sawdust used for sale

Included 2 containers, filter, roof. Without spec. floor Air inlet 4x300mm Air outlet 4x500-600mm Explosion protection

Approx. Onsite Dimension. (l x w x h): 1,400 x 500 x 2,200 mm, weight approx.: 50 kg

Siebmaschine Vibration classifier workshopoverhauled Make: Allgaier Type: ARSM 33-7,5 Screening area: approx. 7.5 m² with 3 fractions Screening capacity: approx. 80 - 100 m³ / h with 3 fractions (for wood chips and sawdust) Drive power: 5.5 kW Suitable for the following screening materials: -Wood chips -Sawdust -Sawdust - Reclaimed wood -Bark # Screening machine oscillating screen workshop reconditioned Make: Allgaier Type: ARSM 33-7,5 Screening area: approx. 7.5 m² with 3 fractions Screening capacity: approx. 80 - 100 m³ / h with 3 fractions (for wood chips, sawdust) Drive power: 5.5 kW Suitable for the following screenings: - Wood chips - Sawdust - Sawdust - waste wood -Bark

Screening machine | Vibrating Screening Machine Type ASM-300 New machine | Demonstration machine - Make: S&F GmbH - Type: ASM-300 - Design: TOP LINE - Screening capacity: approx. 35 - 40 m³/h (for wood chips and sawdust) - Screening area: 3.0 m² - Fractions: 3 pieces - Screen decks: 2 pieces - Drive power: 2.2 kW - Machine weight: approx. 1,900 kg - Machine colour: RAL 5002 Ultramarine Blue - Screen inserts freely selectable Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibrating screen | Wood chip sieve | Vibrating Screening Machine | Flat sieve | Vibrating screen | Roller classifier | Screening machine for wood chips Screening Machine | Oscillating Screen Type ASM-300 New machine | Demonstration machine - Make: S&F GmbH - Type: A ...

S&F Screening Machine | Vibrating Screening Machine Type ASM-100 used (as good as new) Make: S&F GmbH Type: ASM-100 - #1 Year of construction: 2016 Condition: as good as new Screening capacity: approx. 5 - 10 m³/h (for cross-cut wood, wood chips and sawdust) Fractions: 2 Screen area: 1.0 m² per screen mesh size Screen decks: 1 piece Mesh size of sieve: - 1st screen deck: perforated sheet screen punched, D = 20 mm or by arrangement. Drive power: 1.1 kW L x W x H: 2,300 x 1,250 x 1,050 mm Design: ECO Line Machine weight: approx. 600 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Design of the material outlet according to customer requirements The screening machine has been checked, painted and is in a very good condition (as good as new) (see pictures). Vibrating screen was restored (flange bearings) and new vibrating elements were mou ...

Rudnick & Enners Screening Machine | Vibrating screen type RE-RS 3x6/4F refurbished with new sieve box - Make: Rudnick & Enners - Type: RE-RS 3x6/4F - Year of construction: 1998 - Condition: refurbished - Screening capacity: up to approx. 80 - 100 srm/h (for wood chips and sawdust) - Screen area: 6.5 m² per screen mesh size - Fractions: 3 or 4 - Screen decks: 3 pieces - Drive power: 5.5 kW - L x W x H: 6,000 x 2,800 x 2,350 mm - Machine weight: approx. 5,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of inlets and outlets according to customer requirements Screening machine overhauled with new screen box. Spherical roller bearings and universal joints are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed woo ...

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Ordering no: RE002 TECHNICAL DATA main saw diameter 300-550mm Height of the main saw adjustment vertically for a saw 0300 0-75mm for a saw ⌀350 15-100mm for a saw ⌀400 40-125mm for a saw ⌀450 73-150mm for a saw ⌀500 90-175mm for ⌀550 saw 120-200mm The height of the main saw adjustment at an angle of 45 ° for a saw ⌀300 0-50mm for a saw ⌀350 10-70mm for a saw ⌀400 28-85mm for a saw ⌀450 50-105mm for a saw ⌀500 63-122mm for ⌀550 saw 85-140mm Saw blade tilt 0-45° / (optional) 0-46 ° Length of sawing with an auxiliary table with the strip at the back of the table for a movable table 250 = 2500mm with a strip at the back of the table for a movable table 300 = 3000mm with the strip at the back of the table for a movable table 320 = 3200mm with the strip at the back of the table for a movable table 390 = 3700mm Sawing width using a bumper on an au ...

ADVANTAGES The price applies to the model - 6 axes - programmable tilt and lifting of the main saw, height and left / right position of the scoring unit, longitudinal ruler, transverse ruler - 7 inch touch panel - new machine - CE certificate - warranty from the manufacturer - REMA - professional - Polish production - 6kW main engine TECHNICAL DATA - main saw diameter 300-550mm - Height of the main saw vertical adjustment - for a saw ⌀300 0-75mm - for a saw ⌀350 15-100mm - for a saw ⌀400 40-125mm - for a saw ⌀450 73-150mm - for a saw ⌀500 90-175mm - for a saw ⌀550 120-200mm - The height of the main saw adjustment at an angle of 45 ° - for a saw ⌀300 0-50mm - for a saw ⌀350 10-70mm - for a saw ⌀400 28-85mm - for a saw ⌀450 50-105mm - for a saw ⌀500 63-122mm - for a saw ⌀550 85-140mm - Saw blade tilt 0-45 ° / (optional) 0-46 ° - L ...

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

The line consists of: briquetting press RUF 400 sawdust drum dryer auger belt conveyor - 2 pcs sorter with magazine screw conveyor - 6 pcs wet sawdust container fuel tank wood waste boiler wood waste crusher exhaust fan with cyclone packaging machine with compressor Year of last overhaul: 2023

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

Stable stand sieve swing sieve with 3 decks for wood chips and sawdust. Screen area per deck 8 sqm. Inlet and spouting. Stable drive and steel substructure. Drive motor 5.5 KW. Service flaps. Total length approx. 7.0 m.

Baljer & Zembrod round timber handling, sorting, transport and cutting vehicle - German production - measurement of the length of wood - automatic cutting cycle TECHNICAL PARAMETERS: - diameter max logs 1000 mm - crane outreach max 9200 mm - crane working angle 225" - rotatable head 360 " -Lifting capacity: 2000 mm - 2560 kg 7240 mm - 1680 kg 9200 mm - 1330 kg - truck size 6000x2150 mm - dumper with hydraulic dump on both sides - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m / min SAW HOLTEC FS 121 - log length measurement - working length 1000 mm - hydraulic guide stroke - manual and automatic mode - lifting a log - integrated sawdust extraction 2.2 kW - drum for winding the cable Transport dimensions 12.5 x 2.4 x 2.4 m weight 12000 kg

Brodpol pallet board production line We present a complete line for the production of pallet boards from the Polish manufacturer BRODPOL A line of fully automatic disc sawmills installed and perfected for production. The rope is installed higher, while the entire conveyor belt infrastructure transfers the material between the individual operations, and the waste goes to the chipper. The line consists of Cross feeder with cascade for feeding round wood 4 m Longitudinal feeder before fitting Brodpol TT 5/600/400G fitting. Installed power 166.1kw 3.1. The flis falls into the transport towards the chipper 3.2. The side planks fall on the cross conveyors and are transferred to the off-cutting machine 3.3. The pile is transferred to the centering table in front of the multi-rip saw. 4.WP-165 Double Spindle Multi Rip Saw Installed Mac 132.2kw Cross conveyors dump ...

Three-saw format saw – solid construction TECHNICAL PARAMETERS: .max. cutting width 3050 mm Min. cutting width 450 mm .max. cutting height 100 mm Blade diameter 450 mm motor power 3 x 4 kW feed motor power 1.5 kW Receiving conveyor sawdust 6200 mm material pressure transport dimensions (length / width / height) 620 / 200 / 120 cm weight ~ 800 kg

Belt dryer for sawdust of wood, grain, alfalfa and other similar materials. The plant is disassembled. The system is functional and complete with electrical panel, documents, manual and CE certificate. The plant is from 2002 worked only a few years.

Suction nozzle diameter: 260mm; Nominal flow rate: 7700 m³/h; Bag volume: 2 x 290 l; Filter cleaning: manual; Engine power: 4.8 kW; Dimensions: 1900 x 670 x 2800 mm (L x W x H); Weight: 88 kg; For milling, planing and sawdust (not suitable for dust) 180Â rotatable extraction unit allows extraction from below or above Stable fan wheel made of metal Standard with high-quality chassis for better stability and easy manoeuvring quick-release locks for filter and chip bag fine filter bag double-woven

Briquette press with extraction system Make Mütek Type MPP60 Year of construction 2011 Briquette mould cylindrical Diameter 50 mm Depending on the material, capacity up to 60 kg/h Drive motor 5.5 kW Volume of chip hopper approx. 0.7 m³ Weight of the press 680 kg Dimensions briquette press 1680 mm x 1100 mm x 1500 mm Height with container 2050 mm Including extraction system 33 filters, filter length 1300 mm, diameter 200 mm Extraction system filter area 27 m² Capacity 2,970 m³/h Fan motor power 5.5 kW Intake diameter 300 mm Overall dimensions with extraction system and fan 4300 mm x 1150 mm x height 3700 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, mal ...

Code: 0229 Brand: POR Model: A 100N - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard With covered suction filtering battery ASPIR MECC AM B/64 CS - CE Standard Technical data Briquette diameter mm 65 Max briquette length mm 50/300 Output m3/h 1,454 Motor Hp 10 Drum diameter mm 1200 Pump lt 50 Level sensor Inspection door Cooling unit Overall dimensions mm 2115 x 1350 x 1700 h Weight kg 1000 Covered suction filtering battery SPIR MECC AM B/64 CS - CE Standard - with 64 filtering tubes Flow rate m3/h 8500 Power Kw 0,18 Round attach with connecting flange Overall dimensions mm 2100 x 2100 x 2800 h Weight kg 650

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust) 180Â rotatable extraction unit allows extraction from below or above Stable fan wheel made of metal Standard with high-quality chassis for better stability and easy manoeuvring quick-release fasteners for filter and chip bag fine filter bag double-woven

Briquette Press Briquetting Press Made by Weima Type th 40 Built in 1985 Hydraulic briquette press Capacity, depending on material, approx. 60 kg/h Briquette diameter 50 mm Hydraulic motor 5.5 kW Hydraulic oil 100 liters Length of the machine 1200 mm Width 900 mm, height 1200 mm Weight approx. 650 kg Chip hopper with agitator and screw Dimensions 1600 mm x 1600 mm x H 1300 mm The briquette press also includes an extraction system, which is included in the price. Extraction system Spänex Fan motor power 2.2 kW 6 filters length 1000 mm, diameter 200 mm 1 filter length 1000 mm, diameter 500 mm approx. 4 m² filter area, capacity approx. 442 m³/h Dimensions, dimensions of the chip press with container approx. 3000 mm x 1600 mm x H 1300 mm Dimensions, set-up dimensions of the chip press with container and extraction system approx. 3000 mm x 2500 mm x H 2700 mm ...

Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...

Briquetting Press Briquette Press Spänex Type SHB 50 K1 CE Built in 1986 Hydraulic briquette press With shavings container K1 Briquette mould 8-sided Briquette size 70 mm x 120 mm Capacity 50 kg/h Drive motor 5.5 kW Hours 35665 Wood moisture minimum 8% - maximum 20% Weight of the press 650 kg Chip container size 3m³ Chip hopper with agitator and feed screw Dimensions set-up 1500 mm x 1500 mm, height 2250 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Due to their density, briquettes have a volume reduction of up to 90% in the material and thus an extremely high energy and thus calorific value 2.5 kg of ...

Key data: 1 m²

Type ASA 2403 Airflow 36 cbm/min. Connection 400 V 50 Hz Motor 1.1 kW Speed 2,850 rpm Suction nozzle 1 x 120 mm, 1 x 100 mm Dimensions: 90 x 48 x 210 cm • For milling, planing and sawdust (not suitable for dust) • 180° rotatable suction unit allows suction to be guided from below or above • Sturdy metal fan wheel • Chassis as standard for better stability and easy manoeuvring • Quick-release fasteners for filter and chip bag • Fine filter bag double woven • Chip collection volume 110 l • Filter area 1.92 m²

Sawdust extractor Aspir Eelec 11kw Motor power 11kw Number of filters 48 Filter diameter 220mm Number of collective bags: 6 Diameter of bulk bags 500mm Filter shakers Capacity approx. 11300 m3/h Overall dimensions 340s180s375cmH

–Manual – CE certificate – after technical inspection – very good condition – year of production 2014 - standard feeding table 3m +3m additional = 6m TECHNICAL PARAMETERS: main motor 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed rate adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls diameter of discs 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor belt three take-up rollers stub diameter 2 x 200 mm dimensions length/width/height 300 x 245 x 180 cm weight ~ 3000 kg

Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES)  ...

Year: 2018 - technically efficient - cutting length: 6000mm - discs: 550 mm - E580 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cut according to the external dimension, without correction - cooling installation - vertical pneumatic clamps - automatically lowered and raised shield shields - sawdust extraction - label printer

Metabo HC 260 Thicknesser Built-in, reversible disposable planer chisels Short, tilting guide Sawdust Drain Cap Push stick Suction nozzle Transport wheels Needs to be assembled

Biomass heating with a heating capacity of 5 MW TYPE YOUR-FRR-5000 Bark, wood chips, sawdust, moisture up to 60% Year of construction 1999 Complete furnace with electrostatic precipitator Fuel supply moving floor furnace with dimensions of 7 x 4 m Complete Control A set of pumps, valves

Sawdust extractor IMAS DS3/55 Number of collective bags: 3 Number of filter bags: 3 Inlet diameter fi 250mm Extraction power 4kw CE Certified Dimensions 2240x510x2250mmh

Sawdust extraction 7.5kw Number of filter bags: 4 Number of collective bags: 4 Motor power 7.5kw Capacity about 7500m3 Diameter of the spigot fi Dimensions 345x71x360cmh

MS UBS-6-90 circular sawmill - German production - high efficiency - DTR - year of production 2007 - possibility of installing 6 shields - daily capacity up to 200 m3 max. log diameter 390 mm cutting width from 80 to 250 mm width of the additional board from 18 to 80 mm disc diameter 1000 mm electric disc spacing engine power 2 x 90 kW feed speed continuously adjustable 5-30 m / min 4 kW feed motor power length of the feeding table 8000 mm feed table with chain turners dimensions of the cross feeding table 4500 x 7000 mm length of the receiving table 5600 mm dimensions of the corrugated receiving table 4000 x 4000 mm reception of sawdust with vibrorine two lasers total length 18.5 m weight of the sawmill 9.8 tons

Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225 - rotating head 360 - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5 x 2.4 x 2.4 m weight 12000 kg

Metalref boiler Model BRIK FIRE at wooden wastes Max operating temperature 90° Potential yield 78,000 Kcal/h Outbreak potential 95,000 Kcal/h Main fuel Chips/Sawdust Complete with automatic hydraulic feeder

- German production - measurement of wood length - automatic cutting cycle TECHNICAL PARAMETERS: - maximum log diameter 1000 mm - maximum crane reach 9200 mm - crane operating angle 225 - 360 rotatable head - lifting capacity: 2000 mm - 2560 kg 7240 mm - 1680 kg 9200 mm - 1330 kg - dumper dimensions 6000x2150 mm - dumper with double-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic guide stroke - manual and automatic operation mode - log lifting - integrated sawdust extraction 2.2 kW - cable winding drum Transport dimensions 12.5 x 2.4 x 2.4 m weight 12,000 kg

Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, n ...

FILTERING SUBSTATION FOR WOOD DUST AND SAWDUST FRIULANA VENTILATION - USED - NO. 72 Cotton cloth filter bags with dimensions: FI 200mm - H 2000 mm - Maximum filter FILTERING capacity 13,000 m3/hour - Material: galvanized sheet metal It is equipped with: - Screw conveyor for material extraction - with variable speed drive and gearbox - Rotary valve - 1 fan with 15 kW motor - 1 fan for transporting the material from the filter to the silo (or other storage) - Electro-vibration system for cleaning the filter bags - Electrical control cabinet - Dimensions: 2400 x 2900 x H 5600