rubber extruder used for sale

General SKULX013 LocationBarneveld MakeClextral Specified Features - Double screw extruder Double screw extrudercheck L/D36 Number of heating zones:8 Electric heatingcheck (8 × 1.8 kW = 14.4 kW total) Water coolingcheck (2 m³/h, 4–6 bar, 11 kW) AC-motorcheck (14 kW, 2000 rpm) Screw speed1200 rpm (max) Number of temperature controllers:8 (for each heating zone) Information TypeEV 29/32 High Torque Mach.No.TD 4 004 427-0020 EN Year of construction2002 With switchgearcheck Weight2000 kg Extra SpecificationsLubricating unit Power: 0.3 kW Water flow: 0.13 m³/h Thermic power: 0.75 kW  : Hydraulic unit for barrel drive Power: 0.37 kW Oil capacity (ISO HV 46): 5 L Setting pressure: 187 bar  : Barrel cooling (extra details) Type: Electrovalve Number of cooling areas: 9  : Water pump Manufacturer: Clextral – DKM Type: SPK PP12 Flow: 19 L/h Maximum pressure ...

Manufacturer: Kowin Model: 232 Machine 1 : - Operating hours 0 - Year of Manufacture: 2024 Machine 2 : - Operating hours the machine donsen´t show operating hours . The machine was only doing g 10-15t of regrind per month from 2011 till 2024 - Year of Manufacture: 2011 Find more here - / Contact us at -

Key data: 20 mm, 150 , 2150 U/min

with PE screw, Capacity approx. 350 kg/h complete with motor, gearbox and Heating tapes Good condition, immediately available

PLASTIMAC LAB EXTRUDER, for blown film, suitable for testing granulate, 25 mm screw diameter, 70 mm diam. die, 500 mm collection frame, 7,5 Hp drive, complete wuth supporting structure, (corona treatment+small printer can be sold separately if required), installed power - used power in work: about 60-65% : 7,5 Hp, working width: 500 mm, conditions: good

A Lenhard extruder for butyl rubber is available. Application: insulating glass production, material: thermoplastic butyl based on polyisobutylene, max. operating temperature: 140°C, max. butyl pressure: 140bar, max. hydraulic pressure: 150bar. An on-site inspection is possible.

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

Haendle Extruder type PZG60b/50 with doubleshaft mixer MDVG920a, 29 cbm/h, 30 bar

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, for LDPE and HDPE, die diam.97 mm., 800 mm wide single winder, fixed pull off, fixed die head, Maximum throughput rate 35 kg/h, height of pul off 3.700 mm from ground, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partially reconditioned (photos show the machine during reconditioning), installed power - used power in work: about 60-65% : 13 ...

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Cextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam outl ...

PowerHeater PH100-1, Capacity: 150 - 240 kg/h, Steam: 50 - 100 kg/h, 10 Bar, Compressed air: 6 - 8 Bar, 50 Nl/min, Water: 16 Bar, 1500 l/h, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 3000 x 1400 x 1800 xmm, Weight: 850 kg, Klovborg slab-outlet conveyor, Serial number: 220188-2, Power: 230VAC, 50Hz, 1Ph, Dimensions: 1250 x 500 x 1450 mm, Weight: 65 kg, Source Technology screw trolley (2 pc.), Serial number: 65800-41-110562 / 66400-33-110562, Working load: 250 kg, Dimensions: 1500 x 1400 x 1950 mm, Weight: 100 kg, With Kito CX003 manual hoist

Rubber buffers / silent blocs for concrete block machines Brands: SCHLOSSER, Hess, Masa, Omag, Rekers, Frima, Techmatic Web: contec-ek

Knife Drawing No. 05714-223C1

Rubber Air Spring, Vibratory mounts, Machine Feet, Machine Legs, Antivibratory feet, Leveling Feet, Heavy Duty Feet Load (Kg/pc): 1200 - 3400 Max. Pressure Bar: 6 Dimensions: S: 370mm D: 360mm H App: 111mm d: 200mm h: 8mm Bolt: M20 Four pieces on stock. Similar models that we can produce: TL1: Load (Kg/pc): 25 - 60 Max. Pressure Bar: 3 TL2: 80 - 300 Load (Kg/pc): Max. Pressure Bar: TL3: Load (Kg/pc): 270 - 800 Max. Pressure Bar: 5 TL4: Load (Kg/pc): 650 - 1500 Max. Pressure Bar: 6 TL6: Load (Kg/pc): 3000 - 6500 Max. Pressure Bar: 6 It can fit to Bruderer, Mabu, Schaal, Schuler, Haulich and other machines. For any questions please contact us.

1 x Alpha Technologies Mooney MV2000e Viscometer software discs and operation manual are included. You will have to register the software. PC not available. In good condition.

1 x Farrel Bridge Model BR lab banbury mixer, Serial no. 91M7000, year: April 1991, Chamber volume 1.5litre pneumatic hopper and swing side discharge door, David Brown gearbox, 30kW DC variable speed motor and controls. Fully guarded with Key interlock system. Complete and in excellent condition.

Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!

Mesh belt for AUMA / Rotocure new and unused Length: 14100mm Width: 2250mm

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

Berstorff Rotocure AUMA 20-S Drum dia: 2000mm Drum width: 2600mm Sandvic Steelbelt Description attached!

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

Rubber sealing profile, sealing plate, curing tool, seal, edge protection, solid rubber rectangular profile -Rubber sealing profile: with 2 grooves, 3 pieces -Length: 3 x 8450 mm / total 25.35 m -Cross-section: 50 x 55 mm -Groove width: 5 mm -Weight: 120 kg

Rubber mat, rubber sheet, rubber stop, stop plate, rubber cover, rubber pad -Rubber cover: Rubber pad -Thickness: 30/6 mm -Length: 634 mm -Width: 100 mm -Height: 130 mm -Quantity: 18 pieces available -Price: per piece -Weight: 3.8 kg/piece

Transport rollers, wheels, casters, carrying rollers -Rubber-coated drive rollers, various designs -Roller diameter: 145 mm -Hole: Ø 20 mm -Roles: 11 -Price: complete -Design/Quantity: see photo -Total weight: 10.2 kg

Tires, solid rubber tires, tractor tires, forklift tires -Tire size: 18 x 7 - 8 -Rim: 4.33 R-8 -from forklift: Still type EFG 1.0/5002 -Number: 2 pieces -Price: complete -Dimensions: Ø 440/152 mm/piece -Weight: 25 kg/piece

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: CF-D-160-10 -Shaft: Ø 22 mm (pre-drilled) -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H70 mm -Weight: 9 kg

Guided from bronze Drawing No. 05714 -227D1

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust SC 15 from GSL aerial work platform -Tire size: 5.00-8/3.00 -Bolt circle: Ø 110 x 15 mm -Inner diameter: 67 mm -Quantity: 1 piece -Dimensions: Ø 460 x 125 mm -Weight: 20 kg

Rubber mat, rubber sheet, rubber stop, stop plate, rubber cover, rubber pad, rubber mat -Rubber cover: Rubber pad -Thickness: 9 mm -Length: 1000 mm -Width: 200 mm -Weight: 2.4 kg

rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat -Rubber cover: rubber pad -Thickness: 9 mm -Length: 1985 mm -Width: 200 mm -Weight: 5.1 kg

tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10 2 pieces -Tire size: 23 x 5 SC 10 RIM 3.75 P -Bolt circle: Ø 160 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 41 kg/piece

tires, solid rubber tires, forklift tires -Manufacturer: Vorwerk Rota, solid rubber tires 3 pieces -Tire size: 18x7-8 rim 4.33 R-8 532/272-1 -Bolt circle: Ø 148 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 22 kg/piece

Fogg & Young Bale Cutter

tires, solid rubber tires, forklift tires -Manufacturer: Solideal, solid rubber tires 2 pieces -Tire size: 23x9-10 RIM 6.50F-10 -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 465 x 200 mm/piece -Weight: 40 kg/piece

tires, solid rubber tires, forklift tires -Manufacturer: Rigdon, solid rubber tire -Tire size: 23 x 9-10 -Rim: 6.50 F-10 -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Quantity: 1x tire available -Dimension: Ø 570 x 210 mm -Weight: 59 kg

tires, solid rubber tires, forklift tires -Manufacturer: Gumasol, solid rubber tires type GLE 2 pieces -Tire size: 8.25-15 -Rim: 6.0-15 -Bolt circle: Ø 225 x 32 mm -Recess: Ø 165 mm -Price/Delivery: complete -Dimensions: Ø 780 x 225 mm -Weight: 110 kg/piece

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tires 2 pieces -Tire size: 250-15 RIM 7.00F-15 -Bolt circle: Ø 225 x 28 mm -Recess: Ø 175 mm -Price/Delivery: complete -Dimensions each: Ø 700 x 215 mm -Weight: 90 kg/piece

rubber damper, engine damper, clutch, rubber coupling -Rubber coupling: rubber damper engine damper -Dimensions: see photos -Total dimensions: 240/210/H130 mm -Weight: 4.5 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Kumaneko, solid rubber tires, 2 pieces with rim -Type: Widewall -Tire size: 27x10-12 -Bolt circle: Ø 220 x 27 mm -Recess: Ø 160 mm -Price/Sale: complete -Dimensions: Ø 600 x 255 mm/pc. -Total weight: 158 kg

tires, solid rubber tires, forklift tires -Manufacturer: Rigdon, solid rubber tire Solid with rim -Tire size: 18x7-8/4.32 (180/70-8) -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Quantity: 1x tire available -Dimensions: Ø 390 x 155 mm -Weight: 21 kg

REP H48Y10W Horizontal Injection Moulding Machine Year of construction 2005 Machine Parameters Volume [cm3] 1000 Clamping force [kN] 1930 Injection pressure [bar] 1500 Moulds dimension [mm] 450x450 Tonnage 1.9t Platen size: 450x450 Cycles: 2,220,383 General condition: operational Dims [mm]: 4200 L x 1400 W x 2200 H Weight [kg]: 6750

Code: 0005 Brand: OMMA / OTHER BRANDS 2300 Model: 2300 Nr 2 rubber-coated rollers Technical data Length mm 2300 Diameter mm 230 Rifling 3,4 x 1 cm / 9 x 1" (inch) Overall dimensions of wooden crate for 2 rollers: mm 3000 x 900 x 550 h Weight kg 800

Machine number 185386/2008

Machine number 205557/2012 Without softwear! Head failure!

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tire with rim -Tire size: 18x7-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Quantity: 1x tire available -Dimensions: Ø 430 x 160 mm -Weight: 30 kg