sbo used for sale

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO250-3,5E1/112U-210AK Content: 3,5 l operating pressure: 210 bar Pmax: 310 bar operating temperature: -10 °C - 80 °C connection thread: G3/4 material ( storage body ): steel material ( storage bladder ): BR20 (acrylonitrile butadiene) spare part for machining center HECKERT CWK400 D !, among others used, tested ! Dimensions: 340 x 190 x 215 mm

Diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO200-1E1/112U-200AB Content: 1,,0 l Pmax.: 200 bar T: -10 - 80°C Hydraulic connection: Female thread: G1/2 ( inch ) / External thread: M33 x 1.5 Width across flats: 41 mm Filling connection: Internal thread: Male thread: M28 x 1.5 New ! Dimensions: 205 x 137 x 137 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO140-1,,4E1/112U-140FT080 Capacity: 1.4 l Pmax.: 140 bar T: -10 - 80°C Hydraulic connection: Male thread: M18 x 1.5 width across flats: 30 mm Filling connection: Female thread: Male thread: M28 x 1,5 New ! Dimensions: 210 x 145 x 145 mm

Membrane accumulator, bladder accumulator, pressure accumulator HYDAC SBO250-3,5E1/112U-210AB Capacity: 3.5 l Pmax.: 210 bar T: -10 - 80°C Hydraulic connection: Female thread: G3/4 ( inches ) / External thread: M45 x 1.5 Width across flats: 46 mm Filling connection: Internal thread: External thread: M28 x 1.5 New ! Dimensions: 345 x 170 x 170 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO330-3,5E1/112UA1A9A11S1-330AK180 Capacity: 3.5 l Pmax.: 330 bar T: -10 - 80°C Hydraulic connection: Female thread: G3/4 ( inch ) width across flats: 46 mm Filling connection: Female thread: Male thread: M28 x 1.5 New Dimensions: 330 x 173 x 173 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO250-0,075E1/112U-250FR080 Capacity: 0.075 l Pmax.: 250 bar T: -10 - 80°C Hydraulic connection: Male thread: 3/8 ( inch ) Width across flats: 30 mm Filling connection: Male thread: M28 x 1.5 New ! Dimensions: 165 x 65 x 65 mm

Membrane accumulators, bladder accumulators, pressure accumulators HYDAC SBO100-2E1/112U-100AK Contents: 2,0 l Pmax.: 100 bar D: -10 - 80°C Hydraulic connection: Female thread: 3/4 ( inch ) Wrench size: 46 mm Filling connection: Male thread: M28 x 1.5 New ! Dimensions: 220 x 160 x 160 mm

Used blow moulding machine Sidel SBO 8 series 2 up to 12000 bph Introduction of the blow moulding machine Sidel SBO 8 In the bottling field the choice of suitable machinery is crucial The used Sidel SBO 8 blow molding machine series 2 stands out for its production capacity and reliability Designed in 2004 this 2 series represents a cost effective option for companies looking for efficiency and quality in the bottling sector Technical details The Sidel SBO 8 series 2 is a bottle blowing machine that has accumulated 19857 working hours This data reflects the experience and resistance of the machinery over the years It is important to note that the machine is sold without molds This offers considerable flexibility in terms of customization and adaptability to specific production needs Maintenance and Reliability of the blow moulding machine Sidel SBO 8 The last maintenance intervention was  ...

Sidel SBO 10 Used Blow Molding Machine 1994 The Sidel SBO 10 Used Blow Molding Machine 1994 is a high quality machine manufactured by Sidel This machine is designed to create containers made from PET material and comes in a format of 1 5 L The model number of this machine is SBO10 and it was produced in the year 1994 The Sidel SBO 10 has a speed of 10000 bottles per hour making it an ideal choice for businesses looking for a reliable and efficient production process This machine comes equipped with ten cavities allowing for the creation of multiple containers simultaneously It also includes a preform loader preforms tipper and preforms unscrambler which work together to ensure that the preforms are loaded and positioned correctly for the blow molding process The Sidel SBO 10 Used Blow Molding Machine 1994 does not come equipped with a compressor or chiller so these will need to be provid ...

Sidel SBO 20 Universal Aseptic Bottling line - Capacity: up to 40.000 bph by 500 ml / 28.000 bph by 1500 ml Products: fruit juices Bottle formats: 200 ml, 500 ml, 1500 ml, 1750 ml Year of manufacturing: 2011 consisting of: 1. SIDEL SBO 20 Universal PET blowing machine, year of manufacturing: 2011 composed of: – preform tipper – preform hopper, unscrambler and infeed rail – Sidel ARS system HP air low consumption – Eco2 oven with 20 heating modules for 38 neck – blowing station for 20 quick change shell molds, – Compressor ABC 4HP-4-LT complete but without cooling tower moulds are not included 2. Sidel Rafale air conveyor system from exit Sidel blower to entry Sidel aseptic filler with curves etc – length approx. 250 meters also with full automation & drive and electrical panels. 3. Sidel Sensofill FMA 80/24K BS 13 aseptic tribloc, composed o ...

PET Blow molding machine SIDEL SBO 18 Manufacturer: SIDEL Model: SBO 18 Manufactured in: 2001 Capacity: 26.500 bph Working hours: approx. 44.000 hours The machine was uploaded with a new program in 2006 and its output upgraded to 26,500 bph. The machine includes preform tippers for 2 Octabins each. Preform vertical conveyor up to the entry into the machine.

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

SIDEL SBO 16 / 20 Universal Eco2 Predis Ul.Cl. PET blowing machine for 16 hot or cold moulds. The manufacturing year is 2011 and the capacity is of 25.600 BPH (1.600 bpm/h). The moulds are hot up to 75°C (or standard) and the machine is equipped with quick change for moulds. The oven type is Sidel Universal Eco2 C3 special filters. The number of heating modules are 20. Personalization for preform neck 38mm 3 starts. Machine equipped with: - Sidel preforms tipper, hopper & feeder - Sidel AGR preforms disinfection - Sidel Predis Ultra Clean - Vulcanic water/oil thermoregulator - Sidel PCC drive & electrical cabinet Regular maintenance and service by SIDEL. The machine is still installed and has to be dismantled. If you are interested, you can contact us for further information and to discuss about the availability.

Blowing machine SIDEL SBO 14 Universal year of manufacturing: 2007 neck type: 38 mm widemouth capacity: 25.200 bph incl. preform feeding system without chiller and moulds

Sidel SBO 2F Blowmoulding machine Sidel with 2 molds of 2,400 bottles per hour, the condition of the machine is also excellent.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.

Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours

Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used

SIDEL SBO 12 serie 2 blow-moulding machine for 12 moulds. Personalization for preform neck PCO 28. The manufacturing year is 2002 and the capacity is 15.000 BPH. Machine equipped with : - Preforms tipper & hopper - Electrical cabinet - Sidel control panel The machine is no more in production and is already professionally dismantled. The machine is in good condition. If you are interested by this machine, you can contact us by mail for further information and discuss about the availability.

SIDEL SBO 14 Universal PET blow-moulding machine for 14 moulds. The manufacturing year is 2006 and the capacity is of 28.000 BPH. The machine is equipped with a quick change or shell moulds. Personalization for preform neck PCO28 1810. Machine equipped with: - Preforms tipper - Preforms hopper - Electrical cabinet - Sidel control panel & PCC - Air conveying system in option The machine is in very good condition which makes it a good opportunity. If you are interested by this machine, contact us for further information and to discuss the availability.

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2001 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

SIDEL type SBO 6 Serie 2 Year: 1999 Capacity: 7.800 bph Number of moulds:: 6 Equipped : quick change for shell molds Oven type : Sidel caterpillar oven Neck personalization: still mineral water 30/25 Working hours: low working hours Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel electrical cabinet & PCC including HP compressor & chiller also Sidel air conveying system Equipment in good condition Available immediately

Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL

Manufactured: SIDEL SBO 16/20 Universal Eco2 Predis ultra clean YOM: 2011 Nominal capacity: 32.000 bph Current capacity: 25.600 bph in 2.0 L rect. Number of molds: 16 Equipped: with Sidel ARS air recycling system Neck personalization: 38 mm Unit complete with: •Preform tipper, hopper and feeder •Preform disinfection •Sidel ultra clean Predis

W 84 | BLOW MOULDING MACHINE SIDEL YEAR: 1998 SPEED: 7.200 BPH SUL 1.5 L MODEL: SBO 6/10 SERIE 1 NUMBER OF CAVITIES: 6 BOTTLE NECK FORMAT 29/25 MM PREFORM ELEVATOR/ORIENTATOR STAMP NOT INCLUDED WORKED HOURS: 47.000 SAFETY PROTECTIONS

Blowing machine SIDEL SBO 16 / 20 capacity: approx. 25.000 bph - by 2,0 ltr. PET bottles year of manufacturing: 2011 working hours: 37.000 max. capacity: 32.000 bph neck type: 38 mm widemouth neck includes: - preform tipper - preform hopper / elevator - Sidel AGR preform disinfection - Sidel Predis Ultra Clean - vulcanic water/oil thermoregulator - electrical cabinet - control panel - Sidel PCC The machine is in an excellent conditon.

Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000                   Number of moulds: 18            Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storag ...

Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included More then 300 machines new and second hand on our seema .de

Blow volume 0.25-3.0 ltr. PET, 6 stations, up to 7,200 bottles/hour, inckl preform silo, steep conveyor and installer. Moulds, compressor and water cooler available at an additional cost. Good condition!

Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg

Used Blow Moulding Machine Sidel SBO6 2 Year 2005 9000 bph The machinery has been disconnected from the functioning production The PLC is present and its functionality is ensured The machinery as a whole is in a good state of maintenance pre production maintenance is still recommended because the blow molding machine has been in storage for about 12 months Transport is a large load therefore outside the normal gauge We can supply all necessary spare parts for this blow molding machine [...for more information send your inquiry to the seller.] refno: SO81

Used Blow Molding Machine Sidel 1992 Manufacturer SIDEL Model SBO2 Year 1992 Speed b h 3000 Processed formats 0 25ml 2 liter Accident prevention protections Yes Manuals available Yes Revisions available Yes Operating status In production Number of cavities 2 Preform neck type Preform 1881 weight 9000kg Quick format change Yes Preform loader Yes Preform orientator Yes Compressor No Chiller No Air recovery system No PLC type Mitsubishi Spare parts available Yes Hours worked 2000 Consumption Volt 360 Kw 40 Hz 100 Notes Machine working stabile suitable to be connect with filler machine The machine has been completely updated hmi electronics and new plc [...for more information send your inquiry to the seller.] refno: SO96

Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25           Working hours: 47.000 only            Machine was regularily maintained       Machine equipped with:                     Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request

Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000                   Number of moulds: 18       Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control

Overview The blow moulder was built in 2011 by French manufacturer SIDEL. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details        Working hours: 37.289 h Capacity Max. 32.000 bph Recently produced at 25.600 bph at 2.0L Number of moulds: 16 hot or cold molds Molds: Hot molds up to 75°C, or standard Equipped with quick change Oven type: Sidel Universal Eco2 C3 special filters Number of heating modules: 20 modules Neck personalization: 38 mm Machine was regularily maintained                           Machine equipped with:                     Sidel preforms tipper Sidel preforms hopper & feeder AGR preforms disinfection Sidel Predis Ultra Clean Vulcanic water/oil thermoregulator Sidel electrical cabinet Sidel control panel Sidel PCC

Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. Slat conveyors year ...

W 85 | PET BLOWER SIDEL SBO 6 YEAR: 1999 SPEED: 7.800 BPH MODEL: SBO 6 SERIE 2 NUMBER OF CAVITIES: 6 PREFORM TIPPER SIDEL HOPPER AND PREFORM FEEDER SIDEL STAMP NOT INCLUDED SAFETY PROTECTIONS

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

3 series of molds 0.5--1.0--1.5 lt SIDEL SBO 8 Series 2

1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.

Line for pouring water or other liquids in 2 L packages The line consists of: - PET bottle blower from Sidel SBO 4 - the feeding tunnel of the bottles of own production - Pourer Nagema BF-60 with bottle screwdriver 12 head - Nagema saturator type KOMI - Spomasz label - bottle packer with control cabinet - electric welding furnace + fan for cooling the welding machine - Pragometal pallet wrapper Used machines, for technical inspection It is possible to contact the buyer with the company performing inspections and relocation of machines.

thickness of jaw: 160 mm clamping capacity: 24 kN weight of the machine ca.: 31 kg mechanical centric vice, low construction With prism jaw and standard jaw SBO size 4 including turntable with graduation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SUPPLY OF A SECOND-HAND BOTTLING LINE FOR SOFT DRINKS PRODUCTS: SOFT DRINKS FORMATS: 0.5 lt - 1 lt - 1.5 lt RATED SPEED: 12,000 bph for 1 lt format Composition: LISTE OF MACHINES 1) COOLING 2) BLOWER SIDEL SBO 12 3) AIR CONVEYORS 4) FILLING TRIBLOCK PROCOMAC 5) KRONES LABEL 6) SHRINKABLE FILM WRAPPING MACHINE Brand: SMI 7) PALLETIZER Brand: EMS GROUP - 8) EXPANDABLE PACKAGING TOSA 9) SYSTÈME CIP KBB 10) MIXER 11) KBB INSPECTOR 12) PALLET MARKER

A line for the production of water packed into PET bottles in the following formats: 0.5 L, 1.5 L and 2.0 L. Line capacity: approx. 15,000 bph The line consists of the machines sent in the previous messages: 1) KHS filling triblock filling machine 45-80-10 1998 (approx. 20,000 bph), control: SIEMENS S7-200 - washing KHS, Innoclean FR-EM 45 bottles - KHS filler, Innofill EV 80 - capping machine ALCOA KUPI 10/540 (max. 25.000 bph) 2) labelling machine KRONES Contiroll 745 - 2000 (16.000 bph), control: S7-300  3) PET BOTTLE BLOWING MACHINE - SIDEL SBO 16 - 1998 (16.000 bph) 4) packing machine with a tunnel - ZVT PSP 032 S, year 1998 5) device for controlling the level of liquid in bottles - METEC Promecon 2000 5) LANFRANCHI air conveyors with control cabinet (transport of PET bottles from SIDEL to KHS)  6) a set of KHS Innoline plate conveyors - several ...