rubber mixer used for sale

Key data: 3000 kN, 762 mm, 200 °C

Condition: Factory Rebuilt Model: 3000kN BIPEL Press Application: Compression Moulding Mode of Operation: Manual and Semi-Auto Frame structure: Steel plate frame Cylinder type : Double acting Push back cylinder(s) : Pressing force kN: 3000 Pull back force at circuit pressure kN: 300 Operating height mm : 820 Stroke mm : 610 Daylight between Tables mm : 1205 Table size L -R mm : 785 F-B mm : 890 Opening speed mm/sec: 200 Pressing speed mm/sec:  ...

Key data: 3000 kN

Bed Size: Left to Right 785mm 30 1⁄2 in Front to Back 890mm 35 in Daylight Between Tables 1206mm 47 1⁄2 in Daylight Between Heated Platens 841mm 33 1⁄8 in Heated Platen Sizes(Up To) 760mm x 610mm 28″x24″ Max Working Platen Temperature 220°C 428F Main Ram Stroke(Up To) 610mm 24 in Hydraulic Circuit Pressure 210 Bar 3000 PSI Main Ram Pressing Force 305 T 300 Ton Maximum Pummel Diameter 102mm 4 in Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

General SKU063S235 MakeScheer &: Cie TypeHSG400 No.21057927 Year of construction1990 Mounted on framecheck Main Features Motor22 KW Inlet diameter200 mm Width400 mm Specified Features - Pelletiser Motor22 KW, 380/660 Volt General LocationBarneveld Mounted on wheelscheck Floorspace1,0x1,6 M Total height1,7 M Weight1200 KGRubberPlastic & polymersDiscountPelletisersAnimal feedScheer & CieIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersDiscountMills > PelletisersIndustries > Food & Feed > Animal feedBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU004K022 MakeKraftanlagen Heidelberg LocationBarneveld TypeST-350/6D Main Features Motor180 KW Inlet diameter350 mm L/D6 Specified Features - Single screw extruder Single screw extruder:Pin extruder: Screw diameter350 mm L/D6 With jacketcheck DC-motor180 kW (400 V) + 53,7 kW (400 V) Inlet350 x 285 mm Screw can be heatedcheck MaterialMild steel With jacketcheck General No.91.02 4295916 Year of construction1991 Without switchgearcheck Floorspace5,5 x 1,7 m Total height2,0 m Weight11.000 kg Extra Specifications- With die head for 167 strands - With die face cutter - Extruder can be used for PVCRubberPlastic & polymersSingle screw extrudersDiscountPlastic & rubberNew arrivalsHeidelberg KrafIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersExtruders > Single screw extrudersDiscountIndustries > Recycling > Plastic & rubberNew arrivalsB ...

An injection molding machine Maplan for elastomers requiring repair is available. Design: hydraulic vertical press, hydraulic oil type: ISO VH 46 HLP, hydraulic oil filling quantity: approx. 600l, max. hydraulic pressure: 250bar, heating cartridge diameter: 25mm, insulation plate thickness: 14mm, max. operating temperature: 250°C, L/D ratio: 12:1, max. back pressure: 400bar, max. stroke: 260mm, vacuum pump capacity: 63m³/h, weight: approx. 17500kg, control system: B&R PLC. The temperature control units and the hydraulic clamping system have failed. Documentation available. An on-site inspection is possible.

0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg Condition: used, Specification: MDR Rheometer - second-hand for measuring the curing of rubber compounds with constant elongation test functions - Sealed biconical matrices - Measurement of reaction torque with low friction - Excellent temperature stability and control - Repeatable and reproducible data - Measures dynamic properties power - Measurements of curing under almost real isothermal conditions - Excellent test sensitivity to mixing errors - Limited influence of the operator - Suitable for quality control or research and development - enterprise software - Sample cutter with constant volume Technical data - Testing standards: ASTM D5289 and ISO 6502 - Temperature: ambient up to 200°C (392°F), optional 230°C (446°F) - Frequency: 1,667 Hz (100 CPM) - Elongation: 0.2°, 0.5° (standard) ...

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power:  ...

clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power:  ...

clamping force: -- kN injection volume: -- cm³ screw diameter: -- mm platen size: -- mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising 3x machines, model SAD 114/30 - Year of manufacture: 1999 - Problems with the control system 1x machine, model Super AD 76/15 - Year of manufacture: 2006 - Problems with the control system There are 3 machines built in 1999 and 1 machine built in 2006 available. The price is per unit. If you purchase several units a package price can be arranged. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 120 kN

Mohrtek injection press, vertical loadable, horizontal pressing machine. please contact for more information

clamping force: 350 kN injection volume: 170 cm³ screw diameter: 36 mm platen size: 380 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 350 kN - Platen size: 380 x 300 mm - Heating power of the plates: 6 kW - Clamping/opening stroke: 200 mm - Clearance between the plates: 250 mm - Clamping direction: from below Injection unit: - Pressure: 1,050 kg/cm² - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Max. screw speed: 30–110 rpm - Metering stroke: 165 mm - Injection: from above - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: 11 kW - Hydraulic motor power: 10 kW - Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm - Weight approx.: 3,000 kg The data for this ad was created with ModulMWS - the  ...

Inv. Num. : 9266 Type: DUAL BATCH 40 Producer: Ecoenerg Created: 2022 Parameters: Weight of one batch: 2 x 50 kg One cycle: 4-6 min

Desma Vertical Injection Moulding Machines Model Type D968 250 ZO ( S3 ) Stroke Volume 2000 cm3 Injection Pressure 1670 bar Platen 560 mm x 630 mm Extended Daylight 860 mm Top and Bottom Hydraulic ejectors 400 mm stroke Strip Intake Control With Vacuum Pump Years: 2014 / 2015

speed of feed:: 60 m/min feed:: 5 - 99.999,9 mm cuts max.:: -- Schnitte/m cross-section width:: 5 - 90 mm cross-section heigth:: 5 - 90 mm Condition: Second-hand, Specification: Strip and tube cutting unit • Cutting unit: Impact blade cutting with cutting sleeves • Material diameter approx.: 5–90 mm • Conveyed by two drive belts • Distance between the belts max.: 90 mm • Belt adjustment via motor, controlled via control panel • Lower belt fixed, upper belt motor-adjustable • Belt contact length approx.: 500 mm • Contact width: 80 mm • With a maximum speed of approx.: 60 m/min • Electronic length measurement: 5 – 99,999.9 mm • Maximum cutting accuracy: +/- 2 mm • Cutting is performed by a servo motor: 1 kW • Power supply: 380/400V, 50Hz, 5kW • Material feed direction: from right to left • Weight a ...

volt: 380 V weight: 1,4 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 300 kN injection volume: 180 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine for rubber - second-hand Clamping unit: - Clamping unit: vertical - Clamping force: 300 kN - Platen size: 300 x 300 mm Injection unit: - Maximum injection volume: 180 cm³ - Mains supply: 3x 400 V, 50 Hz - Power rating: 11 kW - Control system: MAPLAN The machine is still in production and can be viewed in operation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 4.500 kN injection volume: 5.000 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 10000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 5,000 cm³ - Injection pressure: 2060 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 38 kW - Installed heating capacity: 67.5 kW - Weight: Clamping unit approx.: 8,900 kg Injection unit approx.: 3,200 kg Hydraulic unit with oil and control cabinet 2,350 kg - For dimensions, see the installation data in the appendix There are 6 machines available, manufactured between 2001 and 2004. The data ...

clamping force: 2.700 kN injection volume: 6.000 cm³ screw diameter: -- mm platen size: 560 x 630 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 2.700 kN - Platen size: 560 x 630 mm - Max. stroke: 550 mm (see data sheet) Injection unit: - Max. injection volume: 6,000 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 28,2 kW - Installed heating capacity: 49,9 kW - Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 1,860 kg Total weight approx.: 10.600 kg - For dime ...

clamping force: 4.500 kN injection volume: 3.300 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 3,300 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N - Motor power: 35,5 kW - Installed heating capacity: 73,9 kW - Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg Total weight approx.: 16.300 kg - For dimensions, see the installation data in the appe ...

clamping force: 4.500 kN injection volume: 5.600 cm³ screw diameter: 610 - 985 mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 610 - 985 mm (see data sheet) Injection unit: - Injection unit type: ADV - Max. injection volume: 5,600 cm³ - Injection pressure: 2200 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Pump capacity: 27 kW - Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.: 21,000 kg - For dimensions, see the installation data in the appendix The data for this ad w ...

machine measurements: 3.000 mm machine weight: -- kg power capacity: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 3000 kN heating plates:: 600 x 630 mm electrically heated:: °C heating power:: kW piston stroke:: 420 mm no. of stages:: 1 Condition: Used, reconditioned Specification: Press 600 x 630 mm, second-hand - clamping force: 300 tonnes (3,000 kN) - closing: from bottom to top - Heating platens: 2 electric platens, with new heating rods - Heating platen dimensions approx.: 600 x 630 mm - Distance between the heating platens approx.: 420 mm - New electric valves - AC machine output oil pump: 5.5 kW - New control cabinet with Siemens 7’ touch panel - PLC control system make Siemens S7-1200 - New cabling - Frequency inverter made by Schneider - Light barriers in the front area, Overhauled in accordance with CE standard safety regulations Operating instructions and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS ...

machine measurements: 1500 x 2400 x 1150 mm machine weight: -- kg power capacity: 12 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, reconditioned Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylinder refurbishment - Feed roller refurbishment - New safety cage - New rotary joint for water - New AC motor: 18.5 kW - New control cabinet with Siemens S7-1200 PLC system - New control panel with Siemens KTP700 Basic touch panel - New Siemens G120 frequency converter for variable speed - Remote maintenance device - New cabling - Pressure sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Refurbished in accordance with CE standard safety regulations Warranty: 1 year Option: TCU for temperature control of the water up to 95°C, for placement near the extruder The data for this ad  ...

specimen dia.: - mm length of specimen: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Volumetric samples - cutter / sample punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Klöckner DESMA rubber injection molding machine with increased clamping pressure is offered. Material processing: rubber, clamping force: 4500kN, min./max. mold height: 180mm/530mm, adjustable opening stroke: 570mm, clear distance between tie bars X/Y: 600mm/810mm, max. clamping area X/Y: 670mm/940mm, heating platen size X/Y: 670mm/940mm, injection: from above, max. injection volume: 3300cm³, injection force: 1886kN, max. injection pressure: 2150bar, screw diameter: 55mm, injection plunger diameter: 105mm, operating pressure: 250bar, number of control zones: 12, heating capacity per control zone: 21kW, ejector: hydraulic top and bottom, ejector slot spacing: 730mm. The machine is currently not operational because the control cabinet of the DRC 2000 (Simatic S7) is already being used elsewhere and is not part of the machine. Documentation available. Inspection possible by arrangement.

Key data: 2700 kN, 29 g/PS

We offer this DESMA D 969.250 Z (S3) rubber processing machine in mint condition, built in 2021. Clamping force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive capacity: 72/39 l/min Pump drive current consumption: 32.0 A Pump drive power: 22 kW Nozzle application force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Hydraulic motor hours: 730 hours, Hydraulic pump (clamping force): 65 Hours, Operating System: active 3,360 hours Ideal for the production of: - Technical moulded rubber parts - Seals and O-rings - Automotive and industrial components Condition & Avai ...

The rubber cyliners is new Auction-ID: A7-49767-8

In various dimensions, partly with mobile undercarriage Auction-ID: A1-49790-1565

In various dimensions, partly with mobile undercarriage Auction-ID: A1-49818-1565

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

Vakona ESK 125 Tumbler, vacuum mixing and tumbling machine, the machine comes with tumbling arm and mixing arm, container size 125 liters, MC control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Height 2130 Width 1410 mm Length 2130 mm Weight 1500 kg Capacity 1200 l Voltage Electrical: 400V 50Hz 3N Installed Power 9.1 kw Main material Stainlees Steel Load 1000 kg Mixing System Spiral With Paddles Product discharge Pneumatic dampers, front Mixer type Vacuum Mixer Shafts amount Double Shaft

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2

Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

with mixing and Meng arm cooling vacuum

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph