We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,436 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
New machine GSL 180/430 Rotor diameter 180mm Rotor width 430mm Drehzal 150 min. Drive 4 kW Rotor blade 45 pieces Strator knife 2 Screen perforation 5mm Weight approx. 250 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common va ...
used
Cylinder head, complete for Wartsila L32 / V32 engine The cylinder head has only done a few running hours. Part no: 120080 Including valves / springs / rotocaps / rocker arm Standard size exhaust valve seats.
used
-Blower hammer mill with 45 kW -Rotor should be prepared
used
rotorwidth: 300mm rotorØ: 450mm feed hopper: 250mm x 280mm rotor knives: 9 bed knives: 2; ready for operation
new
New machine GSL 300/400 Rotor diameter 300mm Rotor width 400mm Drehzal 150 min. Drive 7.5 kW Rotor blade 33 pieces Strator knife 2 Screen perforation 6mm Weight approx. 550 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common ...
new
New machine GSL 300/600 Rotor diameter 300mm Rotor width 600mm Drehzal 150 min. Drive 11 kW Rotor blade 48 pieces Strator knife 2 Screen perforation 6mm Weight approx. 950 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common v ...
used
Drive: 55 KW / 1480 RPM / 500 V Speed rotor: 645
used
Stock U2261-1 Second hand Jehmlich (Germany) model Record D carbon steel beat mill (universal mill). Unit has cast iron body and carbon steel beater-discs. Mill has stator and rotor with diameter 570 mm. Rotor is driven via belts by el. motor 22 kW, 2930 rpm, 380 V, 50 hz. Includes product feeder driven by separate el. motor. Technical documentation is not included.
used
Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).
used
Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.
used
Used thickening centrifuge Performance speed: 1600 rpm Drum diameter: 1114 mm Weight: 18,500 kg Rotodiff: Viscotherm 112 S full hydraulic Second-hand machine Not ready for operation (major overhaul extra charge!)
new
Power rotor diameter: 25mm, Design generation : 3, RPM : 3600 max, Max. inlet.: 7 bar, Power: 0.3-1.1 Flow: 10-30.4 L/min, Max. Discharge pressure: 16 bar BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720
used
Used centrifuge semi mobile (with base) Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1123 mm Drum wall thickness: 23 mm Drum material: 1.7380 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 19.400 kg not ready for operation (major overhaul extra charge!)
used
Rotor Ø: 340 mm Working width: 410mm Motor power: 11-18.5 kW Rotor cutting strips: 5 Stator cutting strips: 2 Insertion opening: approx. 410 x 340 mm Capacity depending on plastic and screen size: approx. 130-400 kg/h Granulate conveyor: 1.1 kW Net weight: approx. 1640 kg Gross weight: approx. 1865 kg Box dimensions: approx. 2.2 x 1.7 x 1.6 m Feed belts with silencer Centre distance: 3700 mm Belt width: 400mm Net weight: approx. 296 kg Gross weight: approx. 430 kg Box dimensions: approx. 0.8 x 0.8 x 4.4 m - Overhaul in 2022 - Real bevel cut - Integrated sound insulation - Conveniently designed grinding room - Safe material acceptance - Optimum granulate quality - Built-in granulate conveyor system - Easy maintenance and cleaning - Tested occupational safety Ø of rotor: 340 mm Useful width: 410mm Motor output: 11-18,5 kW Rotor blades: 5 Stator blades: ...
new
215 MW Toshiba Inlet Steam Turbine & Generator (Unused and well maintained) New in 2008, this Power Plant has never been used and is available for immediate inspection and delivery. Never having been used, the Plant has no wear whatsoever. The Steam Turbine: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar Minimum load: • No extractions, Only bleeds, Steam flow: 45 kg/s Maximum load: Steam flow: 270 kg/s The turbine is a Single Flow Extraction Condensing type. Steam initially enters the steam inlet flange near the end of the high pressure section and flows through the turbine stages toward the generator end of the unit. After passing through the turbine stages, the steam is exhausted to condenser. The exhaust hood is keyed to the foundation plates at a point near its center ...
used
Used centrifuge (with base) Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1123 mm Drum wall thickness: 23 mm Drum material: 1.7380 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 14.000 kg not ready for operation (major overhaul extra charge!)
used
General Manufactured by TBMA Europe BV Type Har 200 #00271200 Key Features Material Steel Engine Nord 230/380V 055 kw Inlet diameter 200 mm Specified properties – rotary lock Material Steel Rotary lock Yes Rotor with scrapers Yes Rotor diameter 250 mm Rotor width 260 mm Number of faces 8 Compartment dimensions 100 mm x 260 mm Inlet diameter 200 mm Surface dimensions Inlet flange dimensions Ø 340 stc295 8xØ24 mm Exhaust Ø200 Exhaust flange dimensions Ø340 stc 295 8x Ø24 mm Installation height 370 mm Excluding Gaskets With Motor Yes Rotor speed 13rpm External Bearings Yes With socket gasket Yes Information Total height 370 mm Weight 160 Kg Floor area 650 mm x 650 mm Additional Specification
used
QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...
used
Brand: CFT Model: TE Series Manufacture year: 2002 Production capacity: 15 tn per hour The series has been designed to improve the already superior performance of its predecessors, the MANZINI TE. 15 and TE.30. While preserving the important characteristics of its truncated cone-shaped screen, this new design permits a rapid changeover (without removing the paddles) because the narrow end of the conical screen is at the front of the unit, beneath the cover. The series of turboextractors has a peculiar characteristic: product emulsion due to air trapped within the product. In fact, the infeed of product is located on a completely closed cover and the centrifugal action of the paddles against the conical wall produces an impingement effect in the direction of product flow that helps pomace conveyance towards the expulsion channel. Turboextractors are specifically designed for e ...
used
Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...
used
Used centrifuge Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1120 mm Drum wall thickness: 23 mm Drum material: 1.7382 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 22,000 kg not ready for operation (major overhaul extra charge!)
used
TECHNICAL SPECIFICATIONS Manufacturer: KRUPP / KLEEMANN REINER Designation: Impact crushing plant and screening unit Design: semimobile, screw construction Year of construction: 1996 Complete treatment plant consisting of: Item 01) FEED BUNKER Bunker capacity: approx. 6 cbm Bunker insertion width (side): 4,270 mm Bunker insertion height: 6,800 mm Hopper elevation: 500 mm Item 02) BUNKER VENT Type: FUF 1200-250x3500 Usable width: 1,200 mm Length: 3,500 mm Installation inclination: horizontal Drive power: 2 x 3.5 kW Item 03) CIRCULAR VIBRATING SIEVE Type: Turbo 1.4 x 1.8 - 2D Screen version: Two-decker Screen width: 1,400 mm Screen length: 1,900 mm Total length: 2,200 mm Drive power: 11 kW Item 04) HAND-HELD STATION - Between feed hopper and impact crusher - Conveyor belt with access on both sides - Enclosed and protected from the weather Item 05) ...
used
Valonkone Debarking Machine VK450 Year of construction: 1987 ( current photos coming soon - only sample photo ! ) Debarking diameter (mm) 80 - 480 Min. trunk length (m) 2,2 Weight (kg) 13.500 Motor: Rotor (kW) 55 Engine: Feed unit (kW) 3x11 Refurbished / workshop tested Valonkone debarking machine: The renovation process essentially includes: - Mending the sheets, replacing recesses - Check rotor bearings, check knife axes and partially repair them. - Order bearings and wear parts (cardan shafts). - Repairing tables and attaching new plates to the edge strips, in some cases new conveyor chains. - New straps - Check and repair geared motors. - New control cabinet - Partial sandblasting or rust removal and re-priming The VK450 debarker was the first of the "new generation" of VK debarkers, followed by the VK600 and VK800 models. It quickly became the most sought- ...
used
Used centrifuge Speed power: 3700 RPM Maximum operating speed: 3700 RPM Drum diameter: 350 mm Drum wall thickness: 10 mm Drum material: 1.4541 Max capacity: 75 dm³ Max. Density: 1.5 kg / dm³ Maximum operating temperature: 40°C Weight: 1.700 kg Overhauled, with Rotodiff
used
20pc. Borschert Breake in very good condition usable for Win-up or Let-off by AuMA / Rotocure, Calender, for shaft 60 x 60mm
used
Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...
used
Wind-u for AUMA / Rotocure, Calender,.. transportable, plug and play E+L centering
used
Sala cyclone pump DN 150 mm Drive 30 kW Pump and rotor in good condition
used
Qty 1 x HF/Pomini VIC95X (IM110VIC), Hydraulic hopper (IM90-E type), Refurbished complete chamber and hopper installed new in August 2016, Machine number: 487, year of rebuilding 2014, CE marked, Chamber volume approx: 104Litre, Useful volume at 0.75FF: 78Litre, Batch weight at SG 1.15: 90kg, Hydraulic dust seals (PYH Type), Hydraulic drop door with linear actuator and toggle latch, Rotor geometry adjusted by 2 x 2.2kw, 1420rpm motors, Unidrive gearbox, Ratio 20.6:1, With Ansaldo 352KW, 1030/1230rpm, 875Amp, 440V water cooled DC variable speed motor. Siemens S7 PLC control system (cpu 315-2DP, step 7). Complete and in very good working condition. All manuals and documentation available. Used spare chamber parts available/included:- Qty 1 set (2pc) used rotors Qty 2 sets (4pc) used drilled sides Qty 2pc used door tops Qty 1pc used weight The mixer has now been r ...
used
Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.
used
Stock# UG6236 Little used vertical gap mill by Bauermeister (Germany) type GM 80.1 EX. Machine is driven by el motor 75 kW, 3000 rpm. Working output depends on product and can reach up to 800 kg/h. Maximal feed size up to 1.5 mm. Reported maximal output finess up to 200 microns. Mill has adjustable gap in range from 1 up to 5 mm and is equipped with ASIMA rotor working with speed up to 123 m/s. Milling elements designed in hardened steel. Mill has ATEX Ex II 1/2D T 100 C certificate. Shipping dimensions: L 2140 mm x W 1270 mm x H 1470 mm x W 1900 kg.
used
Features and advantages of the classifier mill ACM: • Grinding and classifying in one machine. • Excellent selectivity, steep particle size distribution. • Infinitely adjustable fineness. • Flow-optimized, conical classifier wheel guarantees product without oversize grain and low wear compared to cylindrical classifier wheels. • Cool and gentle grinding due to high air flow. This makes the ACM ideal for processing temperature-sensitive products. • Deflection area in the grinding chamber lid: classifier gap flushing not required. • Low noise emission. • Very good running characteristics due to the belt-driven grinding disc. Bzc3pyxj32 • Easy to maintain: motors and bearings easily accessible. • The lid lifting device allows quick access to the grinding and viewing zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Option ...
used
Hermle Centrifuge Z 206 A Small Centrifuge - Service description: Clear user interface - Microprocessor control with LCD display - Lid locking and locking - Pre-selection of the rotor type - Active imbalance detection and shutdown (rotor-specific) - Easy rotor change - Wide range of rotors and accessories - Built according to international safety guidelines, e.g. IEC 61010 - Optimal airflow keeps samples cool - 4x fixed angle rotor 221.39 for 60 mL tubes • Max. speed: 6000 min-1 • max. RZB: 4427 xg • max. volume: 6 x 50 ml • Speed range: 200 - 6000 min-1 in 50 min-1 steps / 10 rzb steps • Running time: 59 min 50 s / 10 s steps 99 h 59 min / 1 min steps • Dimensions (WxHxD): 28 x 26 x 37 cm • Weight: 12 kg Condition: used, top condition More centrifuges - new and used - can be found in our shop! International shipping costs on request!
used
Equipment / Additional information: JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001
used
TECHNICAL SPECIFICATIONS (impact crusher) Manafacture: SBM Designation: Impact crusher Version: Semi-mobile Type: RHS 12/12/4 Year of construction: 1998 Drive cable: 160 kW Drive type: V-belt Throughput: 130 t/h Inlet opening (width/depth): 1,264 / 1,047 mm Maximum feed size: 800 mm Number of blow bars: 4 pcs. Rotor diameter: 1,280 mm Rotor speed: 33.3 m/s Weight impact crusher: approx. 15,500 kg SPECIFIC COMMENT - Selective crushing of soft to medium-hard natural stone, reinforced concrete and rubble - Without grinding track - Can also be used as a secondary crusher OVERALL SYSTEM CONSISTING OF: - SBM impact crusher RHS 12/12/4 - Feed hopper with vibrating chute - Bar sieve for pre-screening - Outlet channel - Discharge conveyor - Overbelt magnet - Stockpile conveyor - SIMENS Simatic OP7 controller -Structural steelwork - Generator set - Optionally a ...
used
Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel
used
No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de
used
BRAIBANTI production line for pasta "Long cut" Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according ...
used
4 axis vertical machining center for input shafts machining 2 pallets STAMA MC 325S 2 pallet with rotopallet Peiseler X=500 Y=300 Z=350 mm Rapids X,Y,Z = 40/40/45m 36 tools ISO 40 36-9000 rpm Table 950 x 800 mm CNC SIEMENS 840 N.2 double 4th axis Coolant through spindle Lavorazione input shafts (ex TRW) INTERESTING PRICE (package of 2 machines)
used
Granulator - Wittmann CM5 (3 pcs.) Location: Lodz, Poland Year of construction: 2011 Slow-moving granulator with gearbox Power: 1.1 kW 2 stator knives, 2 x pushers, rotor with the cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the grinding thickness by means of the hole adjustment between milling and stator knife Granule mill is used for grinding very hard details, waste - just like the crusher Hole for material case is prepared for connecting with suction conveyor All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request
used
Granulator - Wanner D25.38 s Location: Lodz, Poland Year of construction: 2011 Low-speed granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator knives, 18 rotor knives, the sieve - interchangeable Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is often changed All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request
new
Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
used
ZERMA GSE 700 plastic granulator machine manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rotor with knives arranged in a ‘V’ shape. The rotor is driven by a slide-rail-mounted electric motor with tension-screw adjustable V-belts. The ZERMA GSE 700 plastic granulator machine can even cope with larger pieces of plastic, such as lumps and film rolls, thanks to the use of a deflecting wedge and block knives to prevent the rotor from blocking. All of the machine’s components are mounted on a base frame, fitted with mounting pads to dampen noise and vibration.
used
Cutting mill Make retsch Type SM 2000 Power 695 rpm at 50 HZ 1500 Watts Rated Power Screen size 4x4 mm 6-disc rotor with 18 interchangeable inserts made of carbide can be used universally 5 litres collection container Cascade funnels Width 550 x height 1415 x depth 600 mm Weight 119 kg
used
4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)
used
Diebel RMH 18/45 pelletizing system for cables, plastic Manafacture: Diebels Type: RMH 18/45 Year of construction: 2011 Drive: 7.5 kW Filling opening: 460 x 225 mm Rotor diameter: 180 mm Sieve hole: 4 mm Replacement screens: 2 pieces, 2 / 3 mm Throughput (plastic): 60-80 kg/h Weight: 320 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW
new
Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20
new
Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm
used
Shredding plant / chipper / shredder for shredding wood waste - Waste wood waste - Pallets - Packaging material and waste of many kinds Make: VECOPLAN - MASCHINENBAU Type: VAZ 300/180 Silent and slow-running. Propulsion:132. Kw. Rotor width:1800.mm. Rotor diameter:420.mm.(solid steel.) Rotor speed:80-120 rpm Capacity: 1500-2000.kg/h.je by material and task. Tools-knives ( cutting crowns 80x80 mm ) Sieve: 30.mm. round hole reinforced design Hydraulic strainer and rear flap with lowerable counter knife Conveyor belt cut-out 1000.mm. Insertion: approx. 1800 x 3000.mm. Weight: approx. 18.500.Kg. Included: control cabinet system + hydraulic system + operating instructions + electrical circuit diagrams. Dealer price 34.500.00€ net ex location. The machine is in good general condition