sawing machine used for sale

Double edging Pilous DB700M, built in 2023, like new, incl. saw blades, 11 kW, approx. 700 kgPrices subject to change, errors, printing and typesetting errors excepted

Pilous CTR520 log band saw, good condition, cutting length 5.8 m, max. 550 mm trunk diameter, 4 kW S1, 3110 mm cutting length, 310 kgPrices subject to change, errors, printing and typesetting errors excepted

Solid band mill for materials up to the diameter of 130 cm. Soft starter is included, with extending sections expandable. Automtic feeder with variable speed. Electrically height adjustment adjustable from control panel. With hydraulic log taber, log turner and clamping tool. CE Technical details: main engine power 22 kW S1 cutting length 6,7 m max. trunk diameter 130 cm weight 2800 kg

Mobile sawmill Logosol B1001, year 2020, very good condition, 23 hp engine, hydr. Trunk compensation, XL trunk mount, trailer kitPrices subject to change, errors, printing and typesetting errors excepted

Dimensions (L/W/H): 1300x2070x1135 mm Weight: 320 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand automatic saw socket production line Mfc.: ADIGE SYS Type: BC 80 Built: 2022 The BC80 is a high-productivity vertical rotary transfer machine that allows you to cut and chamfer tubes and solid bars. Its main features include: fully automatic operation; separate management of scrap and chips; protection for fragile tubes; centralized adjustment for diameter changes; and a simple and intuitive graphical interface. The BC80 is the highest-performing and most efficient solution on the market for the continuous, 24/7 production of bushings up to 80 mm in diameter and from 10 to 350 mm in length. The BC80 can produce up to 2200 parts per hour, cut to length, chamfered, and inspected from a tube or solid bar. Round tube cutting capacity: min. 10 mm (0.4") - max 80 mm (3.15") Bar cutting capacity: 60 mm (2.4") Workpiece length: min. 10 mm - max. 350 mm Loader l ...

Drilling and sawing machine for side rails Franke type SG Technical data: Station 1: Cutting components to length Station 2: Drilled on the front side in increments of 27, 32 or 60 mm, 95 mm deep Station 3: drill another hole on the front side or the holes from station 1 are blown out Station 4: Deflection Testing

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 400 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

automatische bandzaag ronde inhoud: 360 mm Capaciteitsvierkant: 360 x 360 mm spanentransporteur Depth of throat: 360 mm Max height of workpiece: 360 mm Table travel : Manual (1) -- hydraulic (2): hydraulic Sawspeed: 20 > 80 m/min Length of band saw: 4420 x 32 x 1,1 mm Power needed: 3,7 kW Length : 2500 mm Depth : 2200 mm Height: 1600 mm Weight: 2 ton

Max. diameter of the cut material ... 300mm Control Siemens ... Simatic S7-1200 Machine weight ... 1420kg L x W x H ... 2600x2080x2140mm The machine is in good condition. if possible under power.

Code: 0475 Brand: STRIEBIG - SWITZERLAND Model: AUTOMAT TRK 6220 AV Automatic vertical panel saw with scoring unit for precise cutting of wood panels, custom furniture, kitchens, bathroom furniture, doors, window frames, plastics, composite materials and various Technical data: Cutting length mm 5300 Cutting height mm 2200 Cutting depth mm 80 Blade diameter mm 300 F30 Speed rpm 4750 Motor power Kw 5,5 Scoring unit Support rollers on the table to facilitate panel handling Automatic vertical movement with speed regulator Automatic horizontal movement with speed regulator Intermediate support for small panels Suction mouth diameter mm 100 Overall dimensions of mounted machine : mm 6760 x 1800 x 3015 h Weight kg 1050 Overall dimensions for transport : Machine mm 6760 x 1800 x 2650 h - kg 450 - Beam mm 3000 x 1000 x 1000 h - kg 600

Log band saw Mebor Type: HTZ 1100 Year of Make: 2001 Motor power 22 kW Maximum cutting width 900 mm Maximum cutting length 8000 mm Maximum trunk passage frame width with seat 1450 mm Maximum trunk clearance frame width without seat 1700 mm Clearance height cutting height maximum 700 mm Complete with sharpening machine and spare sharpening discs Saw blade roll diameter 110 mm Saw blade roll width 95 mm Saw blade length 7200 mm Saw blade width 110 mm Including saw blades 7 pieces With log turner 3 hydraulic stem clamps Hydraulic pump 4 kW The height adjustment works electrically via a motor mounted above the sawing unit. The height is adjusted via 2 trapezoidal threaded spindles, which are connected to each other via a chain running in the frame. The saw unit drives itself. The operator goes along. Ready for immediate use and immediately available Dimensions built ...

APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55–170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Saw blade diameter: 350 x 2,5 x 32 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 170 x 90 mm Motor output: 1,8 kW machine weight ab.: 500 kg dimensions: 1200 x 800 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bekamak BMSY-440DGH Depth of throat: 610 mm Max height of workpiece: 440 mm Sawspeed: 15 > 120 m/min Length of band saw: 5200 x 34 x 1,1 mm Power needed: 3 kW Length : 2800 mm Depth : 1210 mm Height: 1870 mm Weight: 1540 kg

Macc Special 391 A Depth of throat: 320 mm Max height of workpiece: 300 mm Sawspeed: 38 > 77 mm/min Length of band saw: 3200 x 27 x 0,9 mm Length : 3385 mm Depth : 2045 mm Height: 1820 mm Weight: 960 kg

Sliding table saw Eima Type 120 Max. Cutting Width: 2068 mm Min. cutting width: 300 mm Maximum blade diameter 400 mm Cutting height ~100mm Motor power 2×4.4kw Electronic Cutting Width Eats Technical documentation and CE certificate Year of manufacture 1999

90° round: 340 mm 90° rectangular: 700 x 340 mm 45° right: 400 x 340 mm 45° left: 400 x 340 mm Depth of throat: 700 mm Max height of workpiece: 340 mm Sawspeed: 17 > 120 m/min Length of band saw: 5800 x 38 x 1,3 mm Power needed: 4 kW Length : 3250 mm Depth : 1700 mm Height: 1850 mm Weight: 2300 kg

Offer 26343 Technical data: - Saw blade dimensions - vertical 650 x 4.4 x 50 mm positive - Horizontal 500 x 4.4 x 40 mm positive - Notching range 90° at approx. H 260 x D 190 x W 140 mm - 4 axis – NC control for cutting angle, notching height, notching depth - Vertical saw blade can be swivelled 45° outwards + 60° inwards - Horizontal saw blade can be swivelled 60° upwards and 55° downwards - Mitre stop of the profile support adjustable 60° to the left + right - Movable material support table - Pneumatic material clamping - Pneumatic coolant spraying device - 2 saw blades - Pneumatic connection 6 bar - Drive 400 V / 2 x 3 kW / 2800 rpm - Space requirement approx. W 1600 x H 1500 x D 1100 mm - Weight approx. 1300 kg

Auction-ID: A1-41281-8

Auction-ID: A1-51321-3

Cutting Capacity Round Cut: 420 mm  Square cut: 420 mm  Beam Cut (max): 420 x 330 mm  Minimum cutting capacity: Ø 45 mm Minimum rest (in bundle): 80 mm  Performance and Kinematics Blade dimensions: 5550 x 41 x 1.3 mm  Blade speed: Variable from 18 to 80 m/min (up to 90 m/min with inverter)  Arc Feed: 0 - 3000 mm/min Feeder carriage stroke: 500 mm (automatically repeatable via NC)  Feeder carriage speed: 0 - 6000 mm/min Motorization and Hydraulic System Blade motor power: 3 kW Hydraulic Power Unit Capacity: 115 liters Hydraulic Pump Flow Rate: 23 l/min  Coolant pump power: 0.15 kW Auction-ID: A7-51375-13

Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg Auction-ID: A1-40333-90

FORTE KST APG 0413 sawing machine Cutting Capacity (Round): Up to 410 mm in diameter Cutting Capacity (Square): Up to 410 x 410 mm Maximum Single Feed Length: Approx. 500 - 600 mm (automatically repeatable for longer lengths) Blade Development Dimensions: Approx. 5,800 x 41 x 1.3 mm Blade motor power: 5.5 - 7.5 kW Complete with chip conveyor Total Machine Weight: About 2,800 kg Floor Dimensions (L x W x H): Approx. 2,900 x 2,200 x 2,100 mm Auction-ID: A7-51375-34

The machine must be dismantled and loaded by the buyer himself. The transport and loading equipment that may be required for this purpose must be organized and provided by the buyer himself. The collection must take place by 11.12.2026 at the latest. If the machine has not been picked up by this date, it will be relocated or, if necessary, disposed of at the buyer's expense. Auction-ID: A7-51502-1

Heavy-duty industrial horizontal metal-cutting bandsaw manufactured by TOS / KMPK Hradec Králové, Czechoslovakia. Specifications / details: Application: Metal cutting Horizontal saw configuration Integrated material vice/clamping system Adjustable material stop/guide Manual vice and positioning controls Enclosed belt/pulley drive section Heavy cast machine base Coolant/fluid system components visible The machine is a traditional workshop-type horizontal bandsaw intended for cutting steel bars, tubes, profiles and other metal stock. Auction-ID: A1-51282-134

Industrial single-wire sawing machine designed for squaring and profiling large natural-stone blocks and for producing slabs from marble, granite and similar materials. The machine is equipped with a vertical gantry arrangement and large wire guide/drive wheels. Cutting is performed using a continuous diamond wire passing around the stone block. The system incorporates automatic/programmed cutting control and inverter-controlled drives. Technical details: Useful cutting area: approx. 4,000 × 2,200 mm Diamond wire length: approx. 20 m Diamond wire speed: approx. 17–40 m/s Total installed power: 20 kW – confirmed by machine plate Supply: 400 V / 50 Hz / 3-phase Rated current: 40 A Approx. machine weight: 4,200 kg Automatic cutting-cycle programming Multiple-cut programming Variable wire speed via frequency inverter Vertical wire positioning/feed Large-diameter wire guide ...

Evolution X230 Extreme TCT steel cutting circular saw, 230 mm / 9 inch, with original carrying case. Portable electric tool with laser guidance system. Auction-ID: A1-51153-57

Plastic garbage can sawing machine custom-made by Silberland for central division of plastic waste bins 120 & 240 litres Year of manufacture 2018 Electric drive approx. 3.25 kW Feed chain belt conveyor Center distance 7.5 m x groove second 600 mm Band saw usable height 760 mm x usable width 650 mm Control cabinet with control Enclosure Documentation available System dimensions: length 11,945 mm x width 1,500 mm x height 2,510 mm Net price ex site 25,900,-- € + VAT Sale from location BL Thuringia Code No. P50

Professional cross-cut and circular saw for light alloy and aluminium 350 mm saw blade. Equipped with a pneumatic double clamping device (when lowering the saw head). Designed for mitre and inclined Electro Adda three-phase motor (1.5 kW / 1.8 kW, 400 V). Mounted on the original S Accessories: Includes left/right mounted material roller conveyor with integrated L (millimeter scale) and a set of replacement cross blades for non-ferrous metals. Speeds: 2 stages (30 and 60 rpm) optimal for steel and stainless steel Cutting capacity (at 90°): Round up to 125 mm, rectangular up to 160 x 90 mm Mitre: Can be swivelled up to 45° to the left and right Special features: Cone safety coupling to protect the saw blade, integrated automatic cooling, double-bearing saw head Auction-ID: A7-51635-11

Auction-ID: A1-51062-38

Auction-ID: A1-51062-41

Evolution X230 Extreme TCT steel cutting circular saw, 230 mm / 9 inch, with original carrying case. Portable electric tool with laser guidance system. Auction-ID: A1-51509-57

Equipped with: miter saw function, material clamp, including 4x roller conveyor 2000x380x1000mm, manual and extra saws available, according to specification defective. Auction-ID: A1-50997-2

Band sawing machine used Manufacturer: KALTENBACH Type: KBS 750 NA Material Dimensions in the cutting opening 750 x 500 mm Power: 5.5 kW 380V Total dimensions approx. 24 x 18 x 4.5 m The system has been dismantled! Weight approx. 14t approx. at least one semi-trailer is required for transport. Attention! Location Riesa! Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Changes and errors in the technical data, specifications and prices reserved. Attention! We load for you. You just need to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-86

Auction-ID: A1-51499-53

Cutting capacity 220 mm, angle cutting Auction-ID: A1-51499-46

Cutting capacity 220 mm, angle cutting, technical books Auction-ID: A1-51499-40

Cutting capacity 300 mm, angle cutting Auction-ID: A1-51499-41

HSS milling machine tools used Manufacturer: various Type: Total dimensions: approx. 1200 x 1200 x 300 mm Scope of delivery see photos! Changes and errors in the technical data, specifications and prices reserved. Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Attention! We dismantle and load for you. You just have to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-49

Automatic material feed from 3.2 mm sheet thickness Can handle multiple types and sizes of plate from 1 stack. Maximum 120 mm. material thickness. Can cut both length and width. Automatic stacking. 3 stacking patterns: Front Flat, Back Flat centered stacking. Machine can still be seen working Has to leave at the end of January 2027. Auction-ID: A1-47369-3512

General data: Machine: Extrusion & packaging line Extruder type: EST D45 Year (stacker & feeder): 2009 Condition: used Power: 23 kW Supply voltage: 400 V / 50 Hz Aux. voltage: 24 V Air supply: 8 bar Extruder & equipment: Vacuum feeder Control panel with 3 cooling zones Hopper & main gear motor Die heads: Resistance 122 & 182 2 dies for different Ø Line components: Vertical lift platforms (X) Auto belt tables (Y) Roller tables (Z) Feeding device & stacker Delivery roller & feeler cooling Electric board Performance: Hot extrusion packaging Adj. film thickness Film speed: 0–30 m/min No skilled setup required Applications: Packaging of PP-R, PVC pipes & profile products Bar-shaped product packaging with extrusion + PE film Complete extrusion & packaging line EST D45 with integrated feeding, stacking, and die head ...

2 speeds, 1500-3000m per minute, discharge connection: 6-8 Bar. Equipped with: 1-axis Push-up positioning, Length: 7500x500mm, Working width: 350mm with Lenord+Bauer Motorline digital control. Auction-ID: A1-51283-16

Technical data 3D Tour For a detailed overview of the machine and its surroundings, please use our interactive 3D tour: https://my.matterport.com/show/?m=17BZf8WepyP Manufacturer: NANSSEN GmbH Type: Sleeve Sawing Machine Model: V 509 C/25 E-Tower Reference No.: 4191 Year of Make: 2000 Saw blade Ø: 300 mm Configuration Counter holder: pneumatic Infeed frame: 2,500 mm Outlet frame: 1,000 mm Dust extraction: 2 mobile dust extractors Auction-ID: A1-51692-33

Dimensions (L/W/H): 8015x1635x2125 mm Weight: 2400 kg Total power requirement: 13,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Machine 1 – GENKO Radial Drilling Machine Manufacturer: GENKO Version: ATB 20 Machine No.: 75048 Radial/swivel arm drilling machine 8 spindle speeds Speed range: 450–4,500 rpm Speed levels: 450 / 650 / 950 / 1,250 / 1,600 / 2,100 / 3,000 / 4,500 rpm Engine speed: 1,400 rpm Horizontally movable drill head Height-adjustable working unit Drill chuck and manual spindle feed Machine substructure with drawers Machine 2 – KUPER horizontal drilling machine Manufacturer: Heinrich Kuper Horizontally arranged drilling spindle Manual workpiece/table adjustment Adjustment via handwheels and control lever Workpiece hold-down available Woodworking workbench Stationary casting machine version Auction-ID: A1-51205-8020

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg