rotox gmbh germany used for sale

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

We offer 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 17.70 mm Pin diameter: 7.86 mm Weight: 0.030 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Vacuum stuffer Handtmann VF 100, vacuum filling machine for filling, portioning, linking, loading device, mc control, body all stainless steel, filling performance 3000 kg/h, pressure up to 55 bar, 420 port./min. You are very welcome to test the machine in Koblenz, Germany.

Spiral mixer BOKU, type: Th SK 240-áberholt-- incl. 3 retractable boiler â for up to 240 kg dough - including delivery. The machine is being over Germany after order confirmation.

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

We offer you 10 used safety pins manufacturer Stow for purchase. - incl. shipping throughout Germany - Technical data for the locking pin: Shelving system: Stow Type: Pal Rack NS Included are: 10x Safety pins used Material color: complete. galvanized Weight: 0.020 Kg / Pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Glue press Etienne Format L x B: 3800 x 2700 mm Window frame press pneumatic Weight approx. 890 kg Year of construction 1980 The press is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

- Manufacturer: VEB Watch Combination Ruhla / Germany - Model/Type: FUW 315/III - electric connection: 3 x 380V 50Hz 27.2A - electrical power consumption: 7.8 kW travel distance in X-axis approx. 500 mm travel in Y-axis approx. 520 mm travel distance in Z-axis approx. 440 mm working table Clamping area 315 x 1000 mm table load 150 kg tool holder 2 spindles: ISO 40 - Speed 2 spindles: 35-1800 rpm continuous adjustment Horizontal spindle path: 280mm - Vertical spindle path: 80mm ; ready for use

Stone grinding machine Wenzler CH Bottighofen UI 56 Masch. No. 1490 Grinding wheel á 400 mm Table length 3000 mm Table width 1000 mm Table height 700 mm Engine 15 kW Unit 90 ° swiveling Hydraulic table feed Height adjustment, side adjustment electric L x W x H: 820 x 130 x 260 cm Weight approx. 6000 kg Built in 1956 The machine is in good condition, ready to use. From space, removing by buyer. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Band saw Kirchner Roll á 800 mm Cutting height 300 mm L x W x H: 130 x 80 x 230 cm Weight approx. 750 kg Built in 1944 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...

- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...

Machining Center - Universal HURON KX 15 Bearing No. 1105-01908 Make Huron Type KX 15 Built in 2002 Condition Used machine Control CNC SIEMENS 840D POWERLINE Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 800 mm y-way 1000 mm z-way 550 mm Spindle holder ISO SK 40 Spindle speeds 18000 rpm inner cash supply 30 bar b-axis +20/-100 c-axis 360 Control SIEMENS 840D POWERLINE Factory weight 500 kg Number of tools in the magazine 30 pieces Total power requirement 53 kW Description - 5 AXIS UNIVERSAL MACHINE CNC control SIEMENS 840D Tool changer 30 pcs SK 40 5 axes simultaneously C-axis 360 , A-axis +20/ - 100 " , TABLE BY 630 mm, 30 BARS IKZ additional, accessories SPAENEFOERDERER

Pendulum saws Bacus for wall mounting Saw á 500 mm Built in 1982 L x W x H: 70 x 60 x 100 cm Weight 370 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

tahlkonsole with height adjustable table Table 720 x 500 mm, thickness 8 mm Weight 20 kg Built in 1975 The console is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

Duker Rex RK 45, 45 liters bowl cutter with brand new noise reduction cover, 2 knife speeds, mixing 2 speeds, 2 separate bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

Worker-Federhenn pneumatic Cap scissors with table on casters to abbreviate window hardware L x W x H: 170 x 70 x 135 cm Weight approx. 100 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Renner compressed air tank Product description: Compressed air tank lying down Manufacturer: Renner SKU: 02280 Built: 2018 Condition: New device technical details: • Volume: 90 litres • max pressure: 11 bar • Compressed air output: G1 inches • Weight: 36 kg • powder-coated outside • Tmax: 100°C • Pieces: 4 pieces in stock High-quality compressed air tank Made in Germany (BWB container factory), with test certificate. metrics: • L x W x H: 970 x 290 x 410 mm Our price: 249,00 € (EUR) FP plus VAT from the grunow location (Brandenburg) (Changes and errors to technical data and prices reserved!)

Handtmann VF 620 vacuum filling machine with linking gear box, filling, portioning, linking, monitor control, with loading device for 200 liter standard trollies. You are very welcome to test the machine in our facility in Koblenz, Germany.

MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

TECHNICAL SPECIFICATIONS Manufacturer: BÖHRINGER (Germany) Name: Impact crusher Type: PB 1300 x 1200 Year of construction: 1978 Weight: approx. 26,000 kg Drive line: 200 kW Drive type: V-belt Throughput: 200 - 300 t/h Inlet opening (width / height): 1,330 mm / 1,500 mm Maximum task size: approx. 1,000 mm Number of impact strips: 3 pcs. Rotor diameter: 1,200 mm Rotor width: 1,300 mm TECHNICAL SPECIFICATION Manufacturer: BÖHRINGER (Germany) Description: Impact crusher Type: PB 1300 x 1200 Year of construction: 1978 Weight: approx. 26,000 kg Drive power: 200 kW Type of drive: V-Belt Throughput: 200 - 300 t/h Feeding opening (width / height): 1,330 mm / 1,500 mm Feeding size: approx. 1,000 mm Number of rotor ledges: 3 Pcs. Rotor diameter: 1,200 mm Rotor width: 1,300 mm

Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Roller conveyor for frame saw to cross off promotion L x W x H: 150 x 230 x 100 cm Weight approx. 6000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

machine measurements: 1800 x 2300 x 2300 mm machine weight: 1800 kg power capacity: -- kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type water circulation cooling unit Merkle brand Type WK 370 Plant No. 38.118 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 700 x 370 x 285 mm Weight 28 kg Age approx. 10 years Condition workshop tested very good Warranty 12 months from the date of delivery Original price 1.200,00 € + VAT Price 675,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our ...

Cross off feed for roller conveyor L x W x H: 400 x 230 x 80 cm Weight 4000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine type water circulation cooling unit Merkle brand Type WK 230 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 610 x 230 x 215 mm Weight 18 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine type water circulation cooling unit Merkle brand Type WK 200 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 590 x 200 x 210 mm Weight 15 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

Saw mill vertical Boegli Weight 4000 kg L x W x H: 200 x 160 x 330 cm Roll diameter 1250 mm Stem á 1.2 m, with mechanical clamping cars 9 m Chuck Wagon L x W x H: 900 x 200 x 170 cm Weight approx. 6000 kg Built 1952 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Autoclave TANK, Type: 340E -New- The autoclave was only used for 5 cookings at our customer's site. Electric autoclave with 340 litre boiler volume, reinforced quick-release fastener and threaded spindle - Made in Germany For sterilization, pasteurization and preservation. - Completely made of high-quality stainless steel - All safety equipment (latest requirement of the Pressure Vessel Ordinance) - All. Safety equipment, such as safety valve, pressure gauge, overheating protection, steam drain tap, safety outlet tap, etc. - Construction inspection and pressure test by TÜV included - Incl. all required certificates - Fully autom. Control by F-value controller - Fully autom. Control of operating temperature, core temperature, preselection and operating time clock - Content: 340 liters - Double jacket heating via built-in steam generator - Heating type: Electric, 27 kW, ...

Complete printshop from one place in germany: Manufacturer: Ryobi 5 colors Model: 755 (S-5-A) Year: 03-2006 Equipment: aut. Print provision, pallet feeder, oscillating FA IVS equipment, Spectro Pro densitometer serial no. B201004, plate punch Beil, Connection for Foellmer counting tape inserter OK-90 Possibly. Number of prints: 38 million Availability: spring 2021 Price expectations: Defects: none, regular maintenance Manufacturer: Horizon Model: VAC-100A, SPF-200A HMU-100, ST-40, FC-200A, SC-200 Year: 04/2008 Equipment: Small format equipment MS-100, additional blower f. VAC-100, stacking lowering table, manual system HMU-100 Availability: spring 2021 Defects: none Manufacturer: Polar 92 Model: XT Year: 02-2007 Availability: spring 2021 Defects: none, regular maintenance Manufacturer: Horizon folding machine Model: AFC-504AKT Year: bought used 04 - 2009  ...

K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type MobiTIG 180 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 180 amps Duty cycle 20 % ED at 180 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 18 months warranty 1 piece instruction manual List-Werks-Price ex stock  ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1  ...

K+G Wetter SM 90 STL bowl cutter, 90 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife speed up to 5,000 rpm., 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse (40-500 UpM), temperature switch off function, knife head with 6 knives, power 32 kW. You are very welcome to test the machine in our facility in Koblenz, Germany.