Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m
screw ø:: 60 mmscrew length:: 11D screw speedl:: -- U/mindrive power:: 18,5 kWCondition: used, overhauledSpecification: rubber extruder - used- screw diameter: 60 mm- screw length: 11D- screw length: approx. 660 mm- overhaul of screw and barrel- Overhaul of feed roller and safety cage- New rotary union for water- AC motor: 18.5 kW- New control cabinet with frequency converter for variable speed- New cabling- Pressure and temperature sensors on the extruder head- Safety device- CE marking and an operating and maintenance manual in EnglishOverhauled according to CE-Standard safety regulationsWarranty: 1 yearOption:3x temperature control units up to 95°C water temperature Power: 6 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Barwell C3 Preformer Extruder 2500 psi Output 600kg/hour Ram type Extruder Extruder size 250mm With Rotary Cutter 8 fixed speeds Year 1980
Berstorff Strainer Extruder Supplier Berstorff Type GE 150KSx16D Year of Construction 1983 Technical condition Good Weight ca. 12000 kg Sieve changing system Hydraulisch, Blasenspeicher 20lt/300Bar D=200mm
The cut pipes are deburred by wire brushes. Manufacturer: RSA Entragt- und Trenn- Systeme GmbH & Co Machine Type: NN-1500 Year of manufacture: 2004 Overall size: 4100 x 2100 x 1800 mm Workable area: Max pipe diameter 20 mm; Max pipe lenght: 2400 mm Wire brush size: 200 x 500 mm Electical data: 20 kW; 380 V; 41 A; 50 Hz Compressed air: 6 bar
Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!
screw ø:: 30 mmscrew length:: 16D screw speedl:: -- U/minCondition: used,Specification: Extruder - used- screw diameter: 30 mm- screw length: L = 16 D- extruder complete incl.: - motor - control cabinet - Profile/tube extrusion head with clamp - Temperature control The extruder is mounted on a base plate- Mass pressure measurement and display available- Operating and display elements are installed in the switch cabinet.- Mobile versionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel
screw ø:: 90 mmscrew length:: 20D screw speedl:: 0 - 60 U/minCondition: NEW,Specification: Rubber vacuum extruder - with warranty- Screw diameter: 90 mm- Screw length: L = 20 D (approx. 1,800 mm conveying length)- Screw speed: 0 - 60 rpm- Centre height of extruder: approx. 1,125 mm incl. base frame- Max. permissible injection pressure: 500 bar- with feed roller- Extruder water-tempered- Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump- Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm- Vacuum cylinder: three tempering zones BL = 1,057 mm- End cylinder: one temperature control zone ...
available Twin Screw - Rollerdie Extruder Description attached!
cold fed extruder Troester 90 mm x 16.D - Vac, with large hose / profile spray head with bayonet closure and upstream 200 mm strainer plate, new drive motor 50 KW - AC Siemens with completely new control, screw speed 1.stage 45 rpm, 2nd stage 70 rpm, new 5 zones temperature control - 1x head / 3x cylinder / 1x screw
available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!
screw ø:: für Extruder 90 mmscrew length:: -- screw speedl:: -- U/mindrive power:: 13,6 kWCondition: little used, as good as newSpecification: gear pump ZP 75/50 for extruder size 90- SEW helical gear units: R 97- Siemens direct current motor: 1 GG5 118- Drive power: 13.6 kW, 57 A- curved tooth coupling- With clamp for the head connection,- Clamping flange for extruder and head connection,- Base plate with linear guide rails,- Tooth shaft diameter: 75 mm- tooth width: 50 mm- helical gearing, hardened steel bearings, right-hand drive- without controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw ø:: 120 mmscrew length:: 17D screw speedl:: 42 U/mindrive power:: 138 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
