128,265 used machines on RESALE, but how to find them? Machine Search
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg
High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km
Transnorm conveyor belt GF 4700-600-500 RA2120 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...
roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain
PC CPU, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: PC-CPU-2-083-01-5003 -Type: PC CPU 2083015003 -Number: 1x tax card available -Dimensions: 20/195/H265 mm -Weight: 0.31 kg
Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T
CPU Umlade-Ram auxiliary storage, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5004 -Type: 2083015004 -Number: 3x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg
Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg
Key data: 2500 mm, 1000 mm, 80 mm
Weeke BHX 500 with hedgehog buffer in the inlet Hedgehog buffer with 30 buffer places, length overall: 5700 mm Effective width: 2000 mm Manually movable Weeke machining center with one machining support at the top and one at the bottom Insertion table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS min. workpiece length: 200 mm max. workpiece length: 2500 mm min. workpiece width: 70 mm max. workpiece width: 1000 mm min. workpiece thickness: 4 mm max. workpiece thickness: 80 mm max. workpiece stacking: 2 pcs. Machine Configuration: 2V32 HIGH SPEED 7500 Vertical drilling unit arranged in the upper and lower machining support, each with 32 drilling spindles (individually controllable with variable speed range). 2H8X/2Y Horizontal drilling unit arranged in the upper and lower processing support with 10 over Drill spindles can be called up individu ...
Mill Plus Control Built in 1998 24-fold tool changer Working area 500 x 380 x 380 mm Rapid traverses 10000 m/min Rapid traverse 30 m Direct displacement measuring system Tool holder SK40, ISO DIN 69871 max. spindle speed max. 15000 rpm (Kessler) Angle table 800 x 480 mm, load 500 kg Spindle concentricity 300/0.01 mm Weight 3500 kg Machine dimensions: 2.45 x 1.76 x 2.38 m Coolant Injection El. Handwheel The machine is in very good technical condition. Runs quietly and precisely.
One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet
Fire basket, fire baskets, fire pit, fire bowl -Square -Material: Steel -painted: Black -Number: 2 baskets available -Price: per piece -Dimensions: 500/500/H560 mm -Weight: 22 kg
Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg
Transnorm conveyor belt GF 2250-600-500 RA2056 Technical data: Conveyor length (NL): 2250 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of d ...
Hand wash basin with sink, wash basin -Stainless steel sink -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available -Price: per piece -Dimensions: 700/500/H445 mm -Weight: 9.1 kg
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg
Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg
Transnorm conveyor belt GF 10800-600-500 RA2177 Technical data: Conveyor length (NL): 10800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 10800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...
Position transducer, actuator for valves, valve drive, actuator, servomotor -Type: T 100 a 502 -Weight: 0.3 kg
Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg
Transnorm conveyor belt GF 19000-600-500 RA2170 Technical data: Conveyor length (NL): 19000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 19000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Euro ...
Transnorm conveyor belt GF 2350-600-500 RA2191 Technical data: Conveyor length (NL): 2350 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2350 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0.67 scope of d ...
Transnorm Rising falling Incline belt conveyor GF 4900+4100-600-500 RA2193 Technical data: Conveyor length (NL): 9000 mm ( 4900 mm + 4100 mm ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 9000 ( 4900 + 4100 ) Nomin ...
Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg
Transnorm conveyor belt GF 800-600-500 RA2192 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1,0 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0.67 scope of deliv ...
Transnorm Rising falling Incline belt conveyor GF 6000+3800-700-600 RA2199 Technical data: Conveyor length (NL): 9800 mm ( 6000 mm + 3800 mm ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9800 ( 6000 + 3800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YE ...
AGFA / Siemens X-ray imaging workstation DX-D 500 (digital) with the following system components: Generator Siemens Polydoros IT 80 Tube Siemens SV 150/40/80 HC 0.6/1.0_Bj. 2018 Vertical tripod Siemens Vertix T Fa. Siemens 2x detector VARIAN 4343R CSi_43x43cm Workstation • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • T ...
Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm counters of axes are damaged ? manufacturer don?t supply spare parts Control:SIEMENS 840 C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Made in Germany
Key data: 500 mm, 400 mm, 300 mm
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
used
MASCHINENTYP : TruLaser 5030 Fiber (L41) HERSTELLER : Trumpf BAUJAHR : 2010 BETRIEBSSTUNDEN : NC:57796h Laser Ein: 37360h ARBEITSBEREICH : 3000 x 1500 x 115mm LASERLEISTUNG : 3000W STEUERUNG : Siemens Sinumerik 840D SL STANDARTAUSTATTUNG : • Geschlossener Maschinenrahmen mit integriertem Laseraggregat • Torque Antrieb in Kombination mit Linear Direktantrieben • Geschlossene Strahlführung per Lichtleiterkabel (LLK) • Maschinenkühlaggregat • Integrierte Schaltschränke mit Innenbeleuchtung • Automatischer Palettenwechseler in Längsrichtung • Breites Längsförderband • Arbeitsraumbeleuchtung • Positionslaserdiode • Sprüheinrichtung • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatische Düsenreinigung TRUMPF Laser : • Festkörperlaser TruDisk 3001 mit ei ...
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
Roller conveyor, conveyor belt, roller track -not powered -Roller conveyor: on wheels -Roller width: 500 mm -Transport length: 1500 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Total height of roller conveyor: 210 mm -Dimensions: 1500/625/H210 mm -Weight: 42 kg
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg
We sell here a vacuum sealer from the manufacturer Komet, type S 501 in a very good used and functional condition. The device runs on 400 volts, 3.5 kW, large chamber W/D/H 80/50/23 cm, electric lid opening, Busch vacuum pump 160 cbm/h, fumigation, rollable, workshop tested, ready for immediate use, dimensions W/D/H 100/75/120 cm, others on request.
x-travel: 750 mm y-travel: 750 mm z-travel: 725 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische ...
Universal cutter Make Konrad Ströbel Model 500 Year 1970 Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree shart corner. (Dovrie) Available direct
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg
Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg
Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185/H13 mm -Weight: 1.4 kg
Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. ...
Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...
Vernier caliper, caliper, vernier caliper -Manufacturer: Mauser, calipers, vernier calipers -Measuring range: 0-500 mm -Vernius: 0.05 mm -Dimensions: 655/157/H11 mm -Weight: 1.0 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg
Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 1,6 scope of de ...
Transnorm belt conveyor 650-600-500 RA2194 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1998 Condition: good (used) Motor: fully functional conveying length (FL): 650 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Gearmotor Motor power: kW 0.37 230/400 V 50Hz Conveying speed: contact us Weight: 80 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 650 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktie ...
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tool, step claws, low clamps, clamping irons, clamping brackets -Clamping tool: clamp -Shaft: Ø 40 mm -Dimensions: see photos -Total dimensions: 505/100/H145 mm -Total weight: 12.7 kg
Servo drive, controller, converter, controller, controller adapter base -Manufacturer: Siemens, Controller Adapter Base Series 500 -Type: 500-5840 -Dimensions cardboard: 500/250/H180 mm -Total weight: 2 kg
Used stainless steel belt press made by Flottweg model B-FRU-500 made in 2010. Capacity 500-2000 kg/h. The press includes pulp pump, circulation pump, wash water screen, pressure pump, juiice pump, stationary juice screen, control panel, piping.
maximum number of results exceeded
please refine your search
