135,440 used machines on RESALE, but how to find them? Machine Search
Transnorm belt conveyor GF 3990-700-600 RA2069 Technical data: Conveyor length (NL): 3990 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3990 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: ...
Nozzles, injectors, diesel engine nozzles -Type: 214 5079 Quantity: 10 pieces available Price: per piece -Weight: 0.4 kg
sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m Manual back stop up to 500 mm Side stop and table extensions Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 022 503 Price: per piece Quantity: 5 available -Weight: 0.4 kg
Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...
table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 18 mm -Drain: Ø 60 mm -Number: 26 available -Price: per piece -Dimensions: 540/440/H300 mm -Weight: 4.3 kg
NIDEC ARISA S-2-500-240-120-FD mechanical press was built in 2006 in Spain by Nidec Press & Automation Co. (NP&A). It is an extremely versatile press that is used in the series production of components for the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, i.e. precise punching and stamping of metal parts. In addition to its standard purpose, with the appropriate tooling and material feeding systems, the machine can also be used as a transfer press or progressive press. All processes are performed with a high press force of 500 tonnes. The drive system of the NIDEC ARISA S-2-500-240-120-FD press is based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution guarantees even torque transmission and a smooth working cycle. The slider, on the other hand, is guided in multiple points by rolle ...
Key data: 500 mm, 200 mm, 77 mm
Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.
Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW
End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 -Hole: Ø 27 mm -Cutting material: HSS-E -Price/Fee: complete -Transport dimensions: 150/75/H75 mm -Weight: 2.9 kg
capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...
Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!
Key data: 500 t
DURENDUS 500 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 46.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...
Braumeister Micro Brewery System – 500 L The Braumeister is a fully automated brewing system designed for simplicity of operation, ease of cleaning, and reliable performance. It features a five-step automated control process that streamlines the brewing cycle and ensures consistent results. The 500-liter system is well suited for small commercial applications such as bars, cafés, and pilot breweries, as well as for highly experienced home brewers. The unit is supplied with integrated wheels and a hoist for ease of handling. It has a compact footprint, fully automated operation, and a jacketed vessel for efficient cooling. The system also includes a whirlpool function, making it a comprehensive solution for small-scale commercial brewing. Technical Characteristics Manufacturer Speidel GmbH Model Braumeister 500 Litre Manufacturing year 2016 Capacity approx. 500 l fin ...
Transnorm belt curve conveyor right GKF 90°-700-500-IR450 - NEW RA2312 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 450 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 0,67 scope of d ...
Specifications: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg
Key data: 45 °, 3500 mm, 1350 mm
Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 500 liters Machine dimensions in cm: Length: 178 Width: 102 Height: 155 Electric power: 3 kW
Rexroth Type : 4281. 14 . 09903 . 97 3622-505045314 Kind. . No. 1190103 Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 From stock
Pressing tool, clamping pad, square profile, support profile, alignment pad -Square profile: clamping base, support profile, alignment base -Length: 503 mm -Number: 2x profile available -Price: per piece -Dimensions: 503/97/80 mm -Weight: 27.5 kg/pc.
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW
with LoadMaster - Laser Type: fiber TruDisk 5001 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 900 kg - Simultaneous positioning speed: 265 X+Y m/min - Laser Output: 5 kW - Maximum material thickness brass: 10 mm - Maximum material thickness cupper: 10 mm - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 25 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 60.443 h - Beam ON Working hours: 26.620 h - Weight: 12.000 kg - Electric consumption entire unit: 25 kW - Dimensions (long x wide x high): 8.800 x 4.800 x 2.400 mm
IDRA OL MG 500 die casting machine Year: 1984 | S/N: 6362 | Used DESCRIPTION: THIS MACHINE IS ON THE PART OUT AND SCRAP LIST This Hot Chamber Die Casting Machine 500 Ton is manufactured by Idra. The control was updated in 2017. Located at our warehouse in Preston, Idaho and is ready for inspection and shipping. We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers. Included specifications are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All machinery specifications, condition and details are represented accurately to the best of our knowledge. Confirmation by purchasing entity is recommended and encouraged prior to purchase. Price, location, and specifications are subject to change. SPECIFICATIONS: TONNAGE ...
MUBEA PROFI 500 hydraulic ironworker machine was built in Germany by Muhr und Bender Maschinenbau GmbH (Mubea). The machine, designed for complex machining of steel workpieces, is equipped with 4 individual workstations. They are capable of performing such processes as precise hole punching, as well as shearing flat bars, angle bars and bars. Each station is hydraulically controlled. The extremely robust design of the machine additionally ensures maximum process stability during even the most intensive challenges. All of this makes the offered Muhr & Bender PROFI 500 ironworker machine the perfect choice for increasing production efficiency in industrial facilities and locksmith workshops. Technical specifications of the MUBEA PROFI 500 ironworker machine General data - maximum press force: 50 t (500 kN) - number of workstations on the Muhr und Bender PROFI 500 machine: 4 Flat b ...
Key data: 300 mm, 500 t, 350 mm
Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.
Automatic loading up to 6.5m LoadMaster tube 6,5m with bundle cavity Minimal scratches for LoadMaster tube 6,5m Tube diameter 15mm LoadMaster Tube 6,5 (12mm semi-automatic) Ejection station 3m (incl. conveyor belt) Piece length +1,5m Workpiece tray Nitroline FocusLine ControlLine Laser power control Programmable cutting gas Lens cutting head with 150? focal length SeamLine Tube with interior detection Adaptive clamping technology - feed station Adaptive clamping - sliding chuck - Max. outside diameter of round tubes: 152 mm - Max. outer circle diameter of rectangular tubes: 170 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 4.500 mm - Max. workpiece weight: 20 kg - Laser Output: 2 kW - Laser Type: fiber TruDisk 2001 - Maximum material thickness brass: 3 mm - Maximum material thickness cupper: 3 mm - Maximum material t ...
BOSCH U-HD 500 steam boiler was built in 2017 in Germany by Bosch Industriekessel GmbH. The unit is ideal as a source of high-quality steam for use in both technological processes and for heating purposes. The steam is generated by heating water with gas or oil. The fuel combustion process is environmentally friendly, thanks to a highly advanced torch and firing system that reduces the emission of pollutants. The work chamber, on the other hand, is lined with high-performance thermal insulation materials in order to maintain a constant temperature throughout the entire work cycle. The BOSCH U-HD 500 is operated from a PLC-based control system with the highest level of operating data transparency. The versatility of the machine, combined with its certification in accordance with the Pressure Equipment Directive (PED), makes the offered BOSCH U-HD steam boiler suitable for use in many indu ...
Used machine in good condition. Available for immediate delivery. - Type: TASC 6000 - Pressure force: 86,68 t - Bending length: 2.720 mm - Axes: 6 - Working area: 860 x 2.210 mm - Working speed: 25 mm/seg - Control: 24 - Stroke max: 215 mm - Weight: 8.200 kg - Dimensions (long x wide x high): 3.100 x 1.740 x 2.840 mm
Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Busch, rotary vane vacuum pump -Type: RC 0025 E 501 -Drive: 0.75 kW / 1410 rpm -Vacuum: 20 mbar -Dimensions: 560/440/H340 mm -Weight: 37.5 kg
Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed
Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Max. workpiece weight: 120 kg - Laser Output: 3 kW - Maximum material thickness mild steel: 8 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 4 mm - Control: CNC - Weight: 17.500 kg - Dimensions (long x wide x high): 18.725 x 6.635 x 2.500 mm
Key data: 750 mm, 750 mm, 725 mm
GENERAL Project No.: 905674 Quantity: 1 pcs. Manufacturer: HECKERT (STARRAG) Type: HEC 500 D Control: Siemens 840 D solutionline Year of Make: 2011 Condition: Used machine Layers approx.: 2-3 layers DESCRIPTION MILL Travel in X 750 mm Travel in Y 750 mm Travel in Z 725 mm Max. rapid traverse speed in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 11/14/11 m/s2 Tool holder HSK 63 Max. speed milling spindle 15000 1/min Max. power at ED 10-40/100% 31/– kW Max. torque at ED 10-40/100% 200/– Nm Spindle diameter in the front bearing 75 mm 1 pc. horizontally arranged milling spindle/s Torque support for multi-spindle drill heads Tool magazine 60 stations Max. tool diameter 160 mm Max. tool length 400 mm Max. tool weight 10 kg Chip to chip time 2.7 s Rotary pallet changer 2-fold Pallet size 500×630 mm Max. workpiece weight per pallet 600 kg Rotary ...
Large Format 3000x1500 Sort Master / ToolMaster SheetMaster No Grip or shearMaster - Max. workpiece weight: 220 kg - Punch diameter max: 76,2 mm - Axis speed [Y axis] max: 60 m/min - Control type: Siemens SINUMERIK 840 D - Simultaneous positioning speed (X / Y): 116 m/min - Operating hours: n/a - Axis speed [X axis] max: 100 m/min - Punching force: 220 kN - Working area max: 3.050 x 1.550 mm - Material thickness (punching) max: 8 mm - Power: installed max: 9,5 kW - Weight: 19.300 kg - Dimensions (long x wide x high): 7.600 x 8.171 x 2.072 mm
AVIA FNE 50N CNC milling machine was built in 1998 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is fully operational and has been regularly serviced throughout its service life. The AVIA FNE 50N was designed for precision machining of workpieces made of, e.g. steel, cast iron or aluminium. The machining process is performed inside a large work space by means of a reliable spindle with stepless rotational speed adjustment. When removed from the head, the spindle can operate both vertically and horizontally, with the same parameters. The work table with a length of approximately 1250 mm and a width of 500 mm, on the other hand, has T-slots for easy mounting of workpieces and tooling. All this is complemented by an intelligent HEIDENHAIN controller, offering convenient operation and access to many advanced functions. The AVIA FNE toolroom milling machine weighs 3000 ...
Key data: 500 mm, 125 mm
Safe-Solid-Fast The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2 hand control - Protective shield rigid - 1 meter roller conveyor to the right of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler with scale. - 1 piece of pneumatically swivelling stop with 200 mm Length and control switch on the saw frame - 1 piece HM saw blade 500 mm, Z = 108 Technical data: Maximum Cutting Range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW ...
maximum number of results exceeded
please refine your search
