sa 800 used for sale

Saddle Stitcher With brochure function Counter: 1.9 million Connecting Bridge DSF-DSC Duplo LDR , 2017 2 CollationTower Duplo DSC – 10/60, 2020 Cover Feeder Duplo DSF-CFL, 2016 Counter Duplo DKT-K, 2017 Head and foot trimming Duplo DKT-200, 2017 Front Trimmer Duplo DBMS-T, 2017 Stitcher Duplo DBMS-S, 2017 Folder Duplo DBMS-F2, 2017 In production Available: immediately Located: Germany

SANGIACOMO T200 RCE 200T eccentric press was built in 2017 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking, stamping and deep drawing. Its wide range of machining capabilities, combined with a press force of 200 tonnes, makes it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 RCE features an intermediate wheel-pinion gear system. It provides high press force at a reduced nominal speed. As a result, the drive power can be used effectively when operating under high loads. The gears operate in an oil bath, ensuring proper lubrication of the drive components while reducing their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The press also has an overload protection system that protec ...

SANGIACOMO T200 DM-DB 200T eccentric press was built in 2018 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking and stamping. Its wide range of machining capabilities, combined with a press force of 200 tonnes, make it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 DM-DB features a drive system based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution ensures uniform torque transmission, which translates into a smooth working cycle. All drive components are continuously lubricated by a central lubrication system to minimise their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The open side wall enables the feeding of material strip. The press has ...

pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t stroke: 8-80 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 70 mm table surface area: 900x600 mm ram surface: 900x470 mm hole in the table: 450x180 mm dist. between columns - front to rear: 500x350 mm dist. between pillars (front to rear): 788 mm total power requirement: 10 kW weight of the machine ca.: 10 t dimensions of the machine ca.: BxTxH 1600x1200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 350-450 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: BxTxH 1500x1500x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lubrication Pump, Gear Pump Aggragat SAXONIA ASL 0.1 pn: 1.6 MPa Q: 0.1 l/min motor: 0.12 kW 220 / 380 V Dimensions: 270 x 130 x 160 mm

Automatic lubrication, central lubrication unit, gear pump unit with tank SAXONIA 6.3 l/1 - 0.25 A pn: 1.6 MPa tank capacity approx. 6.3 l motor: 60 W 220 / 380 V with approx. 2 m pressure hose and approx. 10 m connection cable ! used, tested ! Dimensions: 430 x 500 x 470 mm

Float switches, level switches, level monitors, level switches SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points immersion depth: 170 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 220 x 110 x 90 mm

Float Switch, Level Switch, Level Monitor, Level Switch SAXONIA SCHWARZENBERG 24 - 250 V 2 Switching Points Immersion Depth: 170 mm Flange Ø 60 mm Float: Brass Level Switch for Central Lubrication ! New !' Dimensions: 220 x 110 x 90 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 170 x 110 x 90 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: white level switch for central lubrication ! New !' Dimensions: 170 x 110 x 90 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG immersion depth: 260 mm 2 switching points flange Ø 50 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 310 x 70 x 50 mm

Float Switch, Level Switch, Level Monitor, Level Switch SAXONIA SCHWARZENBERG Immersion Depth: 260 mm 2 Switching Points Flange Ø 50 mm Float: Plastic, Colour: White Level Switch for Central Lubrication ! New !' Dimensions: 310 x 70 x 50 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG immersion depth: 260 mm 2 switching points flange Ø 50 mm float: brass level switch for central lubrication ! New !' Dimensions: 310 x 70 x 50 mm

Float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG immersion depth: 330 mm 2 switching points flange Ø 50 mm float: plastic, colour: red level switch for central lubrication ! New !' Dimensions: 380 x 70 x 50 mm

Float Switch, Level Switch, Level Monitor, Level Switch SAXONIA SCHWARZENBERG Immersion Depth: 330 mm 2 Switching Points Flange Ø 50 mm Float: Plastic, Colour: White Level Switch for Central Lubrication ! New !' Dimensions: 380 x 70 x 50 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm New ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207629 Diameter: Ø 12.25 mm 420279013 K20 Holder: Ø 32 mm New ! Dimensions: 170 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 Diameter: Ø 15.25 mm 420279016 Holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Holder: Ø 32 mm used, tested ! Dimensions: 180 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207630 without Delta Ground diameter: Ø 15.25 mm 420279016 holder: Ø 32 mm K20 used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Delta Drill with Internal Cooling SANDVIK TM411.5-207569 Diameter: Ø 25.25 mm 420279011 K20 Holder: Ø 32 mm used, tested ! Dimensions: 185 x 32 x 32 mm

Engine Brand: KOMATSU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Dry , ECU Present?: yes , Rated Power: 90 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/komatsu-saa4d107e-3-cpl473 1-new/719, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 467 kg, Type number: SAA4D107E-3 CPL4731

Delta Drill with Internal Cooling SANDVIK TM411.5-207628 Diameter: Ø 10.25 mm 420279012 K20 Holder: Ø 32 mm New ! Dimensions: 160 x 32 x 32 mm

Engine Brand: KOMATSU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Dry , ECU Present?: yes , Rated Power: 90 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/komatsu-saa4d107e-3-cpl473 1-new/353, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: SAA4D107E-3 CPL4731; Transport weight [kg]: 466

Engine Brand: KOMATSU, Conditie: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/catalog/product/view/id/219503, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: SAA6D140E-6

Engine Brand: KOMATSU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Dry , ECU Present?: yes , Rated Power: 90 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/komatsu-saa4d107e-3-cpl473 1-new/303, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: SAA4D107E-3 CPL4731; Transport weight [kg]: 468

Press brake manufactured in 2004. This Salvagnini Performer / P2 features a tool set in good condition considering its age, with one defective threading segment that does not impede production. The upper edge cutter has been replaced. If you are looking to get high-quality bending capabilities, consider the Salvagnini Performer / P2 machine we have for sale. Contact us for further details.

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-f ...

Model SAHM 411E 40 winding units Parallel winding machine for the discontinuous winding of copper strip For bandwidth from 0.5 - 25mm Spool weights up to 100 kg Spool diameter max. 400mm Winding width infinitely adjustable from 10mm to 310mm Speed ​​up to 200m/min (depending on spool diameter) Thread tension range adjustable from 35 to 1350 cN(g) Construction: 4 sub-machines, one-sided design with 9 winding heads each 1 dividing machine, one-sided design with 4 winding heads each Find more here - .ucymachines/ Contact us at - sales@ucymachines

2011 Satronik DHDS-5500 Plasma cutting device: Table size 4700X13000mm Useful cutting area: 4000X12000mm Program language: G kodos Topaz Cutting range: Lv2-Lv30mm Angle cut: up to Lv25mm High speed:19000mm/perc/MIN Find more here - .ucymachines/ Contact us at - sales@ucymachines

2000 Sato Elektronik SATRONIK Flame cutting machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

2013 SAR/SEPRO SR 5X-35HL S5 TRANS Injection robot Machine where functional before conservation, obsolete robot version, retrofit could not be done. Find more here - .ucymachines/ Contact us at - sales@ucymachines