rs1 used for sale

Ratiostretch RS10/2 Height: 2540 mm Width: 1650 mm Turntable diameter: 1650 mm Length: 2600 mm maximum rewindable product weight:2000 kg maximum wrappable product height: 2330 mm maximum wrappable product basic dimensions 1100x1200 mm Turntable speed: 12 rpm (max.) / 3 rpm (min.) Lifting carriage speed: 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230V, 50Hz, 6A Year of manufacture 2012 weight: 480 kg Foil width: 450-500 mm Foil diameter: 240 mm Roll weight: up to 20 kg Foil thickness: from 7 µm Current mounting: embedded in floor, optional drive-on ramp available Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Max. Palettenabmessungen: 1100 x 1200 mm Max. Palettengewicht: 2000 Max. Palettenhöhe: 2330 Drehtellerdurchmesser: 1650 Masthöhe: 2540 Drehtellerhöhe: 85 Width in mm: 1650 Länge in mm: 2600 Construction y ...

Uninterruptible power supply, UPS APC Back-UPS RS1500 Power: 865 W / 1500 VA Input voltage: 220 - 240 V 1AC, 10 A Output voltage: 220 - 240 V 1AC Output current: 6.5 A 50 / 60 Hz used, tested ! Dimensions: 340 x 150 x 370 mm

H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No Walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller

You can find Hyundai SPT-V30T CNC machining center, lot 18 in this auction Control: MAC mini E(P) on mobile console Chuck diameter: 190 mm Center height: 140 mm Diameter: 40 mm from lot number 17

Description Inlet size: 230 mm x 295 mm Cutting Chamber Size: 150 mm x 300 mm Motor power: 4 kW Rotating Blades: 12 Fixed blades: 2 Grid hole size: 5 mm Material extraction: collection drawer with hole for suction. New rotary blades.

Used machine in good condition. Available for immediate delivery. - Screw diameter: 95 mm - Injection pressure: 2.230 bar - Injection volume: 3.544 cm? - Screw L/D ratio: 26,4 - Ejector stroke / force max.: 300/285 mm / kN - Clamping force: 13.500 kN - Mould height max: 1.400 mm - Mould height min: 800 mm - Daylight between platens max: 3.100 mm - Platen size (h x v): 2.300 x 2.010 mm - Distance between tie-bars (h x v): 1.700 x 1.350 mm - Control: POLARIS - Core pulls: 2 - Power: installed max: 180 + 87 kW - Weight: 70.000 kg - Dimensions (long x wide x high): 12.000 x 3.500 x 5.000 mm

H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller

Milling spindle Colombo RS110.2250 HSK63F; 7.4kW; 24000 rpm The spare part is completely overhauled. New bearing ceramic, balanced, new disc springs, new seals pressure cylinders, etc. Cooling by electric fan 230V. Warranty 6 months

centre height: 235 mm turning diameter: 470 mm turning speeds: 2700 U/min turning length: 1500 mm inkl. Zubehör (siehe Bilder) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping Force: 1350 ton // Shot Weight (Max): 3225 g

Repair service Reparatur Service POWER SUPPLY RS10-24 A for Mazak – Repair price 100 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. Repair of other power supplies on request. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Control: HEIDENHAIN iTNC530 x-travel: 1500 mm y-travel: 800 mm z-travel: 1000 mm spindle head swivable left - right: 0-180 ° c-axis: 360 (0.001) ° b-axis: +/-90 (0.001) ° table-size: 1430X800 mm table diameter: 802 mm workpiece weight max.: 1500 kg tool magazin:: 60 spindle turning speed range: -16000 U/min spindle taper: HSK63 feeds x/y/z -stepless: 0-30000 mm/min feeds rotary table: 20 U/min dimensions of the machine ca.: 4x3.5x3 m weight of the machine ca.: 18 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 330 m², 7000 kg, 4600 mm

Extraction system Venti-Oelde Year: 1995 Filter flow rate 42000 m3/h Ventilators: 1 x 30 KW / 24,000 m3/h 1 x 15 KW / 5000 m3/h Trough Conveyor + Fan Return air

YEAR: 1999 HYDRAULIC PRESSURE: 185 bar WEIGHT: 64000 kg INJECTION WORKING CAPACITY: 13800 SCREW DIAMETER: 135 INJECTION PRESSURE: 1600 bar INJECTION CAPACITY: 8588 cm3 HEATING CAPACITY: 109 kW OIL VOLUME: 2800 L STANDART DRIVE SCREW TORQUE: 11000 Nm SCREW SPEED: 113 rpm SCREW DRIVE POWER: 141 kW PLASTICIZING RATE: 152 g/s INJECTION RATE (50Hz): 1676 cm3/s INJECTION RATE (60Hz): 2048 cm3/s HIGH TORQUE DRIVE SCREW TORQUE: 12500 Nm SCREW SPEED: 85 rpm SCREW DRIVE POWER: 121 kW PLASTICIZING RATE: 152 g/s INJECTION RATE (50Hz): 1676 cm3/s INJECTION RATE (60Hz): 1676 cm3/s Note : Machine has some electronic problems

CONTROLS   CNC controls HEIDENHAIN I TNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 1500 mm   Y-axis travel: 800 mm   Z-axis travel: 1000 mm   rotating range B-axis from: 90 °   rotating range B-axis up to: -90 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1480 mm   table surface (front-back): 800 mm   clamping surface diameter: 802 mm   workpiece load (max): 1500 kg SPINDLE / HEAD   spindle revolutions (max): 16000 /min   tool fixture: HSK A63   drive power: 48 kW TOOL MAGAZINE   number of positions: 60 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequ ...

manually operated, air-cooled Rated power at 50%ED: 2.4kVA Short circuit current: 7.5kA Electrode force max.: 180daN Projection: 250mm --- equipped with: - 5m connection cable - Standard electrode arms 250mm Control RS15 (optional) --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control Type Siemens 840D X Axis Stroke 630 mm Y Axis Stroke 800 mm Z Axis Stroke 850 mm N. pallets 12 Table dimensions 500 x 500 mm Max. workable weight 600 Kg Spindle speed 18,000 rpm Cooling lubricant through spindle center 80 bar Tool holder HSK-A63 Tool magazine 303 positions Renishaw OMP60 infrared probe Continuous table 360,000 positions Magazine for round pallet RS12 Accessories Chip Evacuator, High Pressure

Screw compressor, compressor RENNER type RS 11 ( RS11 ) P max.: 10 bar Q: 1500 l/min ( 1,1,00 5 m3/min ) Engine: 11 kW 400 V 3AC 50 Hz supply air connection ( inside ): 290 x 330 mm used, tested ! Dimensions: 1080 x 680 x 1780 mm

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

Three knife trimmer Feeder (4 x) Stitching unit (0380) Stacker (Rima RS1410 (2011) Cover feeder

General SKULU005 LocationNetherlands MakeHerbold Main Features Motor110 KW Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Information With control cabinetcheck Floor space10,9x7,3 m Total height7,3 m CEcheck Extra SpecificationsThe system comprises a range of specialized machinery tailored for plastic processing and material separation: 1. Granulator (Type SMS 45/60-H5-3): This machine is equipped with a cutting chamber, rotor, and high-quality blades for size reduction. It also includes an extraction system for efficient operation. 2. Air Separation Unit (Type SZS2 450/150): Featuring an air stream separator and adjustable air flow, this unit efficiently separates light materials. It is complemented by a rotatory lock and a suction unit for enhanced performance. 3. Buffer Bunker with Screw: Serving as a material buffer, this component has indicat ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Pressure with rubber belt NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Constructor model : RT20 motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine no. positions 6 Gluing system yes glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping Constr ...

Description: Max. panel height 60 mm Max. edge thickness 3 mm Max. forward feed speed 24 m/min Top pressure , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit Constructor model : RT20 automatic timed intervention : , motor power : 2 KW r.p.m. : 9000 RPM Edge coil magazine , no. positions 6 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : IT90 no. motors : 2 motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming Constructor model : RS10 no. motors : 2 motor power : 0.75 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round Constructor model : RF10 no. motors : 2 motor power : 0.37 KW r.p.m. : 12000 RPM NO. EDGE PROCESSI ...

Table size: 600 x 530 mm 5.5/7.5 kW on spindle Number of positions on carousel: 14 Central lubrication: yes, "A-Ryung" Remark: without machine clamp visible in the photos, this one has lot number 166 in this auction note: without Kitagawa Autodex RS160RAHO bidder axle, this one has lot number 19 in this auction Dismantling + loading cost by professional dismantling team: 1000 euros Lot 19 , a 4th automatic axis, can be bought together with this Hyudai SPT-T30