119,282 used machines on RESALE, but how to find them? Machine Search
Seller: M&S EXPORT Lippstadt
description: Design : Cast resin transformer Design: Dry Make : SGB Built: 2010 Condition: New Btz0idkxtd Rated power: 1000 KVA Medium voltage: 10 KV +- 2 x 2.5% Low voltage: 400 V Switching group : Dd6Y 5 Frequency: 50 Hz Cooling type :AN Total weight: 2410 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.
Seller: M&S EXPORT Lippstadt
Description: 5 new transformers Type : OIL transformer Execution : Hermetics Make : Schneider Built: 2016 Condition: New Rated power: 1360 KVA Medium voltage: 11 KV +- 2 x 3.5% Low Voltage: 380 V Solar Transformers Switching group: DYN 11 Frequency: 50 Hz Cooling type : ONAN Total weight: 4345 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . Brp2ucps All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.
Seller: M&S EXPORT Lippstadt
Description: 12 New Transformers Design : Cast resin transformer Design: Dry Make : TESAR Built: 2012 Condition: New Rated power: 1250 KVA Medium voltage: 20 KV +- 2 x 2.5% Low Voltage: 270 V Solar Transformers Vueuqq Switching group: DYN 5 Frequency: 50 Hz Cooling type :AN Total weight: 3450 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.
Seller: M&S EXPORT Lippstadt
Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV Year of construction : 2012 Condition : New Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Cqs9sygju Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.
Seller: P.W. REMASZ Michal Obrzut
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OE 1,5kW / VF1530-1500W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 12.0mm, maximum thickness 16.0mm - Stainless steel: Recommended thickness 5.0mm, maximum thickness 6.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 4.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0m ...
Seller: P.W. REMASZ Michal Obrzut
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. Th ...
Seller: P.W. REMASZ Michal Obrzut
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3700 mm - Width: 1800 mm - Height: 2450 mm - Weight: 7000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type ...
Seller: P.W. REMASZ Michal Obrzut
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Distance between side frames: 2600 mm - Max backgauge distance: 615 mm - Nominal motor power: 11.0 kW - Length: 3400 mm - Width: 1800 mm - Height: 2500 mm - Weight: 9000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamp ...
Seller: P.W. REMASZ Michal Obrzut
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Distance between side frames: 2600 mm - Max backgauge distance: 615 mm - Nominal motor power: 11.0 kW - Length: 3400 mm - Width: 1800 mm - Height: 2760 mm - Weight: 9000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-actio ...
Seller: M&S EXPORT Lippstadt
Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV B7ssq0vkzj Year of construction : 2012 Condition : New with 1 year warranty Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.
Seller: Otinus Polska Sp. z o.o.
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Max working thickness (S235): do 8.0 mm - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor ...
Seller: Otinus Polska Sp. z o.o.
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-2580-CNC OT-41 Specifications - Nominal pressure: 800 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 320 mm - Distance between side frames: 1900 mm - Max backgauge distance: 600 mm - Nominal motor power: 5.5 kW - Weight: 4200.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CN ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OR 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construct ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded cons ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...
Seller: Otinus Polska Sp. z o.o.
The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...
Seller: TechModus LT
Nitrogen Furnace nitrogen furnace Pit furnace, top condition. 50kW ele Max T. 950°C Anealing in hydrogen, nitrogen atmospere Batch size 800x1000mm run only for tests and start of production similar possible furnace REY, Naberther, CFI, SAIREM, SOLO, ALD, ECM, BMI, CERIC WISTRA, ELTI, ECM, NAGAT SAT, SAFED, SERTHEL, SLFI, MORGAN, OTTO JUNKER, CIEFFE Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammh ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call us to find out more. Fiber Laser Cutter FLV-3015-OE 3kW / VF1530-3000W Technical parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm - Maximum speed: 60000 mm/min - Maximum acceleration: 0.7 G - Maximum load: 1200 kg - Power: 3.0 kW - Power requirement: 24.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting thickness - Black steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Construction - Construction type: welded - Number of support legs: 8 - ...
Seller: M&S EXPORT Lippstadt
Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1200 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.
Seller: M&S EXPORT Lippstadt
Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1060 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.
Seller: M&S EXPORT Lippstadt
Description: Type : Oil transformer Finish : Hermetic Make : SGB Year of manufacture : 2016 Condition : New Rated Power : 4200 KVA Medium voltage : 22KV +- 2X 2.5% Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Type of cooling : ONAN Gross vehicle weight : 9030 kg Weight of oil : 1940 kg DIALA S4 ZX-I Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.
Seller: Otinus Polska Sp. z o.o.
Fiber Tube Laser with Automatic Wire Feed FLV-TA-6024 3kW Technical Parameters - Maximum profile height: 240 mm - Maximum profile length: 6000 mm - X- and Y-axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy of X and Y axis: ±0.03 mm - Maximum Acceleration: 0.0G - Power: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Depth: - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminum: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Construction The machine is very stable thanks to the welded construction. High-speed movement of the head with high precision is ensured by Japanese Fuji servo drives. Automatic lubrication system for axle ...
• Non-EX version • Drum fully perforated with mixing paddles • Drum useful volume 331 litres, drum diam. 1,450 mm, opening diam. 550 mm • Batch size 79-265 kg (filling volume 30-100%, density 0.8 kg/dm3) • Volume flow 2,000-4,500 m3/h • 6 spray nozzles with peristaltic pump, spray rate 250-1050 g/min, • Drum drive Motor power 1.5 kW, speed 1.5-13 rpm • Antifreeze heater 68.1 kW • Dehumidification in 2 stages, cooling capacity 75.2 kW, aftercooler 24.3 kW, residual moisture at outlet 2 g/kg • Humidification Preheater heating capacity 53 kW • Main heater Heating capacity 140 kW, air temperature at outlet +90° C • Supply air fan max. volume flow 4,500 m3/h, motor power 7.5 kW • Supply air filter 3 stages M6, F9, H13 • Exhaust air fan max. volumetric flow 4,500 m3/h, motor power 22 kW • Exhaust air filter H13 • Cleaning nozzles Drum outside 2 x ...
Seller: Theodor Eberlei GmbH & Co.KG
Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: SITI SAT drive technology, type MNHL 20/2-2743-MS -Speeds: approx. 51 rpm i= 27.4 -Power: 0.37 kW / 1400 rpm -Protection class: IP55 -Hollow shaft: Ø mm -Dimensions: 430/195/H150 mm -Weight: 10.1 kg
Seller: RM-Business-Services
Metrohm 907 Titrando with 804 Ti Stand dynamic (DET); monotonous (MET), endpoint (SET) enzymatic and ph-Sat, as well as Karl Fischer (KF) Titrations,Measurement with ion-selective electrodes "iTrode",Dosing function with monitoring, Complies with FDA/21 CFR 4 MSD ports, USB Dosino 800; 10 ml ; 804 Ti Stand
Seller: M&S EXPORT Lippstadt
Description: Type : Oil Transformer Variation : Hermetic Make : CG Power System IRELAND LTD. Year of construction : 2016 Condition : New Nominal power : 3200 KVA Medium voltage : 22 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : KNAN Total weight : 7366 Kg Oil weight : 1760 Kg Mineral OIL Elster Length: Width: Height: Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available Mon to Sat 8 a.m. to 10 p.m.
Seller: Otinus Polska Sp. z o.o.
Key data: 3000 W, 1500 , 3000
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinu ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 500 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for si ...
Seller: Otinus Polska Sp. z o.o.
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 progr ...
used
Seller: Palm Brokers
1 x W&H Matador S1A perforating machine for flat- and satchel bags, Bag width : 70 - 380 mm Bag length : 220 - 600 mm Satchel : max. 70 mm Paper roll width: max. 1060 mm Roll diameter : 1000 mm Year : 1970 - with : 4 colour W&H QMS flexo printing unit Speed: max. . 800 Bags/min With : Photocell for pree-printed rolls. With - Bag width - flat. 132mm, 158mm, 189mm, 238mm, 265mm. With - Bag width satchel. 122mm, 151mm, 180mm. Gearwheels . 470mm, 520mm, 540mm, 640mm, 760mm, 860mm. Still in operation: Yes Available: October - 08
Seller: Winter Holztechnik GmbH
Technische Daten: - Kettenbreite 350 mm - Schnitthöhe 10 - 155 mm - max. Sägeblatt FI 405 mm - min. Sägeblatt FI 355 mm - Sägeblattbohrung FI 80 mm - min. Werkstücklänge 740 mm - Arbeitshöhe 745 mm - Drehzahl 2600 Upm. - Vorschub 2,5 - 24 m/min. - Motor Sägewelle 55 kW - Motor Vorschub 2,2 kW - Gesamtanschluss 57,2 kW - Digitalanzeige für Zufuhrgeschwindigkeit - Sägebüchse mit einem Satz Flanschringe - Rückschlagsicherung - automatisches Schmiersystem - automatischer Stern-Dreieckschalter - Einlaufrollenbahn Länge 1500 mm - Auslaufrollenbahn Länge 1500 mm - Absaugstutzen 2 x FI 150 mm - Transport Abmessungen L=2100, B=1900, H=1980 mm - Abmessungen mit Ein- und Auslaufrollenbahn L=4460, B=1780, H=1880 mm - Gewicht 3500 kg - CE-Ausführung
used
Seller: Palm Brokers
Producer : Windmöller & Hölscher ( in production in Norway ) Windmöller & Hölscher flat- and satchel paper bag machine Type : Matador 31 Bag width : 50 - 310 mm. Cutting length : 120 - 650 mm. With : 4 colour flexo printing ( W&H QMS 945 - print width 800 mm.) Year : approx. 1968 Still in operation: Yes Available: now
Seller: Die fliegende Käserei
Manifold System Satorius with 3 stainless steal funnel (100ml) for microbiological research
Seller: Winter Holztechnik GmbH
Technische Daten: - Kettenbreite 350 mm - Schnitthöhe 10 - 170 mm - max. Sägeblatt FI 505 mm - min. Sägeblatt FI 355 mm - Sägeblattbohrung FI 80 mm - min. Werkstücklänge 740 mm - Arbeitshöhe 745 mm - Drehzahl 2600 Upm. - Vorschub 2,5 - 24 m/min. - Motor Sägewelle 75 kW - Motor Vorschub 2,2 kW - Gesamtanschluss 77,2 kW - Digitalanzeige für Zufuhrgeschwindigkeit - Sägebüchse mit einem Satz Flanschringe - Rückschlagsicherung - automatisches Schmiersystem - automatischer Stern-Dreieckschalter - Einlaufrollenbahn Länge 1500 mm - Auslaufrollenbahn Länge 1500 mm - Absaugstutzen 2 x FI 150 mm - Transport Abmessungen L=2100, B=1900, H=1980 mm - Abmessungen mit Ein- und Auslaufrollenbahn L=4460, B=1780, H=1880 mm - Gewicht 3500 kg - CE-Ausführung
used
Seller: Palm Brokers
Holweg RS 21 flat- and satchel bag machine: Year : 1974 Bag width : 70 - 380 mm Tube length : 145 - 660 mm Reel width : 150 - 900 mm Paper : 30 - 125 g/m2 Speed : 700 bags/min With : Photocell for pre-printed rolls. Still in operation: Yes Available: now
Seller: TOTAL-REGAL, Angelika Braun
7 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -8 Stand / 28 bars -Traverse length 2.70 m -Load per level 2.0 tonnes -Shelf height: 3,00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 250 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commerci ...
Seller: Winter Holztechnik GmbH
Technische Daten: - max Arbeitsbreite 500 mm - Kettenbreite 500 mm - max. Schnitthöhe 170 mm - min. Schnitthöhe 10 mm - min. Werkstücklänge 740 mm - max. Sägeblatt ø 505 mm - min. Sägeblatt ø 405 mm - Bohrung Sägeblatt ø 80 mm - Spindel ø 60 mm ohne Büchse - Drehzahl 2600 Upm. - Vorschub 2,5 - 24 m/min. - Motor Sägewelle 75 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 81 kW - Spannung 400 V / 50 Hz - Digitalanzeige für Zufuhrgeschwindigkeit - schwenkbares Bedienpult in Augenhöhe - elektrisch angetriebenen Einzugswalze im Tisch mit pneumatisch getakteter Oberdruckwalze - optische Holzerkennung über Lichtschranke - elektrisch angetriebene Auszugswalze im Auslauf - schwere Rollenbahn im Ein- und Auslauf - harte chromierte Oberfläche der Transportkette - Sägebüchse mit einem Satz Flanschringe - Rückschlagsicherung - automatisches Schmiers ...
Seller: TOTAL-REGAL, Angelika Braun
3 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -4 Stand / 6 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial custom ...
Seller: Winter Holztechnik GmbH
Technische Daten: - Kettenbreite 350 mm - Schnitthöhe 10 - 135 mm - max. Sägeblatt FI 405 mm - min. Sägeblatt FI 355 mm - Sägeblattbohrung FI 80 mm - min. Werkstücklänge 740 mm - Arbeitshöhe 745 mm - Drehzahl 2600 Upm. - Vorschub 2,5 - 24 m/min. - Motor Sägewelle 37 kW - Motor Vorschub 2,2 kW - Gesamtanschluss 39,2 kW - Digitalanzeige für Zufuhrgeschwindigkeit - Sägebüchse mit einem Satz Flanschringe - Rückschlagsicherung - automatisches Schmiersystem - automatischer Stern-Dreieckschalter - Einlaufrollenbahn Länge 1500 mm - Auslaufrollenbahn Länge 1500 mm - Absaugstutzen 2 x FI 150 mm - Transport Abmessungen L=2100, B=1900, H=1980 mm - Abmessungen mit Ein- und Auslaufrollenbahn L=4460, B=1780, H=1880 mm - Gewicht 3500 kg - CE-Ausführung
Seller: Editec AB
We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB
Seller: Winter Holztechnik GmbH
Technische Daten: - Hobelbreite 18 - 200 mm - Hobelhöhe 8 - 120 mm - 4 Spindeln - Spindel FI 40 mm - Drehzahl 6000 U/min - Vorschubgeschwindigkeit stufenlos 6 - 24 m/min - Abrichtwelle, unten max. Werkzeug FI 145 mm - Rechte Vertikalwelle max. Werkzeug FI 180 mm - Linke Vertikalwelle max. Werkzeug FI 180 mm - Dickenwelle, oben max. Werkzeug FI 180 mm Spindelfolge: 1. unten 5,5 kW 2. rechte vertikal 4,0 kW 3. linke vertikal 4,0 kW 4. oben 5,5 kW - Motor Vorschub 3,0 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 23,1 kW - Aufgabetischlänge 1600 mm - Satz Vorschubwalzen FI 140 x 35 x 50 mm, FI 140 x 35 x 20 mm, FI 140 x 35 x 16 mm - Druckluftanschluss max. 6 bar - Absaugstutzen 4 x 130 mm - Abmessungen L=3650, B=1635, H=1730 mm - Gewicht 3000 kg inklusive: - hart verchromte Tische - CE Norm, TÜV Rheinland - motorisch angetriebene Walzen im Tisch - pneumatischer Andruck der ...
Seller: Winter Holztechnik GmbH
Technische Daten: - Hobelbreite 20 - 230 mm - Hobelhöhe 8 - 160 mm - 5 Spindeln - Spindel FI 40 mm - Drehzahl 6000 U/min - Vorschubgeschwindigkeit stufenlos 5 - 30 m/min - Abrichtwelle, unten max. Werkzeug FI 145 mm - Rechte Vertikalwelle max. Werkzeug FI 200 mm - Linke Vertikalwelle max. Werkzeug FI 200 mm - Dickenwelle, oben max. Werkzeug FI 200 mm - 2. untere Welle max. Werkzeug FI 200 mm Spindelfolge: 1. unten 7,5 kW 2. rechte vertikal 5,5 kW 3. linke vertikal 5,5 kW 4. oben 7,5 kW 5. untern 7,5 kW - Motor Vorschub 3,0 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 37,6 kW - Aufgabetischlänge 2000 mm - Satz Vorschubwalzen FI 140 x 35 x 50 mm, FI 140 x 35 x 20 mm, FI 140 x 35 x 16 mm - Druckluftanschluss max. 6 bar - Absaugstutzen 5 x 150 mm - Abmessungen L=3760, B=1730, H=1750 mm - Gewicht 4500 kg INKLUSIVE: - hart verchromte Tische - CE Norm, TÜV Rheinland - pneumati ...
Seller: TOTAL-REGAL, Angelika Braun
14 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -15 Stand / 28 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU countries (Austria, Italy etc.) with appropriate VAT number (E.g. AT/IT) will each receive a net ...
Seller: TOTAL-REGAL, Angelika Braun
28 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -29 Stand / 56 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU c ...
Seller: TOTAL-REGAL, Angelika Braun
56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 112 traverses -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU c ...
Seller: TOTAL-REGAL, Angelika Braun
3 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -4 Stand / 6 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.50 m, depth 1,10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 150 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU countries ...
