rotox gmbh germany used for sale

Turning diameter: 6400 mm Center distance: 18000 mm Spindle bore: 220 mm Numbers of bed guide ways: 0 Weight between centres maximum: 80000 kg MACH-id   4069 MAKE       Zerbst Germany TYPE         DXP 5 YEAR         1987 SPECIFICATIONS Swing in the gap Ø   6400 mm Distance between centres    18.000 mm Work piece weight      80.000 kg Spindle bore    220 mm Spindle speeds / ranges    22,4 Rpm Power    70 Kw DIMENSIONS Length    25.000 mm Width     15.000 mm Height    10.000 mm

Vertical turret lathe FKD 40 CNC with Y-axis and CNC Rotary milling head (A-axis) Faceplate diameter 4000 mm Turning diameter: 8000 mm Turning height: 3000 mm Slide cross section: 300 mm x 300 mm Stroke: 3000mm X-axis: travel 5000 mm Z axis: travel 2000 mm Y-axis: travel 6000 mm W-axis: stroke 1500 mm C-axis in face plate table A-axis milling head Control: Siemens 840 DSL Tool changers: 60 seats PickUp station: 5 places

Turning diameter: 1400 mm Turning height: 600 mm Chuck diameter: 1400 mm Number of chucks: 1   CNC Brand: Fagor CNC Model: 8055 MACH-id    3988 MAKE         Hegenscheidt Germany TYPE           RQ YEAR          Overhauld 2006 SPECIFICATIONS Controll    Fagor 8055 Max. turning diamter Ø    1400 mm Table / chuck size Ø     1400 mm Workpiece height     600 mm Work piece weight    2000 Kg Singel column or double column   Single column Spindle speeds / ranges   2 steps - 224 Rpm Power   50 Kw DIMENSIONS Length    3800 mm Width      3500 mm Height     3500 mm In 2006 Rebuild:Control Fagor 8055 CNC Rittal Electric cabinet New cable  ...

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Capacity: 12 t Table length: 2000 mm Table width: 0 mm Stroke: 2000 mm CNC Brand: _Unknown / Other CNC Model: Leonard en Bauer MAKE   ARKU Germany TYPE    VRM 200/7/2000 + AH 1200/2000/MSG-4Q YEAR   1990 SPECIFICATIONS Controll   Leonard + Bauer Throat     2000 mm Maximum sheet thickness Steel   6,3 mm DIMENSIONS Length   6000 mm Width     4500 mm Height    3000 mm ARKU De-Coil & Straightener 2000 x 6,3 mm   Make           : ARKU Germany Typ              : VRM 200 / 7 / 2000 Serial No    : WO 1576 Age              : 1989 in Work 1990  ARKU Precision s ...

Table length: 1200 mm Table width: 600 mm Longitudinal X: 1000 mm Cross Y: 600 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Dialog 11 MAKE  Deckel Germany TYPE    FP 6 - 100 YEAR   80 er SPECIFICATIONS X - Travel   1000 mm Y - Travel     600 mm Z - Travel     500 mm bed / plano / portal / moving column   Universal CNC milling machine Controll   DIALOG 11 Table Length x Width    1200 x 600 mm Table load in kG   600 Kg Spindle Taper   Sk 40 kW power on spindle   11.5 kW Spindle speeds / ranges   5000 Rpm Number off controlled axis   3 DIMENSIONS Length    4000 mm Width      3200 mm Height    2850 mm  

Other Info: CNC Double Coloumn Measuring machine MAKE   ZEISS West Germany TYPE    UMC 850 S YEAR   1995 DIMENSIONS Length    2400 mm Width     1900 mm Height    3050 mm X Travel      : 1.400 Y  Travel      : 1.200 Z Travel      : 600  Distance between column : Vertical daylight   :    780 Table length         : 2.120 Table width          : 1.400  Over all dimensions  Length        : 2.200 Width         : 1.900 Height        : 3.030 Weight       : 3. ...

Extruder KE 90 x 30-D for manufacturing of von TPE foam and compact profiles screw diameter: 90 mm L/D ratio 30:1 (2700mm) extruder with 11 temperature-controlled zones (electrically heated by fluids) Siemens electric drive, motor 45kW at 2500rpm year of construction 1996, machine in very good condition (preliminary used in test operations) melt application device (gear pump) double profil head (also used for extrusion-coaded framework belts) electric equipment partially available extruder mounted on movable baseplate

Table length: 700 mm Table width: 700 mm Longitudinal X: 850 mm Cross Y: 700 mm Vertical Z: 500 mm Positions ATC: 75   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MAKE   Hermle germany TYPE    C  40U + PW 160 YEAR   2004 SPECIFICATIONS X - Travel   850 mm Y - Travel   700 mm Z - Travel    500 mm Controll   Siemens 840D Table Length x Width   700m x 700 mm Table load in kG    800 Kg Spindle Taper    HSK 63 kW power on spindle    15 kW Spindle speeds / ranges    18000 Rpm ATC tool changer  75 ( 32 + 43) Coolant true spindle / Bar   40 Bar Number off controlled axis   5 DIMENSIONS Length    10000 mm Width      6000 mm Height     3400 mm

Strapex apparatus Plastic band seals L x W x H: 80 x 40 x 100 cm Weight approx. 70 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table length: 630 mm Table width: 630 mm Longitudinal X: 650 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 75   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MAKE   Hermle Germany TYPE     C30U Dynamic YEAR    2008 SPECIFICATIONS X - Travel   650 mm Y - Travel   600 mm Z - Travel    500 mm Controll    Siemens 840D Table Length x Width   630 mm Table load in kG   800 Kg Spindle Taper   HSK 63 Spindle speeds / ranges  28000 Rpm ATC tool changer   75 ( 32 + 43) Coolant true spindle / Bar    40 Bar Number off controlled axis  5 DIMENSIONS Length   4100 mm Width     3000 mm Height    3200 mm  

Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Magurit Unicut 555 frozen meat cutter / dicer, with lift, cutting dimensions up to 480 mm x 250 mm x 650 mm, processing temperature -25°C, knife head with 18 knives You are very welcome to test the machine in our facility in Koblenz, Germany.

Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table length: 630 mm Table width: 630 mm Longitudinal X: 650 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 75   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MAKE  Hermle Germany TYPE    C 30 U YEAR   2010 SPECIFICATIONS X - Travel   650 mm Y - Travel   600 mm Z - Travel   500 mm Controll    Siemens 840D Table Length x Width   630 mm Table load in kG   800 Kg Spindle Taper   HSK 63 Spindle speeds / ranges   18000 Rpm ATC tool changer   75 ( 32 + 43) Coolant true spindle / Bar   40 Bar Number off controlled axis   5 DIMENSIONS Length   4100 mm Width    3000 mm Height    3200 mm

K + G wetter SM 120 STL, 120 litres cutter, membrane keyboard, variable knife speed, 2 bowl speeds, mixing speed forward and backward, S + S knife head with 6 blades, unloading device, hydraulic loading device. You are very welcome to test the machine in our facility in Koblenz, Germany.

Kilia grinder and paddle mixer Leopard G-160 / 500 ltrs., combination consisting of 500 liters paddle mixer and 160 mm grinder, with loading device. You are very welcome to test the machine in our facility in Koblenz, Germany.

Table length: 630 mm Table width: 630 mm Longitudinal X: 650 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 75   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MAKE   Hermle Germany TYPE    C 30 U Dynamic YEAR    2011 SPECIFICATIONS X - Travel   650 mm Y - Travel   600 mm Z - Travel   500 mm Controll  Siemens 840D Table Length x Width   630 mm Table load in kG   800 Kg Spindle Taper   HSK 63 Spindle speeds / ranges   28000 Rpm ATC tool changer   75 ( 32 + 43) Coolant true spindle / Bar   40 Bar Number off controlled axis   5 DIMENSIONS Length   4200 mm Width    3000 mm Height   3200 mm  

Karl Schnell KS FD 175 Type 112 Emulsifier, 37 kW, 175 mm, hopper capacity 140 liters, output 2500 kg/h, 2955 rpm. You are very welcome to test the machine in our facility in Koblenz, Germany.

Seydelmann frozen meat grinder GW 300, all stainless steel, for frozen block up to -25 degrees, measurements max. 900/500/150 mm, hopper capacity approx. 450 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.

Spindle diameter: 130 mm Cross X: 2000 mm Vertical Y: 1600 mm Table length: 1400 mm Table width: 1120 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Siemens CNC Model: 840 D - 5 Axis MAKE   WOTAN Germany TYPE     Rapid 2 YEAR    200. SPECIFICATIONS Controll    Siemens 840D - 5 Axis Floor or table type borer    Table type borer X - Travel    2000 mm Y - Travel    1600 mm Z - Travel      800 mm W - Travel    1000 mm Spindle Diameter Ø    130 mm Spindle Taper    ISO 50 kW power on spindle    40 kW Spindle speeds / ranges   2000 Rpm Table Length x Width     1400 x 1120 mm Table load in kG     6000 Kg Number off controlled axis   5 DIMENSIONS Length    5000 ...

K+G Wetter Mixer-Angle-Grinder E 130 mm type 279 with loading device, capacity of hopper (with hopper attachment) 245 l. You are very welcome to test the machine in our facility in Koblenz, Germany.

Magurit Fromat 042 frozen meat cutter with lift, cuttung dimensions up to 480 mm x 250 mm x 750 mm, cutting temperatur up to -25°C, capacity up to 1,500 kg/h, 4 kW You are very welcome to test the machine in our facility in Koblenz, Germany.

Table length: 3900 mm Table width: 1500 mm Longitudinal X: 3800 mm Cross Y: 1500 mm Vertical Z: 650 mm Positions ATC: 52   Distance between uprights: 2210 mm CNC Brand: Heidenhain CNC Model: TNC 426 MAKE   AXA Germany TYPE    UPFZ 40 YEAR   2001 SPECIFICATIONS X - Travel    3800 mm Y- Travel     1500 mm Z - Travel     650 mm bed / plano / portal / moving column   Portal milling Controll    HeidenHain TNC 426 Table Length x Width    3900 x 1500 mm Spindle Taper    Sk 40 kW power on spindle  20 / 100 % or 30 / 40 % kW Spindle speeds / ranges  100 - 15000 Rpm ATC tool changer   52 Number off controlled axis   5 Axis CNC Automatic milling head / Gr.    2.5 Gr .Distance between columns    2210 mm DI ...

Capacity: 250 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm Make : MFD HOESCH - Germany Typ     : PR 250 / 1000 Age     : 1992  Height of centre :   500 wheel Ø          : 1.000 mm pressing force       :   250 ton  cylinder stroke : 500 mm Cylinder Ø : 300 mm Cylinder piston Ø : 270 mm  working force: 360 bar Pressing speed : 0 -    80 mm/min Pinole feed : 0 –  1300 mm/min Return speed : 0 –  1300 mm/min  Centring device Centre angle : 90° Pinole diam. Ø : 100 mm Cylinder diam. Ø : 110 mm Pinole stroke : 500 mm Recently retrofitted Kuenstler Bahntechnik New PC for making marking & measuring protocolcalibration system Big package with differen ...

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter Electric-Grinder D 114mm with sorting device, year 2007, with unger cutting system. You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Magurit Fromat 042 profi frozen meat cutter with lift, cuttung dimensions up to 480mm x 250mm x 750mm, cutting temperatur up to -25°C, capacity up to 1,500 kg/h, 4kW. You are very welcome to inspect the machine in our facility in Koblenz, Germany.

Düker Rex mixer-automatic grinder D 114 mm, type AW 114. You are very welcome to test the machine in 56070 Koblenz, Germany.

Capacity round maximum diameter: 300 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id  3557 MAKE   Muller Germany TYPE   HBA 400 S YEAR   10 / 2003 SPECIFICATIONS Bandsaw / Circelblade / Automat    Bandsaw automat Angle L / R Degrees   90 Gr Cutting capacity 90 ˚ Ø   300 mm Cuttting capacity 90 ˚ Flatt   400 x 320 mm blade dimensions   4400 x 34 x 1,1 mm Cutting speed M/min15 - 105 M/min DIMENSIONS Length    1800 mm Width    2250 mm Height   1500 mm

Weber ASB 400 skinner, cutting width 400mm, can be used (open) as combination machine with carriage table or (closed) with pressing unit and conveyor. You are very welcome to inspect the machine in 56070 Koblenz, Germany.

Alexanderwerk grinder D 114 mm, stainless steel. You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Capacity round maximum diameter: 400 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id  3509 MAKE   Kasto Germany TYPE   Twin A4 YEAR  2006 SPECIFICATIONS Bandsaw / Circelblade / Automat  Bandsaw Angle L / R Degrees   0 Gr / Straight cutting Cutting capacity 90 ˚ Ø  400 mm Cuttting capacity 90 ˚ Flatt  400 x 400 mm blade dimensions5700 x 41 x 1.3 mm Cutting speed M/min   20 - 110 M/min DIMENSIONS Length   2980 mm Width   2700 mm Height  2200 mm

Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Generator of the Jenbacher 312 Newage engineers GmbH 664 kW 800 kVA Can we gladly create an offer of a generator maintenance

Capacity round maximum diameter: 810 mm Angle degrees maximum: 480 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   3542 MERK  Knuth Germany TYPE  HB 810 L YEAR   2008 SPECIFICATIES  Circel / Band zaagVol / Half automaat  Bandsaw Verstek zagen links en rechts ˚Graden  ANgle cutting 45 Gr .Capaciteit bij 90 ˚ Graden rond Ø  810 mm Capaciteit bij 90 ˚ Graden plat  810 x 850 mm Capaciteit bij 45 ˚ Graden rond Ø  810 mm Capaciteit bij 45 ˚ Graden plat  480 x 850 mm Zaag blad / band afmeting  8200 x 41 x 1,3 mm Zaag snelheid M/Min. 20 - 100 M/min AFMETINGEN Lengte  3900 mm Breedte  1200 mm Hoogte 3350 mm  

Alexanderwerk HTC 65, 65 Liters bowl cutter, stainless steel Version, 2 knife speeds, 2 bowl speeds, 2 mixing speeds vorwards and reverse You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Kilia vacuum bowl cutter, year of manufacture 2010, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, variable bowl speeds, mixing speed, hydraulic loading device for 200 liter bins, hydraulic unloader, You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Dough dividing and moulding machine Model: TTW30 - Z Size: 3 30 / 100 g 4 40 to 120 g NEW MACHINE 2 years warranty Delivery: free House, within Germany

Table diameter: 3200 mm Turning diameter: 5100 mm Turning height: 2650 mm Motor power: 75 HP/kW Positions ATC: 16   Positions APC: 0   CNC Brand: Siemens CNC Model: Sinumerik System 8 Make CNC Dorries Type CTE 320 / 3400 CNC Siemens Sinumeriek Year 1981 - Ex Aerospace Dorries cte 320 Centre height (mm) Chuck 3200 mm Center distance (mm) Max swing 5100 mm Spindle bore Height 2650 mm Table load 60 Tons Toolchanger 16 Positions Speed 100 Rpm / 6000 feeds  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dörries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2 : 5.100 - Max. turning height : 2.650 - Slide adjustment : 2.000 - Stroke Tool holder : 1.250 - Cross r ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Turning diameter: 1300 mm Turning length: 4500 mm Turret positions: 1 Positions ATC: 142   Number controlled axis: 7   CNC Brand: Siemens CNC Model: 840D NILES SIMMONS N50/2 MC  TURN MILL DRILL MACHINING Make            : NILES SIMMONS Germany Typ            &nbs p; : N 50 / 2 MC x 4500 Age            &nbs p; : 2008   Swing over slide              : 1.250 Swing over bed               : 1.300 DBC turning length          : 4.500 Spindle bore     &nb ...

Iveco emergency generator 190 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - 6 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 180 / 200 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 335 x 116 cm - Weight: 1980 kg - Tank volume: 400 liters - Sound level: approx. 67 dB (7m) - Consumption: 18.6 l/h (50%) / 27.9 l/h (75%) - - - - - Scope of delivery: - Iveco generator set 175 / 192 kVA - in soundproofed housing - with digital control - integrated frame tank - Battery -  ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Yanmar Diesel Generator Set 16 kVA - NEW + + E-Start - AVR - Water Cooled + + - - - - - Engine: - Manufacturer: Yanmar (Italy) - Model: 3TNV70 - 2 cylinders - Diesel - Water-cooled - Power: 22 hp - 872 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 16 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 130 x 70 cm - Weight: 485 kg - Consumption: 3.1 lt ...

Kohler Diesel Generator Set 20 / 22 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 32A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 140 x 70 cm - Weight: 450 kg  ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...

Iveco emergency generator 135 kVA + + NEW - Year of construction 2022 + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 125 / 138 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital start unit - with automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Engine monitoring - Operating hours counter - Maintenance timer - integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1470 kg - Tank volume: 290 liters - Sound level: approx. 68 dB (7m) - Consumption: 14.4 l/h (50%) / 20.2 l/h (75%) - - - - - Scope of delivery: - Iveco generator set 125 / 138 kVA - in soundproofed housing - with digital control - Tank - Battery - Exhaust / silencer - - - -  ...