sack kiesselbach used for sale

-Hobbing press -Make: Sack & Kiesselbach -Type: 500 Mp -Mach.No: 30407 -Capacity: 500 tons -Width between uprights : 420 -Daylight: 370 -Stroke: 340 -Clamping surface : Ø 500 -Closing speed: 100 mm/s -Pressing speed : 1.8 mm/s -Opening speed: 200 mm/s -Power -Dimension: -Weight 3.25 + .330 -L x W x H: 2.245 x 1.8 x 1.17

Key data: 1250 t

For sale is a sinking press Sack + Kiesselbach pressure 1250 tons.

Qty. 2 Second-hand billet automatic stacker including packaging unit Mfc.: Mannesmann Demag Sack Each unit consist of: Layer removing device transportation of billet layer within the area of stacking table Qty. 5 Stacking cars Driveway approx.: 600 mm Transporting speed: 0.1 m/sec. Stop device to remove the billet layers in front of the stacking lift table Qty. 5 Stop levers Bearing blocks Tension rods Pneumatic cylinder Stacking device for stacking of transferred layers to the package Stacking table Stroke: 400 mm Package dimensions: 300 ? 600 x 200 ? 400 mm - W x H Package weight: max. 6000 kg

press capacity: 10.000 kN; ready for operation

Press capacity: 10.000 kN Height: 480 mm Stroke: 350 mm Working height: 1,090 mm

Combined packaging machine for kiwi fruit (flow pack), lemons / oranges (nets), peppers (flow pack) also in a traffic light system

Sack copy frame 1990 850 x 650 mm available immediately located Germany

<br>Machine completely renovated; Pipe length: 56-164 cm Tube width: 35-70 cm Lower width: 7.7 - 22 cm 1 or 2-valve units Gravel-press-Gértel Option: S-compression G'rtel, Icoma<br><br><br>br>Verf Gbar: now

<br>Tube length: 48-140 cm Pipe width: 30-70 cm Lower width 7-16 cm 1 valve Lower Patch Unit 1 or 2 color at the bottom patch Gravel presses Option: S-Presses, Icoma<br><br>Still in operation: Yes<br>Verf Gbar: now

<br>With near head UNION SPECIAL Maximum sack length: 120 cm<br><br><br><br>Verf Gbar: now

With stitching head UNION SPEZIAL Maximum sack length: 120 cm Available: now

Valve sack filling-machine, system air packer. With this machine you can fill all mealy, powdery, grainy and lumpy bulk articles - even difficult kind- with pour weights from 0,1 kg/l until 2 kg/ l and filling weights from 10 - 50 kg in paper and plastic valve sacks or combination of both materials. The machine is in a very good state. You can also get the entire system with all components you need.

Tube length: 48 - 140 cm Tube width: 30 - 70 cm Bottom width 7 - 16 cm 1 valve Bottom patch unit 1 or 2 colour on bottom patch Shingle pressing Option: S-Pressing, Icoma Still in operation: Yes Available: now

Machine completely reconditioned; Tube length: 56-164 cm Tube width: 35 - 70 cm Bottom width: 7,7 - 22 cm 1 or 2 valve units Shingle pressing belt Option: S-Pressing belt, Icoma Available: now

Rotary feeder, modern bottom opening station, CCS control system, 2 valve units, bottom patch with 2 colour tail end printers

Speed: 18m/min, heating output: 1.35kW, length: 2750mm, width: 976mm, weight: 650kg, including documentation, spare parts and accessories.

Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann

Semi-automatic bag emptying system with attachment filter Infastaub; optionally associated powder conveyor system.

For sale is this hand truck for the transport of barrels. Condition from the pictures. --------------------- For sale is this hand truck for transporting barrels. Condition can be taken from the pictures.

We offer one second hand sewing machine for the manufacture of industial sacks, type 1014/1, Icoma, Germany, Tube width 20-80 cm, Tube length 55-150 cm, with cutter, sewing head from Union Special, machine ready for test production, one spare sewing head could be given with the machine

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Y&J:1984, 3 silos, 800 mm diameter x 1400 mm total height, with manhole lids, 3 vibration discharge floors; Inlet: 800 mm, outlet: 168 mm, height 570 mm, 1 suction filter with sack shake, filter area: 2.3 m2, 3 blow-through locks for conveyor system.

BTS-Bag Press With the BTS-Bag Press for waste bags large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the waste volume up to 90%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 90% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x ): 1861 x 1200 x 630 mm Transportation height: 1861 mm Machine weight: 325 kg Cycle time: 20 seconds Noise level: 68 dB Compaction up to: 90%

Gross bagging scale with e = 50 g for open bags with stainless steel double screw feeder 55 - SS (2 x 1.2 kW, for coarse and fine current), one-piece rubber filling nozzle, evaluation unit Speedac 7, pneumatic sack clamp, vent device with 2 vacu probes (swivelling), rietschle vacuum pump and switch cabinet. Air consumption: 30 NL/weighing, amount of aspiration air: 6 m3/min.

Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...

Stainless steel containment system Glove Box with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used, as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178407 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1000 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.4 L oil; 3000/113 rpm 4x Load cells "Fli ...

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Gross bar scale for filling open bags from 10 - 50 kg, with feed paddle screw incl. drive 1.1 kW for coarse and fine current dosing, with pneumatic sack clamp (200 mm) and automatic bag drop, mounted on an elastic stand frame. Last used for the filling of construction chemical products; good condition, last calibration in 2014.

Polystyrene compressor Styropactor NANO | Polystyrene press for polystyrene EPS Polystyrene compressor. Combination of shredder and press for polystyrene, EPS polystyrene beetle NANO 1-phase Commodity code 42020 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 10-15 kg/h Throughput in fish crates with lid measured 650 grams per piece and about 800x400x220mm): 10-15 boxes/pc Wet boxes: YES Stainless steel version: YES 40'HC container YES Mobile version (with wheels): YES Density (after compaction): 200-500 kg/m³ Connection: 1.5kW, 1-phase, 230/110 V, 50-60Hz Insertion opening: 300×490 mm Length: 1850 mm Height: 1400 mm Width: 660 mm KBM Styroverdichter reduce the volume of EPS (STYROPOR) by about 20-40 times with dry and moist material (including fish crates) The NANO is suitable for industrial use and smaller volumes and quantities. Al ...

Used weighing and packaging machine used for packing granules by TÉCNICAS MECÁNICAS ILERDENSES SL. model ILERSAC LBSD. New 2013. TECHNICAL DATA: PRODUCT CHARACTERISTICS: - Product BLACK COAL IN PROSPECT. - Density 340 / 645.16 kg/m3 - Fluidised Yes - Granulometry 30 µm - Sack type PAPER - OPEN BAGS - Bag weight 12 kg - Dimensions of bag 740x500x160mm - Dimensions of CP1 pallet 1200x1000x150 - Maximum pallet height 1800 mm Maximum production of 90 bags/hour CONNECTIONS: - Electrical connection 380V III+N+T 50 Hz - Installed power 12 kW - Control voltage 24 V - Air pressure 6 bar - Air consumption 150 NL/min. - Aspiration 1900 m3/h - 21 m/s Main features: - Programming of reading stability conditions. - Programming of weighing cycle and autocorrection parameters. - Zero variation detection range. - Precision: 5000 homologated divisions. - 50 operating reci ...

Bag opener to open the bag like "Gelber sack", etc. As a stand-alone device usable or as components in E.g. a sorting facility. Capacity: 20-30 cbm Power: ~ 22kW Dimensions: 8000x2350x2700mm Weight: 11t Exhibition machine, condition as new. more data and estimate on request.

High-resolution inkjet printer with many possibilities. For coding and marking absorbent materials such as folding cartons, trays, bags, sacks or individual products up to 8 lines plus graphics and barcodes. Character height from 1.5 to 18 mm Product benefits at a glance High-resolution inkjet printing: 128 individually addressable dots per printhead. Completely free print image design within the text area. Combination of text, logos and barcodes in one printed image. Kortho Image Generating Software for logical image creation on the pc. Unique infrared remote control: no wired connection required. Separate, refillable ink tank with industrial-grade volume. Clean, easy filling with ink during operation. Very low cost per print. Printing costs can be calculated by program. Maintenance reduced to a minimum. No need to rinse with solvent. The advanta ...

Valve sack filling line Two filling heads with automatic bagging line. Control redesigned Siemens S 7 logic in 2013

- Total height: 1000 mm - Turnboard to top edge sack: 900 mm - Base plate / foot: 1000 x 1000 mm Details The rotary device can hold 4 plastic bags (used to accommodate small parts of a injection moulding machine). After reaching a number of pieces (pulse that the bag is full), the device rotates 90°. Equipped with an engine and gearbox, as well as a sensor that triggers every 90°, the control can be adjusted depending on the system, total height up to sack top edge 980 mm, rotation speed 4.5 rpm, via another gear the speed can be adjusted

Plough-charmed PSM 300 / 1 MK Material : Stainless steel Main drive: 7.5 KW Volume: 300 ltr.; Demonstration machine, 5 - 6 operating hours; --> food suitable. --> mixer available at short notice, price VHB. Facilities: - Mixing plant: ploughshares, - 1 knife head, drive: 4 KW; - Sack shakes, material: stainless steel; - Sack container buckle: at the outlet with manually operated rotary flap; - outlet height of the bagging device: 980 mm; - air flushing on the shaft passages; - Stainless steel control cabinet, fully wired -- > ready for operation; - Machine frame with pallet space, made entirely of stainless steel;

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...

Palletizing system for sacks, trays or similar products. Kuka palletizing robot type: KR 180-2 PA Kuka was built in 2004, gripping tool and the recording tape are NEW

Powder filling system for pre-made large bags/sacks with subsequent sealing and/or sewing of the bag/sack. The system includes product feed (screw conveyor), screw feeder with weight feedback, conveyor belts to feed to the heat sealing machine and to the sewing machine. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed and filled into the bag. Then it is manually guided by conveyor belt to the heat-sealing or sewing module and sealed or sewn. - Specifications auger filler: weight range: 10-50kg (when changing the dosing screw) | accuracy: +/-0,5% | max. speed of the machine in neutral: 8 cycles/min | capacity of storage hopper: 100L | power: 380V, 50Hz, 3kW | stainless steel version AISI 304 | machine dimensions: L1150xW1000xH2550mm | weight: 450kg. Specifications screw conveyor: Capacity depending on the product: up to 5m?/h | capacity ...

axis stroke (X,Y,Z): unbegrenzt, 1000, 60 mm Number of spindle head vertical: 10 St. Number of spindles head horizontal: 6 St. milling motor: 4,5 kW CNC-Bearbeitungszentrum zum HAMMER-PREIS! MASTERWOOD TF 100 2.0 Partnership Edition Ausstattung: -------------------------------------- - Bohrkopf mit 16 Bohrern für 5-seitige Bearbeitung - Nutsägeaggregat - Fräsaggregat mit 6-fach-Werkzeugwechsler - inkl. Nutsägeblatt, 2 Diamantfräser, 1 WPL-Schlichtfräser - Vorrüstung für CLAMEX- und Türenpaket - 2 klappbare Rollenbahnen - programmgesteuerte Zentralschmierung -------------------------------------- AKTIONSPREIS 44.990,00 Euro (zzgl. MwSt.)ab Werk -------------------------------------- Fracht, Aufstellung, Einweisung innerhalb Deutschland inklusive 8-stündiger Schulung individuell und vor Ort AKTIONSPREIS 3.000,00 Euro (zzgl. MwSt., Preis bisher 2.582,00 Euro) Die Optionen der Par ...

Vertical weighing and filling system for pre-made large bags/sacks. Suitable for granular products such as seeds, pet food, wood pellets etc. The system includes product feed, automatic weighing unit, conveyor belt and sealing OR sewing module. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed by weight and filled into the bag. The bag is then by conveyor belt to the sealing or sewing module for sealing or sewing. - Specifications: Weight range: up to max. 25kg | max. speed of the machine in neutral: 200 bags/hour | accuracy: ?0.2% FS | power: AC 220V/380V, 50Hz, 2kW | compressed air: 6bar, 0.17 m? | product contact parts are made of AISI 304 stainless steel | dimensions of the system depend on the final layout, can be customized. That machine/system is available in different versions for different packaging sizes and with different pac ...

Technical data Pulper for vacuum batch operation: Year of construction 2016 Operating hours approx. 3,500 hours Total volume pulper 40 m³ Working volume pulper approx. 28 m³ Stock consistency < 15 Material conveying speed from TKF 0.4 m/second Throughput rate up to 3.5 pulper batches per hour Drive power Pulper Hi-Torc drive 440 kW Max. Rotor speed 3,000rpm. Material types: Leached labels from breweries and mineral water bottling plants, wet-strength papers such as tissue production waste, security papers, etc., moisture content approx. 35 - 50%. Beverage carton and other film-coated papers, moisture content approx. 22% on average Kraft papers such as carrier bags, six-pack, sack papers without foil liner, ambient moisture content average 7% Corrugated cardboard waste and clean paper waste, ambient moisture average 7% Throughput calculation example in batch operation with leached label ...

SEKWANG Shot Machinery Co. Ltd SKHSS-4600 PRE-TREATMENT SYSTEM (2006) Including: -Main Pre-treatment system -Main control panels -Conveyor -Compressor -Dust and Fume Collector -Pre Heater -Shot blasting -Vacuum Recovery -Welding Machine -Blower -Mixing room Including an assortment of spare parts : Bearings Chain Belts Manganese Filter Sacks, etc. Make SEKWANG Shot Machinery Co. Ltd Model SKHSS-4600 Year 2006

Rideable on 4 wheels For filling into bags, sacks or buckets. The bag shoulder has a diameter of 23.5 cm. Bags/sacks with a width of/up to 400 mm are processed. Buckets can usually be filled up to 10 kg. The filling process can be carried out in manual or automatic mode. Built-in bagging scale, designed for weighing up to 30 kg

• Weighing range 400 g - 60 kg • Tolerance e=20 g • Weighing terminal type 3030 • Pneumatic bad ejection tilting device • Belt height with base frame (only for weighing belt) 3.05 m • Infeed roller belt, driven, W 580 mm, centre distance 990 mm • Weighing belt W 580 mm, centre distance 1,300 mm • With 4 load cells type SEB4A-HS each max. 75 kg • Outfeed belt, driven, with pneumatic reject device, W 600 mm, centre distance 1,880 mm • With accessories for connection of infeed/outfeed conveyor, sensors, pneumatics • Network interface RJ 45 • Connection 100-240V/50-60Hz • Suitable for e.g. sacks, heavy cartons • Unused