2500 mm, travel distances X/Y/Z 6000/2500/2000 mm, portal passage 3000 mm, table load approx. 40 tons, with automatic milling head change. CNC control Heidenhain TNC426, dimensions approx. 18 x 8 x 7 m, weight approx. 174 to.

used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW

Spine heating plate Schmedt PräPara; good condition; cleaned and tested; Max. Book height 640mm; Max. Block thickness 110mm; Adjustable inclination. Book cover heating plate Schmedt PräPara; good condition; cleaned and chekced; max.book hight 640mm; max.block thikness 110mm; adjustable in tilt.

Grain cleaning Schmidt Seeger TAS 206 Capacity 200 t/h Wheat, spare sieves etc.

Airport Slopes Runway Runway Winter Service - Spreaders Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" litter body, solids and brine tanks. Contents: gritting agent 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in steps of 1 m Propulsion: Hatz 3M41 diesel engine Operation control by remote control with additional motor remote start/stop and motor monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, NATO towing eye 76 mm! Built in 2002. Hardly used, hardly any corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service technology in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscap ...

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

Key data: 4200 mm, 115 mm

Panel Saw with Lift Table Loading Scheer Type: PA 7004 Year of Make: 1999 CE with automatic lift table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, Linux operating system with PA software S5 Cutting length 4200 mm Travel of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade protrusion 135 mm Panel Saw Size FM22 Main saw blade diameter maximum 450 mm Scoring saw blade diameter maximum 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher 30 m/min in the flow, 70 m/min in the return. Remaining section device SP5004 Saw motor 11 kW, scoring 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lift table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front Air Cushion Support Tabl ...

Originates from a European pharmaceutical leader in contract development and manufacturing (CDMO). Includes: 304 s/s platforms and stairs The MGW-1 used process mixer is designed for preparing alcohol, alcohol-based or water-based solutions, storing them, and maintaining the temperature of the medium at the level necessary for further processing. Working Description: Milfor is currently a part of Schwarte Processing – a brand of the HF FoodTech Group Web: abc.schwarte-processing.com The device is made to ATEX standard and can operate zone classified as explosion-hazard zone standard Z1 and Z2. The mixer is designed as a vertical cylindrical tank with a working capacity of 1000L and an internal diameter of 1100mm, ellipsoidal bottom. The tank is a welded, double-shell structure made of 316L stainless steel (components in co ...

The Schiatti FPS 20 RBS is an advanced straight grinder for glass processing, designed for finishing flat edges and bevels with high precision. Here are the key specifications and features that distinguish this machine: ⚙️Technical Specifications Glass thickness range : from 3 to 20 mm Minimum glass size : 150 × 150 mm Maximum load : 1000 kg Working height : 765 mm Total power : 8.1 kW Water tank capacity : 195 liters Air consumption : 8 Nl/min Front speed : adjustable from 0.5 to 5 m/min Total weight : 1823 kg Features Sharpening of flat edges and facets up to 45° Polishing with cerium oxide (liquid or synthetic) Automatic thickness adjustment Independent adjustment of diamond and polishing wheels Double speed motors for polishing wheels PLC control with input and display of working parameters Closed water cooling system Rubber pads on conveyor chain with  ...

The cross-welding stamp of the packaging machine is closed by a servo motor and is infinitely variable. The width of the infeed belt is infinitely adjustable via a hand crank, which allows perfect, simple and uncomplicated adjustment of the product width. The parameters are entered via a modern, easy-to-use touch screen. The flow length is controlled photoelectrically, so that different package lengths can be packed one after the other and one after the other. The machine is technically designed for very tight, perfect shrink-wrapping of the products, so that optimal packaging results are achieved in any case. The machine works with an automatic film feeder, it is possible to work with different transport speeds. Longitudinal and transverse welding are permanently heated and easy to control via the touch screen. Product Dimensions: Length: min. 50 mm, max. endless Width: min.  ...

Scheuch injector for Impulse filters, 160-D-1.10038-V0, TF-VT-INJ-00, Scheuch, new -50% Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: New The part comes from a spare parts warehouse at a manufacturing plant, has always been stored in a dry place, is new and fully functional. Scheuch injector for Impulse filters, 160-D-1.10038-V0, TF-VT-INJ-00, new, Venturi nozzle for bag filters Pipe inner diameter 87 mm, Trumpet top outer diameter 125 mm, Flange outer diameter 185 mm, Height 212 mm 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect  ...