sandwich used for sale

This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine.

This 4-axis San Rocco MEC-4 boring machine was manufactured in 1995. It includes a universal head, sleeve reinforcement, and a spraymist control unit. Accompanied by approximately 60/70 drill bits for deep drilling of various diameters, this machine offers robust capabilities for precise boring tasks. Consider the opportunity to buy this San Rocco MEC-4 boring machine. Contact us for further details regarding this machine.

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

San Cassiano SE80 Spiral mixer Removable bowl spiral mixer, 80Kg capacity bowls, two bowls, timer settings, forward / reverse, 3Ph

T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï» ¿ï»¿ï»¿ï»¿, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark

ICMA SAN GIORGIO TWIN SCREW EXTRUSION LINE, used for PE PP, Forced feeding hopper with frame, Extruder with segmented screws 2x140 mm. 32 LD, 200 Kw drive, n.1 vacuum degassing pump, hydraulic screenchanger, Water ring pelletizer (year 2016), drying centrifuge in stainless steel, Constructed in 1990, Offered AS IS WHERE IS, conditions: used

ICMA SAN GIORGIO TWIN SCREW EXTRUDER CO-ROTATING, used for elastomers TPE TPU SBS,.., Extruder with co-rotating segmented screws 2 x 140 mm 36 L/D, Screws speed 178 rpm, Reinforced gearbox, Siemens 430 kW drive, degassing pump, semi-automatic hydraulic screenchanger, hydraulic pack, Dry pelletizing unit, Electric panel overhauled in 2015, added touch control, Constructed in 1997, CE compliance declaration, electric drawings.

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck, faceplate, faceplate chuck, facing lathe chuck -Manufacturer: SAN OU, K72 series four-jaw faceplate chuck type D Ø 300 mm -Passage: Ø 95 mm -Bolt circle: Ø 135 mm -Mounting: Mounting: Short taper 6 / cone 103 - 106 mm short taper flange with Camlock fastening -Dimensions: Ø300 x 190 mm -Weight: 40 kg

Description TWIN SCREW GRANULATION LINE Twin screw co-rotating extruder diameter 140 L/D 32 Feeder silo, forced feeder with dosing units, control panel Celetric Water ring peletizer Forties T1000 year 2016 Hydraulic screen changer Rectangular vibrating screen

Description TWIN SCREW GRANULATION LINE Twin screw co-rotating extruder diameter 140 L/D 32 Feeder silo, forced feeder with control panel Celetric 2012 Dosing system for side feeder Ergomec 2012 Water ring peletizer Filtech GRO 1000 Hydraulic screen changer Rectangular vibrating screen

ICMA S.GIORGIO TWIN SCREW EXTRUDER, for PE PP PS PC ABS, Barrel with 2 x 110 mm co-rotating screws, n.1 vacuum degassing pump, semi-automatic hydraulic screenchanger (possible fully automatic screenchanger), no cuttins, but we can supply STRAND or WATER RING or UNDERWATER, Electric cabinet

Type: SE 200 Serial number: 12338 Year of construction: 1999 Bowl: 320 litres, max 200 kg Mixing: 2 speeds Power: 3 x 380V, 50Hz, 12kW Dimensions: 1800 x 1400 x 2150 mm Weight: 1350 kg With movable mixing bowl and temperature indicator

Manufacturer: Sandingmaster Breitbandschleifmaschine , Type: SA-3202-1100, Year: 1996, Monting of the machine: Walze/Kombi, Sanding width mm: 1100, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 2150-1150, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : yes, Elektronische Tastung mm: yes, Frequency control of belts: Band 2, Längsschleifaggregate: 2, Rubber roller: yes, Steel roller: Gummi ca.80 shore, Band 1 Leistung kW : ca.10, Belt 1 shoe unit: yes, Band 2 Leistung kW : ca.10, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 8-15, Transportbandantrieb kW: 1,5, Vacuum table: yes, Segment sanding shoe: yes, Weight in kg: 2500, Year :1996

Manufacturer: Sandingmaster, Type: SCSB 2 - 900, Year: 1980, Monting of the machine: Walze / Schuh, Sanding width mm: 900, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 930 x 1920, Band 1 Leistung kW : 11, Band 2 Leistung kW : 11, Year :1980

A two-unit sanding machine Sandingmaster is available. Working width: 1100mm, max. workpiece width: 1000mm, max. workpiece height: 150mm, sanding belt dimensions X/Y: 1130mm/1900mm, feed: 14m/min. Machine dimensions X/Y/Z: approx. 3150mm/1500mm/1900mm, weight: approx. 2500kg. Including approximately 50 sanding belts with different crownings. Documentation available. An on-site inspection is possible.

ID3763 Sandvik Pantera DP1100i Year of construction 2014 approx. 11.060 hours/hours Blasting hole drill rig, with rod changer, cab with safety grille, radio, roller blinds for cab windows, TIMi – rig alignment instrument, hydraulic tail supports, central lubrication system, all servicing carried out by Sandvik, good condition, the last hammer service was carried out 300 operating hours ago & the last safety inspection in January 2026. Blast hole drilling rig, with rod changer, cab with protective grille, radio, roller blinds for cabin windows, TIMi – carriage alignment instrument, hydr. Bottom supports at the rear, central lubrication system, all service done by Sandvik, good condition, the last hammer service was carried out 300 hours ago & the last safety inspection in January 2026

Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...

Fan filter, fan line, air cooler, control cabinet fan, filter fan -Manufacturer ebm Santenberg: Filter fan from CNC machining center Santenberg GTC S 2 -Engine: Type ebm W2G130-AA33-26 -Voltage: 24V/14/16W -Dimensions: 255/255/H115 mm -Weight: 1.4 kg

Sander Vario Master 9480 strapping machine Manufacturer: Sander  Type: Vario Master  Model: 9480  Type: Vertical Strapping Machine  Operating voltage: 400 V Power: 2 kW Control voltage: 24 V

amount: 1 STK The tool shown in the illustration is a Sandvik Coromant T-Max Q-Cut head for grooving, identified more precisely by part number 570-40R 1513-09-50. Manufacturer: Sandvik Coromant Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inlet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

Lots of monobloc boring bars Rock drills and extensions from tunnelling unused and used - Diameter: 23 to 83 mm - Length: 500 mm - 5600 mm Manufacturer: ROCBO, SANDVIK, BÖHLERIT u.a. Cone Boring Rods, Monobloc Boring Rods and Extension Boring Bars The drills come from the bearing dissolution of a tunnel construction company and are mostly as good as new. See list for details Changes and errors in technical data, information and prices as well as prior sale. Number Description Description Addendum 3 cone boring bars length approx. 4,000 mm inserting end approx. 25x159 mm, as good as new 1 cone boring bar length approx. 5,000 mm Inserting end approx. 22x82 mm, as good as new 2 cone boring bars length approx. 1,000 mm Inserting end approx. 22x82 mm, as good as new 25 cone boring bars length approx. 2,400 mm inserting end approx. 25x159 mm, as good as new 18 c ...

Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact

Gnocchi factory 1. Cooking kettle Glass pro3, 500 l, tilting, mixing 2. Bin hoist for 200 bins feeding the former 3. Former Sandore NF 100c 8.5 kw 4. Feeding conveyor for vibrating Tunel 5. Vibration tunnel Sarp str 410 4.7 kw 6. Waste and water separator Sarp Filtro 7. Feeding conveyor for multi head weightier, z type 8. Platform for weigher 5000x5000 mm 9. 10 head weigher BVBA 01AAH-WS 10. Packer Tiromat BL-150 ET422N 11. Ready product conveyor

Sanyo MPR-311D(H) Medication Refrigerator 340l Safe, worry-free, cool storage of valuable medical products Efficient temperature control A thermistor sensor and electronic temperature control ensure that that the setpoint temperature is maintained. Even if the door is opened and closed every now and then, the fans ensure rapid temperature compensation, to ensure highly reliable and stable storage conditions, on which the outside temperature has no influence. Equipped with digital temperature display A clear digital temperature display allows for quick visual inspection to the current operating temperature. To simplify visual temperature control, the temperature is measured in 1°C increments for a temperature range of 0°C to +15°C. Fan forced circulating air Thanks to the fan-forced recirculation system, the temperature is evenly distributed throughout the chamb ...

10 chisels to hydraulic dismantling hammer Sandvik Rammer size G100 and G120. 3 chisels are new 7 chisels are freshly forged.

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S15 B1A1WABS000 PUMP

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S15 B1INWABS000 PUMP

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S15 B1INWABS000 PUMP

Air Operated Double Diaphragm Pump with Top Suction Lift Made by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Made by SANDPIPER

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S1F B1ABWABS600 PUMP

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S1F B1ABWABS600 PUMP

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S1F B1ABWANS000 PUMP

USED AIR-OPERATED DOUBLE-DIAPHRAGM SANDPIPER S1F B1ABWANS000 PUMP

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

Pos. 9749.13 - 1 MAYER type Relanit 3.2 II, gauge 28, diameter 30, jersey open knit, 2640 needles, 96 feeders, lycra, 3+1 tracks Pos. 9750.11 - 1 MAYER type Relanit 4, gauge 28, diameter 30, jersey tubular knit, 2640 needles, 96 feeders, 3+1 tracks Pos. 9751.18 - 1 MAYER type Relanit 4, gauge 24 installed and spare cylinder gauge 28, diameter 30, jersey tubular knit, 2268 needles, 96 feeders, 3+1 tracks Pos. 9752.1 - 1 MAYER type MV4 II, gauge 20 installed and spare cylinders gauge 24 and 28, diameter 30, jersey tubular knit, 1872 needles, 96 feeders, 4 tracks Pos. 9753.8 - 1 MAYER type FLF, gauge 14, diameter 30, rib tubular knit, 2 x 1320 needles, 44 feeders, lycra, 1/1 tracks Pos. 9754.5 - 1 MAYER type MLBF, gauge 22, diameter 30, plush tubular knit, 2068 needles, 96 feeders, 4 tracks Pos. 9755.17 - 1 SANTONI type Zenit SV, gauge 28, diameter 34, jersey open knit, 29 ...

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

Air Operated Double Diaphragm Pump with Top Suction Lift Manufactured by SANDPIPER

1 SANTONI seamless circular knitting machine type SM8-EVO4, cylinder diameter 16", 1216 needles, gauge 24, year 2006, creel for 24 bobbins. This machine was bought for development and has not more than 300 real working hours

Sandwich Shapes Bread Mold Box Mold Toast Mold External dimensions: 56x30cm Internal dimensions: 12cm wide 28,5cm Long 11cm High

Santasolo Gearbox Part No.: 2KC110 The spare part is in good condition nevertheless, this is a used items, which has or may show signs of wear.

PLC, PC, control, position controller, Hitachi Seiki, HC400 -The PC comes: from a Hitachi Seiki HC400 machining center -Manufacturer: Sanyo Denki -PC type: APC-9-203-1 -Dimensions: 300/150/H160 mm -Weight: 3.6 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Manufacturer: Sandvik Coromant R391.B03R-40F53 A -Socket: Ø 40 mm -Boring tool holder: 16 x 8 mm -Tool: Ø 435 mm -Weight: 6.1 kg

Tool holder, milling holder, collet holder, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Sandvik Coromant milling holder SK45 -Type: 390.140-45 50 027 -Dimension: O83 x 140 mm -Weight: 1.7 kg

Hydraulic press, oil hydraulic press, shear press -Manufacturer: Santenberg, hydraulic shear press -Hydraulic unit: HyPneu 0.75 kW / 100 bar -Individual components: see photos -Dimensions: 1190/910/H1670 mm -Weight: 262 kg