rover used for sale

Plate filter with pump Manufacturer: Rover Pompe Type: Colombo Field of use: Olive oil Filter plates: 25 PCs. End plates: Stainless steel Sheet size: 20 cm x 20 cm Pump: Capacity: 28 l / min Conveying height: 22 m Water temp. Max: 35 ° C In very good condition! Plate filter incl. new replacement filter plates and replacement filters!

Biesse Italy, Rover 22 CNC Machining Center Built in 2001 SN 07498 Workspace 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vaccum suction holder 4 pneumatic bakelite rods for lifting the plate Vertical electric spindle 7.5 kW with automatic tool change, ISO 30 cone Automatic tool change 7 positions on the working head Drill head with 20 spindles arranged as follows: 7 vertical in X-axis 7 permeable to Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Groove saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical information subject to reservation

Make : Roversi Tank Volume :3000 liters Cream Capacity : 1000 Litres to 1500 Litres Double jacketed Kneading Rolls inside the barrel Control panel Stainless steel production area Skid Mounted 2 Door Safety closer See through glass Fully Refurbished on order Manufacturer Roversi Model 3000 L

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.

This 5-axis BIESSE Rover A4.30 was manufactured in 2010. It features a working field of 3,060 mm in the X-axis and 1,320 mm in the Y-axis, along with a powerful 12 kW air-cooled electrospindle. The machine includes advanced programming with BIESSEWORKS and a revolving tool changer with 10 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A4.30 machine we have for sale. Contact us for further details.

This 4-axis BIESSE Rover K1232 was manufactured in 2017. It features an extensive X-axis working range of 3,260 mm and a Y-axis working range of 1,260 mm. The machine is equipped with a tool magazine capacity of 16 positions and an electrospindle power of 19 kW. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover K1232 CNC processing center we have for sale. Contact us for further details.

Processing Manufacturer: Biesse Model: Rover 335 ATC Working range: approx. 3200mm x 950 mm Drilling spindles vertical: 24 pcs. Drilling spindles horizontal: 10 pcs. Milling unit: 7.5 KW

Norpak Rover150 label applicator label applicator, variable speed head, max label width 110mm, with food pedal, 1Ph

Manufacturer: Biesse, Type: Rover 23, Year: 2000, Control: yes, Working range X: 2900, Working range Y-axis: 1300, Working range Z: 140, Milling engine 1 hours power: 7,8, Vertical drills-X: 10, Horizontal drills-X: 6, Weight approx. kg: ca. 3500, Year :2000

Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible.

Manufacturer: Biesse , Type: Rover 24, Year: 2002, Software: Compass kann mit gekauft werden, B-axis: 100/50/20, Maschinensteuerung: 6170, Programming station office: 1380, Work piece width min-max mm: 150, Min.-max. workpiece length in mm: yes, Aluminium processing: 1, Throuh running machine: HSK F-63, Feeding speed max m/min: 7.5, Pendulum processing: 1800-24000, Number of milling spindles vertical: 1, Tool adaption system: 24, Milling engine 1 hours power: 8, rpm 1): 7, Milling engine 2 hours power: 4, rpm 2): 2, Working widht max mm: 2, Vertical drills-X: 10, Drill vertical Y: yes, Horizontal drills-X: yes, Drill horizontal Y: 100, Aluminium sleeking table: yes, 4 station allocation: yes, Rigging support table: yes, Edgeband hight mm: yes, Radial arm machine: 1 Winkelgetriebe, machine ready for demonstration: Deckenlaser und Hubschwingen, Year :2002

Manufacturer: Biesse Model: ROVER A FT 1224 CNC Year of Manufacture: 2021 Type of Machine: Numerically Controlled Machining Centre Operating hours: 1238 h Spindle / 42 h Drill heads Weight: 350 kg Power Supply Voltage: 400 VAC Full Load Current: 53 A Number of Phases: 3 Power: 31.20 kW Frequency: 50 Hz Short Circuit Rating: 10 kA RMS Sym Find more here - / Contact us at -

Manufacturer: Biesse, Type: Rover A 1532, Year: 2019, Control: NC BH660, Software: Telesrvice, Working range X: 3140, Working range Y-axis: 1560, Working range Z: 200, C axis: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 13,2, rpm 1): 1000-24000, Tellerwechseler: 8, Pickup Wechlser: 16, Vertical drills-X: 17, Drill vertical Y: 11+6, Horizontal drills-X: 5, Drill horizontal Y: 3, Traverse table: 6, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Year :2019

Key data: 3060 mm, 1260 mm, 150 mm

SPECIFICATIONS: Workspace: X: 3060 mm Y: 1260 mm Z: 150 mm 03 Axles Automatic lubrication system 06 ATS tables (length: 1200 mm) 018 Track rollers 06 rear stops 06 stops at height 970 mm Side stops (2 right + 2 left) 04 Bar lifter Turret tool magazine with 10 places 01 Drill head BH 21 L (7x+7y vertical - 4x+2y horizontal - x-axis knife) 01 Air Cooled 12kw Electrospindle HSK F63 Coupling 01 Becker vacuum pump: 100 m³ SYSTEM: Biesse Works XP600 Controller EQUIPMENT: Carpets and barriers Various tools

This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information.

Manufacturer: Biesse Rover A Nesting, Type: Rover A Nesting, Year: 2020, Control: Biesse, Working range X: 3140, Working range Y-axis: 1580, Working range Z: 230, C axis: yes, Number of milling spindles: 1, Number of milling spindles vertical: 1, Milling engine 1 hours power: 12, rpm 1): 1800-2400, Number of tool changers: 1, Tellerwechseler: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Saw unit: yes, Portal machine: yes, Werkstückspannsystem: Vakuum, machine ready for demonstration: yes, Automatic setting up table: yes, Charging system single-sided: Hubtisch, FREE TEXT: Entladeband + zusätzlicher Werkstückreinigung/genaue Maschinentechnik kommt noch, Year :2020

This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5 LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information.

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011

Manufacturer: Biesse, Type: Rover 6.50 5-Achsmaschine conf.2, Year: 2006, Software: Editor 2.2.1.273, Working range X: 4600, Working range Y-axis: 1535, Working range Z: 230, C axis: yes, B-axis: yes, Programming station office: möglich, Number of milling spindles: 1, Milling engine 1 hours power: 12, rpm 1): 1500-2400, Kettenwechsler: yes, Number of tools per tool-magazine: 14, Mitfahrender Werkzeugwechsler: yes, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 120, Rigging support table: yes, Tool clamping system: HSK-63 F, Saw unit: yes, Radial arm machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, machine ready for demonstration: yes, Zentralschnierung: yes, Presentation possible: yes, Year :2006

Manufacturer: Biesse Rover A, Type: Rover A, Year: 2008, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 145-3685, Min.-max. workpiece height in mm: 6-80, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 12, U/min 1): 1500-24000, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 7, Drill vertical Y: 8, Horizontal drills-X: 4, Drill horizontal Y: 2, raster table: yes, 2 Platzbelegung: yes, Anschläge im Tisch vorne: yes, Vacuum pumps m³/h: 250, Tool clamping system: HSK F 63, Drill vertical: 15, Saw unit: yes, Year :2008

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.

This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details.

Code: 0420 Brand: BIESSE Model: ROVER 13 - CE Standard CNC Working center with 3 controlled axis for furniture, custom-made furniture , panels, kitchens, wooden doors and various - CE Standard Working area X axis mm 1600 Working area Y axis mm 850 Stroke Z axis mm 70 X axis speed 75 mt/min Y axis speed 60 mt/min Z axis speed 15 mt/min Milling group Kw 2,2 18.000 rpm Vertical boring unit 8 spindles Horizontal boring bits X nr. 2 Horizontal boring bits Y nr. 2 Tool shank diameter 10 mm Spindle rotation speed 4000 rpm Blade group for milled diameter mm 120 Work table: 4 bar plans Vacuum pump 40 m3/h Total power Kw 10 Numerical control NC 400: 6-inch alphanumeric and high-resolution colour graphic display Full-coverage safety cabin Compressed air 6 atm Machine overall dimensions mm 2450 x 1550 x 1900 h Overall dimensions with guard mm 3500 x 1900 x 2000 h Weigh ...

This 3-axis BIESSE ROVER 20 CNC Wood Machining Centre was manufactured in 2006. It features a working area of approximately 3060 × 1260 mm and a powerful 7–9 kW HSD electrospindle with speeds up to 24,000 RPM. The machine is equipped with an 8-position rear tool changer and offers various table types for versatility. If you are looking to get high-quality wood machining capabilities, consider the BIESSE ROVER 20 machine we have for sale. Contact us for further details.

This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine.

Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit PLC for control of the machine cycle

This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details.

This 5-axis BIESSE Rover A Edge 1643 was manufactured in 2017. It features a versatile CNC machining center with an edge banding unit, ideal for various applications. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover A Edge 1643 machine we have for sale. Contact us for further details.

This 4-axis BIESSE Rover K 1532 G was manufactured in 2014. It is a used CNC machining center designed for precision and efficiency. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover K 1532 G machine we have for sale. Contact us for further details.

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit

This range rover recently got new turbos and then the engine broke down. So I am sold with a defective engine Auction-ID: A1-40285-7

Equipped with: cruise control, panoramic roof, sliding canopial roof, navigation system, running boards, starry sky, black grill, sound box, Harman kardon sound system, parking sensors, reversing camera, all details in black, luxury version Auction-ID: A1-47407-4

Beautiful full Range Rover convertible, equipped with Meridian sound system, tow bar, aluminum rims, reversing camera, leather upholstery, Auction-ID: A1-47408-169

• Total installed power 14 KW. • Working area approx. 2700 x 950 mm. • Passage height on panel 60 mm. • Programmable maximum speed in x-y-z directions: 75-75-15 m/min. • Vertical milling unit, 5.50 KW-max motor. 24000 rpm, manual tool change, ISO 30 connection. • Saw group for grooving in the direction of the X-axis. • Vertical holes in the x-axis direction: 8. • Vertical holes in the y-axis direction: 5. • Horizontal holes in the x-axis direction: 2 + 2. • Horizontal holes in the y-axis direction: 1 + 1. • 6 benches with 2 suction cups each. • NO vacuum pump. • The tools that appear in the photographs are NOT included. • IMPORTANT: This machine does not work. It gives an error when loading the operating system. Ideal for spare parts. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dism ...

Rover Mini Cooper 1.3i E2 Registration date: 18.06.1993 1,275 cc petrol engine Power: 46 kW (63 hp) Manual transmission Mileage read: 19,764 km Chassis number: SAXXNNAYNBD064177 Color: Green with white roof Left-hand drive 4 seats Wooden dashboard Wooden sports steering wheel Fabric equipment Red carpeting in the interior Towing capacity braked: 410 kg Towing capacity unbraked: 250 kg Curb weight: 635 kg Dutch vehicle documents available RDW approval document available RDW test report available Key provided Classic Mini with characteristic features Auction-ID: A1-48285-8002

- Engine: 300 TDi 4 cylinder diesel; - 1st hand; - Directly from the army of the British army; - RHD / RHD; - Spare wheel (side); - AHK; - Former ( GS ) General Service vehicle; - Reinforced frame for heavier loads ( Extra Duty ); - Various holders on the bonnet for spades, camouflage net trays, etc.; - Folding windshield; - Side bench seats at the rear; - Fuel tank storage compartments with square storage compartment flaps on both sides of the vehicle; - Soft-top version: tarpaulin made of plastic; - 24-volt on-board electrical system (sometimes with a second 48-volt alternator for the radio system); - reinforced axles (base: Range Rover P38a); - Military bumper with front open-end coupling; - Goodyear G 90 tyres, good ! (approx. 60 - 70 % ); - Date in Service - Certificate is provided; - No German registration; - Condition see photos; Auction-ID: A1-48781-2

- Sold as a spare parts dispenser; - Not complete, see photos!; - Engine: 300 TDi 4 cylinder diesel; - from 1st hand; - Directly from the army of the British army; - RHD / RHD; - AHK; - Former TUM HS FFR vehicle; - Reinforced frame for heavier loads ( Extra Duty ); - Various holders on the bonnet for spades, camouflage net trays, etc.; - Folding windshield; - Fuel tank storage compartments with square storage compartment flaps on both sides of the vehicle; - 24-volt on-board electrical system; - reinforced axles (base: Range Rover P38a); - Military bumper with front open-end coupling; - Date in Service - Certificate is provided; - No German registration; - Not ready to drive!; - Condition see photos; - Viewing recommended; Auction-ID: A1-48781-3