134,958 used machines on RESALE, but how to find them? Machine Search
Compressed air tank up to 11 bar, volume 500L
; Gross weight [kg]: 670; Engine: Battery System: LiFePO4; Accessories: Battery, Control Panel, AC output sockets: 2x 32A (1 for parallel), AC Input sockets: 1x 15kW, DC input: 1x 30kW
; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
; Gross weight [kg]: 4100; Engine: Volvo TAD1345GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515
Lapping machine, STAHLI FLM 500, 3-ring lapping machine This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_o ...
used baler Manufacturer: PAAL Type: DOKON 500 with twine tying Year of construction: May 2014 Technical data: Binding: 5-fold horizontal Press weight up to: approx. 30 t Press force: 122 t Specific pressing force: 9.90 kg/cm² Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 1 x 45 kW Throughput: 250 m³/h Pressing services: at 100 kg/m³ bulk density: approx. 25 t/h at 150 kg/m³ bulk density: approx. 30 t/h at 200 kg/m³ bulk density: approx. 35 t/h Binding: 5-fold horizontal Transport dimensions: Length: 13,300 mm Width: 2,600 mm Height: 3,300 mm without yarn unwinding devices, without control cabinet, without binding twine, without feed belt, without a personal protection system, without conveyor belt hopper and without walking surface with vertical la ...
Frequency-controlled drive motor Drive test bench Power 110 KW Voltage 400 V Speed 1500 to 5000 rpm adjustable motor with -Frequency - Incremental encoder, mains choke, mains filter - External fans Emergency Out Facility Hand control unit Frequency: Type: VCD 4 S 160A AZ/NS Serial Number: BKQ4S160AN20A-1 Output power: 207 KVA Motor power up to 160 KW Total weight approx. 1000 kg
SIM SF 500 Vibratory Spiral Conveyor SIM SF 500 Vibratory Spiral Conveyor with SIM BB-20 Belt Hopper and AKB DTB-UU-750/20 Linear Conveyor SIM SF 500 Vibratory Spiral Conveyors 230 V 50 Hz Diameter: 500 mm SIM BB-20 Belt Hopper 20 liters Filling volume: 20 litres Max. filling weight: 35 kg Chute width: 80 mm Belt speeds: 0.1 - 0.6 m/min Bunker tray, chute: stainless steel Drives: AC gear motor 230V/50Hz AKB DTB-UU-750/20 Linear Conveyors Delivery without enclosure More items - new and used - can be found in our shop! International shipping costs on request!
Availability: as of now Machine dimensions (LxWxH): 0.8 x 0.8 x 2.0 m Weight: 150 kg Bottle drying system was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel. Consisting of: - 1 Paxton high-performance centrifugal blower XT 500 4kW - 2 stainless steel heavy-duty air blades 580mm lg. - 2 stainless steel air blade holders for Adjustment in 3 levels - 1 stainless steel base frame with attached Blower - 1 stainless steel air distributor 2 x DN 76 mm - 1 soundproof enclosure for XT 500 blower - 4 stainless steel covers on all sides as Splash guard Additional equipment: - 1 pc. Geset stainless steel nozzle 40 x2 mm incl. piping and hose For lid blow-off before inkjet The Gesete XT 500 bottle drying machine was manufactured in 2014 and is designed for drying bottles in front of a labeling machine (Etima) ...
Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 240/90/60 mm -Weight: 1.7 kg
Code: 0444 Brand: STROMAB Model: TR 500 MATRIX 4 - CE Standard Automatic cut-off saw equipped with pusher Matrix 4 - with defects removal and 4 optimizing criterials - CE Standard For the sizing and end-trimming of boards, strips, squares of solid wood or timber products Blade diameter 500 mm - Motor Hp 10 – Blade revolutions n° 3000 Cutting dimensions : With thickness 60 mm cutting width mm 360 – With thickness 100 mm cutting width mm 325 – With thickness 115 mm cutting width mm 300 – With thickness 135 mm cutting width mm 250 Worktable height mm 1000 Speed from right to left Electronic programmed pusher Matrix 1 for programmed cutting in sequence Technical data MATRIX: Automatic or semi-automatic cutting cycles Stored cutting cycles 99 Programmable measures for each cycle 15 Useful stroke mt. 7 Positioning speed mt/min 0-40 Max return speed mt/min ...
Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details.
The DYNAJET 500th HELI Blue Performance is designed for professional users who need a high-performance, trailer-based high-pressure waterjet system for demanding industrial applications. With hot and cold water operation up to 500 bar and a maximum flow rate of 30 l/min, it is ideal for tasks such as surface preparation, paint and rust removal, concrete renovation and maritime maintenance. Its robust trailer design is designed for demanding daily operations and transport between job sites. The single-axis design supports easy maneuverability, while the integrated single-point lifting eye allows for efficient lifting and positioning when crane handling is required. The Targa design separates the motor, pump and burner area from the operator area, which supports safe and ergonomic operation while reducing noise pollution at the operator station. The colour display provides a clear ov ...
This 5-axis DECKEL MAHO DMU 50T was manufactured in 2003. It features a 3+2 axis setup with CNC-driven linear axes and a manual swivelling rotary table for enhanced versatility. The machine comes equipped with tools and an attached tool list holder for convenience. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T universal machining centre we have for sale. Contact us for further details.
This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details.
1. Equipment Overview Equipment: Siemens SGT-500 Gas Turbine Packages Quantity: Two (2) units available Condition: New Surplus / Zero Operating Hours Manufacturing & Storage: Manufactured in 2007 Never operated – zero operating hours Preserved and stored according to OEM preservation procedures Originally supplied for a cancelled FPSO project Certification: Marine Rated DNV (Det Norske Veritas) Certified 2. Gas Turbine Technical Data Model: Siemens SGT-500 Configuration: Single-shaft industrial gas turbine Fuel: Dual Fuel (Natural Gas / Diesel) Frequency capability: 50 / 60 Hz ISO Power Output (Indicative): Natural Gas: approximately 17.4 MW Diesel: approximately 17.0 MW Performance: Specific Fuel Consumption: Natural Gas: 221 g/kWh Diesel: 262 g/kWh Heat Rate: Natural Gas: 11,066 kJ/kWh Diesel: 11,200 kJ/kWh ...
A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement.
A Daiß + Partner CNC automatic band saw with a double-miter twin-column design is offered. Cutting capacity X/Y: 500mm/320mm, saw blade dimensions: 4700mm/34mm/1.1mm, feed length: 2000mm, rapid traverse: approx. 12m/min, blade speed: 15-105m/min, CNC control: PS 210. Equipment: powered chip brush, Power-Box hydraulic cutting pressure adjustment, Micro-Cooler coolant spray system, hydraulic saw blade tensioning and saw blade breakage monitoring. An on-site inspection is possible.
The steam boiler plant was put into operation in February 1992 and has been running smoothly for the entire service life since then. The steam boiler has a capacity of NW 7170 ltr and is operated with a maximum operating overpressure of 10 bar. It can run on oil and gas. The steam boiler was regularly serviced and inspected by the TÜV. The last TÜV inspection took place in 2018 without any complaints. The steam boiler has been filled with treated water since its decommissioning in 2019 and can be dismantled and transported away immediately. The closure took place due to a plant closure. The complete documentation is available in the original. Further information, including price, can be requested by calling 0345 6868-0 or infonovachem
Heraeus Kendro WU 6100 High Temperature Convection Oven - 500°C - 95 L Heat circulating air drying oven for precise thermal testing of high-quality materials and for demanding thermal processes in the high-temperature range. For precise heat treatment processes up to 500 °C. Provides precise and uniform temperature distribution as well as exact adherence to the selected temperature. Manufacturer: Heraeus – Kendro (Thermo Fisher Scientific Brand). Made in Germany. Technical data: Interior volume: 95 L Temperature range up to 500°C External dimensions (WxHxD): 985 x 840 x 905 mm Internal dimensions (WxHxD): 475 x 475 x 420 mm Weight empty 195 kg 400 V. 50/60 Hz. 11.4 A. 5.4 kW. Equipment: Temperature controller with digital display (thermicon P) Over- and under-temperature protection Throttle valve for infinitely variable fresh and exhaust air regulation Time ...
; Power [PS]: 544; Gross weight [kg]: 3661; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888
; Gross weight [kg]: 2924; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 721
turning diameter over bed: 400 mm turning diameter over slide rest: - mm turning length: 1000 mm total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,51,21,6 m Machine has been partially overhauled Among other things engine renewed ( 8.000 EUR ) The repair was not completed due to plant closure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 0 mm workpiece length: 0 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Crack testing device for large series of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 24000 kg length: 5000 mm width: 2500 mm loading area height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Dimensions: see photos / technical drawing -Quantity: 1x mounting cube available -Dimensions: 500/300/H300 mm -Weight: 89.7 kg
We offer a highly productive 3D printer for industrial series production The system was finally used with aluminum powder AISi10MG The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck TruPrint 5000 G4 Serial Number S0731C0008 Year of construction 08/2018 Time-of-Flight Laser Laser 1 Beam on On: 5165 hrs Laser 2 Beam on On: 5096 hrs Laser 3 Beam on on: 5023 hrs Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Poll Monotoring options included Filter system Accessories: 2pcs. Build Cylinder 3pcs. Dosing cylinder 1 pc. overflow tank used 1 Pc. Overflow Tank NEW Manuals 4 Heat Exchangers NEW 2 pcs Easy Filter NEW 3 pcs NTRON SIL ...
This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details.
A small Alfred Reith bench punch is available. Punching force: 50kN, max. round hole diameter: 60mm, max. square hole dimensions X/Y: 46mm/46mm, max. mild steel sheet thickness: 3mm, max. stainless steel sheet thickness: 2mm, max. aluminum thickness: 4mm, throat depth: 500mm, stroke: 66mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.
weight max. in kg: 5.500 kg stroke: - mm fork length: - mm weight: ca. 7.400–7.600 kg (je na kg drive: GAS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible.
A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.
Used Used labeller Newtec 6.500 bph: Year: 2010 Condition: As Is EA 636 | LABELLER NEWTEC Year: 2010 Speed: 6.500 Bph Direction: Clockwise Number of heads: 6 Number of stations: 2 Type of application: Front Back Bottle formats: Bordolese from 500g to 1,5Lt Safety protections Code: EA 636 More details: https://bottlingscout.com
ABB 2-Station Welding Robot Cell You are bidding on a professional, fully functional 2-station robot welding cell for continuous industrial use. The system is ideal for automated and highly efficient MIG/MAG welding from small to large series (e.g. in automotive or mechanical engineering). Thanks to the clever two-station principle (shuttle table/parallel stations), the operator can safely insert new components or remove finished workpieces on one side, while the robot welds productively on the other side. Plant Components Industrial Robots & Control (ABB): - Robot control: Reliable and robust ABB S4 / S4C generation - Programming handset: Original ABB Teach Pendant with joystick for precise teaching (teaching) of welding paths. - Additional axes: Both stations have synchronized, motorized rotary axes (nameplate: ABB / ELMO, type: PS 60/4-50-P-LSS-3985) for optimal posit ...
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gluingmachine for paper, Width: 500 mm, Options: for PVA glue, floorstand model
bookpress, Make Hercules, Model 5040, Year 1950s, Size 400 x 500 mm, Available Direct, Size: 400 x 500 mm
bookpress, Make John Marshall, Model 5040, Year 1940, Size: 400 x 500 mm
Kallfass universa 5050 sealing machine, kallfass compact 650 shrinktunnel, year 2000, welding width 525 mm, clearance: 150 mm, speed up to 35 cycles per minute, fully automatic
faceplate diameter: 500 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diameter: 230 mm table diameter: 500 mm workpiece height: 150 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
