sb 40 used for sale

Two-hand machine control, safety two-hand control switch TELEMECANIQUE (PREVENTA) XY2-SB65 240 V 3 A IP 65 out of need ! New ! Dimensions: 600 x 200 x 100 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO250-3,5E1/112U-210AK Content: 3,5 l operating pressure: 210 bar Pmax: 310 bar operating temperature: -10 °C - 80 °C connection thread: G3/4 material ( storage body ): steel material ( storage bladder ): BR20 (acrylonitrile butadiene) spare part for machining center HECKERT CWK400 D !, among others used, tested ! Dimensions: 340 x 190 x 215 mm

Subplate, connection plate, base plate PARKER A064R3/8-SB2 Connection size: 3/8 4x stud bolt M5 x 120 mm, with screw spare part for machining center HECKERT CWK400 D ! used ! Dimensions ( base body ): 70 x 85 x 50 mm Dimensions ( complete ): 105 x 85 x 180 mm

Flow control valve, lowering brake valve, hydraulic valve HAWE SB2522G-35 S902 303 F Response flow: 35 l/min operating pressure: max. 315 bar installation length: 100 mm used, tested ! Dimensions: 125 x 35 x 30 mm

Diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO200-1E1/112U-200AB Content: 1,,0 l Pmax.: 200 bar T: -10 - 80°C Hydraulic connection: Female thread: G1/2 ( inch ) / External thread: M33 x 1.5 Width across flats: 41 mm Filling connection: Internal thread: Male thread: M28 x 1.5 New ! Dimensions: 205 x 137 x 137 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO140-1,,4E1/112U-140FT080 Capacity: 1.4 l Pmax.: 140 bar T: -10 - 80°C Hydraulic connection: Male thread: M18 x 1.5 width across flats: 30 mm Filling connection: Female thread: Male thread: M28 x 1,5 New ! Dimensions: 210 x 145 x 145 mm

Membrane accumulator, bladder accumulator, pressure accumulator HYDAC SBO250-3,5E1/112U-210AB Capacity: 3.5 l Pmax.: 210 bar T: -10 - 80°C Hydraulic connection: Female thread: G3/4 ( inches ) / External thread: M45 x 1.5 Width across flats: 46 mm Filling connection: Internal thread: External thread: M28 x 1.5 New ! Dimensions: 345 x 170 x 170 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO330-3,5E1/112UA1A9A11S1-330AK180 Capacity: 3.5 l Pmax.: 330 bar T: -10 - 80°C Hydraulic connection: Female thread: G3/4 ( inch ) width across flats: 46 mm Filling connection: Female thread: Male thread: M28 x 1.5 New Dimensions: 330 x 173 x 173 mm

Thrust drive, electric actuator, with FE electronics WITTLER SBA06-3/E - WSEY 24.1 actuating force: 1,2 kN travel range: max. 35 mm actuating speed: 10 mm/min Flange inner diameter: 35 mm power consumption: 5.0 W operating voltage: 24 V AC 50 / 60 Hz IP 43 used, tested ! Dimensions: 250 x 130 x 130 mm

coolant filter system, coolant system, filter system SOMMERMEYER SB20 coolant tank: 1200 x 500 x 200 mm ( 120 l ) coolant pump: MEZ BRNO 3COA2-22 0,42 l/ sec ( 25,2 l/min ) engine 0,09 kW 220 - 254 / 380 - 440 V 3AC used, tested ! Dimensions: 1210 x 600 x 510 mm

diaphragm accumulator, bladder accumulator, pressure accumulator HYDAC SBO250-0,075E1/112U-250FR080 Capacity: 0.075 l Pmax.: 250 bar T: -10 - 80°C Hydraulic connection: Male thread: 3/8 ( inch ) Width across flats: 30 mm Filling connection: Male thread: M28 x 1.5 New ! Dimensions: 165 x 65 x 65 mm

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

Electric Hand Drill, Electric Drill, Drill WMW, POWER TOOLS SEBNITZ SBM 450.2 ( SBM 450.2 ) 0.45 KW 500 / 2000 rpm 220 V 1AC 50 Hz drilling capacity: max. Ø 13 mm tool holder: M12 x 1.25 Length: 14 mm approx. 2.5 m Connection cable used, tested ! Dimensions ( without cable ): 300 x 180 x 75 mm

Schliessrahmen - Frame SBG Letter Press Heidelberg SBG A4  -4 Frame SBG Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Membrane accumulators, bladder accumulators, pressure accumulators HYDAC SBO100-2E1/112U-100AK Contents: 2,0 l Pmax.: 100 bar D: -10 - 80°C Hydraulic connection: Female thread: 3/4 ( inch ) Wrench size: 46 mm Filling connection: Male thread: M28 x 1.5 New ! Dimensions: 220 x 160 x 160 mm

Built-in dishwasher BOSCH SBV4HB800E/17, type SD6PW1B, exhibition unit

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Surface-mounted luminaire, industrial lamp, wall and ceiling lamp SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Surface-mounted luminaire, industrial lamp, wall and ceiling luminaire, with emergency luminaire SCHREIBER KH 400-HME ( KH400-HME ) Article number: 670 740 400 W 230 V AC 50 Hz New ! Dimensions: 430 x 185 x 600 mm

Control box, pre-wired PAGUS 400 x 400 x 200 mm 4x push button 1x toggle switch 4x indicator lights 1x power contactor 1x power contactor with auxiliary switch and thermal motor contactor 3x miniature circuit breaker control box: 400 x 300 x 200 mm used, checked! Dimensions: 420 x 300 x 240 mm

Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 400 x 400 mm Working height: 60 mm Groove width: 14 / 24 mm Dimensions: 400 x 400 x 60 mm

Pneumatic cylinder FESTO DNGU-32-400-PPV-A S3 158098 stroke: 400 mm rod diameter Ø 12 mm Dimensions: 545 x 95 x 50 mm used tested.

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm working height: 115 mm all threads on clamping surfaces M12 x 1,75 Pitch: 50 mm holes ( top ): Ø 20 / 50/55 mm holes ( bottom ): 2x Ø 25 mm width guide ( bottom ): 160 / 200 / 300 mm Height guide (bottom): 55 / 30 / 65 mm spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 550 x 400 x 115 mm

grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes (top): Ø 20 / 50 mm holes (bottom): 1x Ø 32 mm, 2x Ø 25 mm, 3x Ø 18 mm bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm used, tested ! Dimensions: 490 x 400 x 95 mm

Grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes ( top ): Ø 20 / 50 mm fixing bolt ( top ): Ø 50 x 10 mm holes ( bottom ): 1x Ø 32 mm, 2x Ø 25 mm thread (bottom): 4x M16 x 2.0 bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 490 x 400 x 105 mm

Pneumatic cylinders, round cylinders, double-acting NORGREN RA/8063/M/400 stroke: 400 mm piston diameter: Ø 63 mm rod diameter: Ø 20 mm rod thread: M16 x 1.20 5, Length: 30mm pmax: 1.0 -16.0 bar New ! Dimensions: 600 x 76 x 76 mm

Pneumatic cylinder NORGREN RA/8160/M/400/H stroke: 400 mm Rod diameter: Ø 40 mm pmax: 16 bar Pivot: Ø 40 mm New Dimensions: 750 x 280 x 180 mm

Pneumatic cylinders, standard cylinders FESTO DNG-40-400-PPV-A 36343 DSBG-40-400-PPVA-N3 1646557 stroke: 400 mm rod diameter: Ø 16 mm pmax: 12 bar New ! Dimensions: 565 x 55 x 55 mm

Fittings with plug-in connection REXROTH MECHMAN Series QR1 Standard 10 x straight fitting 212 100 405 0 10 x elbow fitting 212 200 405 0 thread: M5 hose diameter: Ø 4 mm fitting set consists of - 20 fittings ! New ! Dimensions: 60 x 60 x 65 mm

pneumatic cylinder, standard cylinder, double-acting, with flexo coupling FESTO DNC-50-400-PPV-A 163379 stroke: 400 mm rod diameter Ø 20 mm rod thread: M16 x 1,5 pmax.: 12 bar with flexo coupling FK-M16X1,5 used, tested ! Dimensions: 740 x 65 x 65 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-40-400-PPV 163361 stroke: 400 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25 pmax: 12 bar spare part for machining center HECKERT CWK400 D !, among others! used, tested ! Dimensions: 565 x 54 x 54 mm

Linear actuator FESTO DGPL-40-400-PPV-A-B-KF-GK-SH 175136 stroke: 400 mm piston diameter: Ø 40 mm Carriage: 167 x 82 mm pmax: 8 bar New ! with documents ! Dimensions ( Linear actuator ): 700 x 97 x 91 mm Dimensions ( packaging ): 730 x 200 x 150 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS working surface: 400 x 400 mm height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

Welding table, straightening table, straightening pad, work table, clamping table straightening plate, straightening table, spotting plate HAHN & KOLB, IFA ASCA Working surface: 400 x 400 mm DIN 876 height: 100 mm used, tested ! Dimensions: 400 x 400 x 100 mm

Clamping bracket STANKO clamping surface: 400 x 400 x 64 mm bridge width: 30 / 88 / 90 / 87 / 33 mm Groove width: 18 / 32 mm Groove depth: 35 mm Mounting surface: 400 x 270 x 35 mm 2x slotted hole: Ø 20, Length: 120 mm used, tested ! 85 KG (heavy duty) Dimensions: 400 x 400 x 270 mm

Compact cylinders, pneumatic cylinders, double-acting FESTO DNC-32-400-PPV-A 163315 1376429 piston diameter: Ø 32 mm stroke: 400 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar with flexo coupling: FK-M10X1,25 ( 6140 ) used, tested ! Dimensions: 625 x 45 x 100 mm

Description: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 550 x 450 x 195 mm, weight approx.: 90 kg

fitting to Orion or Zenit filters, without seals Number available (price per tank): 70 material: NORYL  40x 40 customs no.: 84212200 More then 300 machines new and second hand on our seema .de

stainless steel, for Orion filter  More then 300 machines new and second hand on our seema .de

Cooling unit Bitzer 4P-10.2Y-40P with condenser condenser for TK or Plus cooling. For more information call 00436641838175 or Info@frigocom.at

Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Extrusion press with 400 mm Ø, 55 kW drive, hard cast screw and pre press PZSVG 40 (built 1996, 15 drive), on 4 hydraulical posts. Complete, incl. 1 set spare parts (replacement screw and windlass).

- max. Hobelbreite 405 mm - min. / max. H obelhöhe 8 / 170 mm - min Werkstücklänge 250 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 4000 Upm. - Messerwellen FI 100 mm, Z 4 - Vorschub stufenlos regelbar 7 - 20 m/min. - Motor obere Welle 7,5 kW - Motor untere Welle 5,5 kW - Vorschubmotor 1,5 kW - Motor Höhenverstellung 0,5 kW - Gesamtleistung 15,0 kW - Absaugstutzen FI 130 mm - Arbeitstisch 482 x 2185 mm - hart vercromte Tische - schnell Wechselvorrichtung für Hobelmesser - Gleitmittelpumpe - elektronische Werkstückstärken Einstellung - Digitale Anzeige der Werkstückhöhe - CE Konformität - Abmessungen L=2200, B=900, H=1700 mm - Gewicht 1900 kg

Technische Daten: - max. Hobelbreite 405 mm - min. / max. H obelhöhe 8 / 200 mm - min Werkstücklänge 100 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 5000 Upm. - Spiralmesserwelle mit HM-Wendeplatten 15x15x2,5 mm, FI 100 mm - Vorschub stufenlos regelbar 8 - 24 m/min. - Motor obere Welle 7,5 kW - Motor untere Welle 5,5 kW - Vorschubmotor 1,5 kW - Motor Höhenverstellung 0,5 kW - Gesamtleistung 15,0 kW - Absaugstutzen FI 130 mm - Arbeitstisch 482 x 2185 mm - hart vercromte Tische - motorisch angetriebenes Transportband im Einlauf - schnell Wechselvorrichtung für Hobelmesser - Gleitmittelpumpe - elektronische Werkstückstärken Einstellung - Digitale Anzeige der Werkstückhöhe - CE Konformität - Abmessungen mit Transportband L=3570, B=900, H=1700 mm - Transport Abmessungen L=2650, B=950, H=1850 mm - Gewicht 2100 kg

Technische Daten: - max. Werkstückabmessungen 400 x 250 mm - min./max. Abstand vom Sägeband zum Transportband 4 - 125 mm - Breite Transportband 385 x 5480 mm - Rad Durchmesser 711 x 51 mm - min. Werkstücklänge 200 mm - Vorschubgeschwindigkeit stufenlos 5 - 25 m/min. (Standard:15 m/min., optional:25 m/min.) - Sägebandabmessung 4470 x 27 x 0,90 mm - Antriebsmotor 15,0 kW - Hydraulik Motor 2,2 kW - Motor Höhenverstellung 1,5 KW - Spannung 400 V / 50 Hz - Absaugstutzen 4 x 100 mm - Kühleinrichtung - pneumatische Abdrückrolle im Einlauf mit Stoßdämpfer - pneumatische Andruckrolle für präzises Sägen - die Kombination von dünnem Sägeband und präziser Sägebandführung   ermöglicht die Herstellung extrem dünner Lamellenstärken - min. Lamellenstärken von 1,0 - 2,0 mm - glatter, verleimfähiger Sägeschnitt - Sägeband Schnittfuge von 1,2 - 1,6 mm (50% Materialeinsparung) - Sc ...

Complete circuit breakers with motor drive and auxiliary contacts Motor drive 24V

Double folding lock needed little used

To check torque on air and electric screwdrivers.