roto used for sale

1 x Farrel Banbury internal Mixer, Model 00C.  Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

1 x Francis Shaw model K1 Intermix MK4, Installed new in 1991, fully maintained and checked over by HF in 2005. Net chamber volume: 5.5litres, pneumatic hopper, hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor and controls. Castell Key interlock system Complete and in excellent condition. Chamber and rotors are like new! O/a dimensions: 3m x 1.2m. Can be seen working. All manuals/documentation available.

Vecoplan injection moulding machine Type: VAZ 160/200 SLF Control: PLC Control built year: 2004 Dimensions and weights Dimensions LxBxH m: 3.5 x 3.75 x 2.34 Machine Weight kg: 19,000 Other Inlet length: 1600 mm inlet width: 2000 mm rotor diameter: 640 mm Double number cutting crowns 48 pieces (80 x 80 mm) rotor speed: 148 UpM screen diameter: 120 mm drive power: 250 kW operating voltage: 400 V frequency: 50 Hz throughput: When face, Precrushed and FE-free material for replacement fuel preparation > 12 t/h at heavy goods with a density of 120 kg/m ³ > 5 t/h at lightweight with a density of 80 kg/m ³ with product grain size < 150 mm more than 98% < 30 mm less than 5%.

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Heavy duty refurbished grinder. Very robust construction. Rotor with staggered blades. Rotor diameter 400mm rotor length 700mm. Powered by 22kW electric motor. Complete with electrical panel with Siemens touch screen panel including inverter for the control of the grinder. This electric panel can also control a loading belt, exhaust fan, etc. The control was built in 2010 for internal tests and used for less than 100 hours. As an alternative, we can also fit a new e.motor 37kW on this grinder and manufacture a new control panel for the increased power at an additional cost. This special rotor with staggered blades is also particularly suitable for heavy applications and for grinding fibrous materials and textiles

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

Slow runner with sliding floor 800 mm wide rotor 22 kw engine

Dosing pump, diaphragm dosing pump unused Seko 3 head diaphragm dosing pump Stainless steel pump housing Built: 2016 Engine 7.5 kW 380/660 V Pumps Temperature range: -20/30 °C Type 1T10N12FB Capacity: max 11.4 l/h Pressure max 60 barg Speed. max 117 SPM Type: 1T30N12FB Capacity: max 108 l/h Pressure max 60 barg Speed. max 117 SPM Type 1T50N32FB Capacity: max 598 l/h Pressure max 60 barg Speed. max 117 SPM Actuators: Seko SRE.40AA2000 Rotork R-250 with pulsation damper and accessories as shown in photos Shipping dimensions: approx. 1800 x 1800 x 1800 mm Sale also possible in parts! The pump comes from a research facility and has never been used. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

High-efficiency dynamic classifier (separator) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel equipped with 64 blades, outer ring equipped with 36 manually adjustable counter-blades, incl. drive. In very good condition.

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal

Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055

TECHNICAL INFORMATION Manufacturer: BHS Sonthofen Name: Impact crusher Type: VPM 1100x700x3 BM Drive line: 90 kW Drive type: V-belt Throughput: approx. 80 t/h (depending on the feed material) Inlet opening (width/depth): 700 x 500 mm Built: 1991 Execution: Heavy Number of impact bars: 3 pcs. Rotor diameter: 1,100 mm Weight: approx. 7,100 kg (without drive and base frame) Rotor speed: approx. 700 rpm SPECIFIC COMMENT - Incl. 3 new impact bars - Incl. new interior lining - Incl. steel support for the crusher construction If there is any interest, we are happy to send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

System: eccentric screw pump Manufacturer: REWA Type: R20-2 Year: 2014 Flow rate: 0.8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 1.5 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber Condition: The pump has no hours of operation and is as good as new

Producer: Alpina Description: -Hopper capacity: 60l -Paddle rotor (teflon paddles) -Twister -Efficiency approx 300kg/h

REWA R35-2 Product no.: RE-HU-2015-0901-PEC2 System: eccentric screw pump Manufacturer: REWA Type: R35-2 Year: 2014 Flow rate: 8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 4 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Intermix - mixer GK320-E YOM: 1992, overhauled in 2004 Volume: 320kg / 208l Rotors: Intermix, PS3 + Hopper: hydraulic only mixing chamber, base plate and hydraulic Hoppfer available!

WAUKESHA UNIVERSAL II (U2) model: 030-UII , capacity 8.2 m3/h output pressure 17.2 bar Waukesha Cherry-Burrell Universal 2 Series hygienic pumps with rotating pistons are characterized by reliability, gentle unpulsive pumping of products with a wide range of viscosities. The special rotor profile and fixed cross-section of the working chamber ensure no pulsation, no turbulence and gentle pressing of the product without destroying the structure or desired solids. Unlike cam pumps, the Waukesha pump with rotating pistons has only rotor tolerances to the stationary body and pump cover. They used a special non-rubbing material of rotors, thanks to which it was possible to significantly reduce internal tolerances. In addition, the seal line is extended compared to ordinary pumps. As a result, reverse leakage is minimized even with low viscosity fluids and the pump runs smoothly  ...

Cerutti coating machine for Paper, films and Aluminium Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporation (water). This process is repeated in lin ...

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Slow runner with sliding floor Rotor width 800 mm 18.5 kw motor

Used hammer mill (impact crusher), model 97.58. Overall dimensions: Length 2960 mm Width 2090 mm Height 2065 mm Rotor diameter 0.8m Rotor width 0.6 m Number of hammers 4pcs Max feed grain size To 0.15 m of sedimentary rocks For igneous rocks of 0.20 m Weight Crusher 5.9 T Crusher Capacity 40-70 T / h Main drive 45 kW. Included support frame and spare hammers set. Max rock crushing size 0,15 m sedimenting rocks 0,20 m magma rocks

TECHNICAL SPECIFICATIONS Manufacturer: BÖHRINGER (Germany) Name: Impact crusher Type: PB 1300 x 1200 Year of construction: 1978 Weight: approx. 26,000 kg Drive line: 200 kW Drive type: V-belt Throughput: 200 - 300 t/h Inlet opening (width / height): 1,330 mm / 1,500 mm Maximum task size: approx. 1,000 mm Number of impact strips: 3 pcs. Rotor diameter: 1,200 mm Rotor width: 1,300 mm TECHNICAL SPECIFICATION Manufacturer: BÖHRINGER (Germany) Description: Impact crusher Type: PB 1300 x 1200 Year of construction: 1978 Weight: approx. 26,000 kg Drive power: 200 kW Type of drive: V-Belt Throughput: 200 - 300 t/h Feeding opening (width / height): 1,330 mm / 1,500 mm Feeding size: approx. 1,000 mm Number of rotor ledges: 3 Pcs. Rotor diameter: 1,200 mm Rotor width: 1,300 mm

1 x Buzuluk 240 litre Internal mixer Model: 14630, year: Dec 2008 (body and hopper), Batch size: 200 kgs, Drilled sides, Self sealing type dust seals, Oil injection, Hydraulic drop door with linear actuator and toggle latch, Stellite faced drop door, Two wing tangential rotors. 20in pneumatic hopper. 3 zone TCU Full unidrive gearbox (Make Skoda), with 630kW, 6000V, 739rpm, 73.5A slip ring motor and Oil filled starter. In very good condition.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task ...

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

VESPA 30/60/18.5 VGA Cutting mill for plastics 18.5 KW, 200-300 kg/h. Insertion opening mm: 620×400 Rotor diameter mm: 300 Throughput kg/h: 200-300 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Engine KW: 18,5 Dimensions mm: 1210×1000×1925 Weight kg: 1500 options: Material conveying blower 4.0 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with pre ...

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

VESPA 45/80/37 kWt VGA Cutting mill for plastics 37 KW, 400-700 kg. Model VESPA 45/80/37 kWt VGA Throughput Kg/h: 400-700 Rotor diameter мм: 450 Rotor knife quantity/dimensions piece x mm: 6×400 Stator Knife Quantity/Dimensions Piece x mm: 4×400 Engine kW: 37 Weight Kg: 2300 VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with precision machining and surface finish – Good accessibility for cleaning and maintenance – Electrical equipment with SCHNEIDER ELEC ...

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Cutting mill VESPA 18/32/5.5 kW VGA for plastics, cable 5.5 KW, 60-80 kg/h. Model: VESPA18/32/5.5 kW VGA Throughput Kg/h: 60-80 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×160 Stator Knife Quantity/Dimensions Piece x mm: 4×160 Motor kW: 5.5 Weight Kg: 400 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 860 B-620 C-1480 D 1250 E 325 F 220

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. 40/80/30 VGA granulator for plastics 30 KW, 350-600 kg/h. Model: VESPA 40/80/30 kWt VGA Throughput Kg/h: 350-600 Rotor diameter мм: 400 Rotor knife quantity/dimensions piece x mm: 6×400 Stator knife quantity/dimensions piece x mm: 4×400 Motor kW: 30 Weight Kg: 1960 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 1520 B-1430 C-2420 D 1910 E 820 F 500

VESPA 40/60/30 VGA Granulator for plastics 30 KW, 300-500 kg/h. Insertion opening mm: 620×500 Rotor diameter mm: 400 Throughput kg/h: 300-500 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Motor KW: 30,0 Dimensions mm: 1540x1190x2280 Weight kg: 1760 options: Material conveying blower 4.0 | 5.5 | 7.5 | 11 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

VESPA 35/50/15 VGA Cutting mill for plastics 15 KW, 150-250 kg/h. Insertion opening mm: 520×380 Rotor diameter mm: 350 Throughput kg/h: 150-250 Rotor blade quantity/mm: 6 x 250 Stator knife quantity/mm: 4 x 250 Motor KW: 15,0 Dimensions mm: 1180x880x1970 Weight kg: 1150 options: With material conveying blower 4.0 kW and big bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self ...