roto used for sale

Machine vice, rotatable and tiltable WMW, ROTO RECORD SN 100 jaw width: 100 mm jaw height: 32 mm wingspan: 80 mm on table with graduation 2 planes 360° rotatable 90° tiltable used, tested ! Dimensions: 300 x 115 x 165 mm

Clamping drive WMW, ROTO RECORD ESpU 12 R Engine: KMR 71 K 4 E 0,0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: 14 x 14 mm, square profile Flange diameter: Ø 142 mm bolt circle diameter: Ø 142 mm, 4x threaded hole M6 x 1.0 used, tested ! Dimensions: 255 x 195 x 142 mm

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel appx dimensions: L 3.470 mm.x W 1.500 mm. bent steel structure, electric motor DIAGONAL AUGER, 1,5 Hp drive diam +/-150 mm. – width +/- 1000 mm. – length +/- 1500 mm. – bolted upper cover, de-pre ...

Milling head, with clamping drive and coupling device WMW, HECKERT FSS400 Tool holder: SK50 360 ° rotatable inner flange diameter: Ø 250 mm outer flange diameter ( inside / outside ): Ø 429 / 585 mm ring groove diameter ( inside / outside ): Ø 480 / 502 mm Groove width: 22 / 36 mm Hookers: 42 mm Clamping drive: ROTO RECORD EDU I80 HDR coupling: EK IH used, tested ! Dimensions: 1000 x 590 x 450 mm

Base plate for lathe chuck ROTO RECORD DHK 315 bottle ( lathe chuck side ): Ø 265 mm bolt circle ( lathe chuck side ): Ø 290 mm, 3x bore: Ø 13.5 mm central bore: Ø 50 mm countersunk holes (machine side): Ø 19 mm, depth: 21 mm mounting holes: Ø 18 x 40 mm ( U-shape ), hole spacing: 330 mm used, tested ! Dimensions: 400 x 320 x 40 mm

Turntable, rotatable base plate for machine vices WMW, ROTO RECORD D 125 outer ring: Ø 115 / 166 mm inner ring: Ø 90 mm bolt holder: Ø 25 mm groove width: 12,5 / 21 mm groove depth: 20 mm groove (bottom): Width. 20 mm, depth: 6 mm with graduation 4x slotted hole: Ø 17 x 47 mm 2x U - hole: Ø 16 x 27 mm New ! Dimensions: 233 x 170 x 28 mm

Compressor Oil (OEM), Compressor Lubricant ATLAS COPCO 2901-0245-01 Roto-Inject Fluid Capacity: 5 l for screw compressors ( GA, GX ) New ! Dimensions ( packaging ): 230 x 130 x 305 mm

Compressor Oil (OEM), Compressor Lubricant ATLAS COPCO 2901-0522-00 Roto-Inject Fluid Capacity: 20 l for screw compressors ( GA, GX ) New ! Dimensions ( packaging ): 300 x 260 x 385 mm

Planscheibe ROTO RECORD PL 315x6 TGL 30-22313 Outer Ø: 315 mm bolt circle Ø : 133.5 mm bore Ø: 100 mm n max: 710 rpm New ! preserved ! Dimensions: 315 x 315 x 125 mm

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

3-jaw chuck, three-jaw chuck ROTO RECORD EF 250 Outer Ø: 250 mm bolt circle Ø : 225 mm bore: 80 mm height with jaws: 140 mm Clamping process via rotatable base plate ! with interchangeable jaws ! used, tested ! Dimensions: 250 x 250 x 140 mm

4-jaw chuck, four-jaw chuck, lathe chuck WMW, ROTO RECORD DH 375 x 4-III TGL30-2332 n: max. 1100 rpm < br /> Outer Ø: 375 mm Centering Ø: 320 mm bolt circle Ø (chuck) : 345 mm bore Ø: 140 mm height with jaws: 137 mm with lathe chuck used, tested ! Dimensions ( lathe chuck ): 375 x 375 x 137 mm

CO2 laser cutting machine (AMADA type FO-3015 MII NT CI) - 4000 Watt resonator w standard equipment according to the offer: travel range 3070 x 1550 x 200mm maximum thickness of cut material: Normal steel - 20mm Alloy steel - 12mm Aluminum - 10mm displacement speeds of 113m / min specially cast machine bed pallet changing system telescopic cabin - protection against radiation laser head with capacitive sensor programmable Z axis diode laser for positioning laser power control (DR) Intelligent Cut Control - (ICC) auto focus recognition of the position of the sheet Active Cut - rays telescope Clean Cut Alu Cut Power Piercing oil spray device 5 and 7.5 lenses with replaceable cartridge WACS system suction system cooling system ROTO- CI - Profile cutting unit - installed in the FO-3015 lase ...

MORI SEIKI SH-503 4-axis horizontal machining center manufactured in 10/2000 in Japan by Mori Seiki CO. LTD. The CNC milling machine is equipped with the Mori Seiki MSC-501 numerical control. -Cone BT40 chain 120 tools -HP spindle center coolant pump -Roto pallet 2 pallets -2 4-sided cubes - CNC control : MORI SEIKI MSC-501 - machine weight: 10100 kg -In working order -Price excl. dismantling, loading and transport

Farrel Bridge model 3D Banbury internal mixer, Machine no. 85R6001, May 1985, Chamber capacity: approx 65 litre net. 2 wing rotors, Roller bearings, FYA Seals, Drop door discharge with power pack, Pneumatic hopper, Standard Bullwheel/pinion drive, With Brush 200HP slip ring Motor, 981rpm, 3ph, 50Hz. Complete with oil immersed starter etc. Previously used on PVC

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

We can provide them with suitable Glass Bestcut for Busser MKH Finecut and for Stephan Micro-cut machines Supplying suitable sheath heads and cutting rings Furthermore, it is also Karl Schnell Finest Shredder Type FD 175 and FD 225 with 3 step cutting system in these the last stage as rotor / stator system is installed. Just like repair / refurbishment / and sharpening as well as regrinding of the cutting heads

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Vecoplan Type: VAZ 300/250 UNF, Shredder Built: 1996 Dimensions and weights Machine weight Kg: 24000 Other Drive power 200 KW Rotor diameter 620mm Rotor width 2491 mm Speed 150 1/min Throughput line about 4000kg/h

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

Vecoplan S Type: VAZ 300/250 UNF, Shredder Built: 1996 Dimensions and weights Machine weight Kg: 24000 Other Drive power 200 KW Rotor diameter 620mm Rotor width 2491 mm Speed 150 1/min Throughput line about 4000kg/h

MFL-VORTEX, opening: approx. 1,030 x 720 mm, rotor diameter x rotor width: 1,000 x 1,000 mm, feed size: approx. up to 400 mm , capacity: - 110 cbm/h, weight: approx. 13 t.

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Ermafa Type: RA 1200-350 , Agglomerator Control: Siemens S6 Built: 1995 Dimensions and weights Dimensions LxWxH m: 1.5 x 1.5 x 3.36 Machine Weight Kg: 4250 Other Motor-Three-phase cage rotor motor Performance-355 KW Speed-1488 rpm Voltage-380/660 V;50 Hz Degree of protection-IP 55 Type-IM V3 Mode-S 6 Mixed fraction from shredding 700-1100 kg

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

OPERATING POSITION... HORIZONTAL PUMP SET SIZE . 90.1 CONSERVATION SILICONE OIL ROTOR . . . . . . . . . . . . . 1.2436 U80 STATOR . . . . . . . . . . . . . NBR-LM 778/60-ST MOUNT RINGS... 1.4571 TENSION ROD MATERIAL... 1.4301 JOINT MATERIAL... . V4A JOINT DESIGN... . CARDAN (PW) ABGEDIC. CUFF... NBR TISSUE JOINT OIL... White oil EXTRA SHAFT SEAL... SPECIAL VERSION SUCTION CASING... V4A SUCTION... DN100/PN16-V2A SUCTION LOCATION TOP GASKET... NBR OUTLET... . DN100/PN16-V2A DRIVE flange [mm]... 250 Drive shaft [mm] 40 SHAFT MATERIAL... V2A LINEUP SPECIAL VERSION PUMP PROTECTION... WITHOUT ROTATION LINKS PUMP IDENTIFICATION... CHEEKS NAMEPLATE... STANDARD SURFACE PROTECTION... STANDARD C1 FARBE . . . . . . . . . . . . . RAL 9006 WEIßALU DRIVE... STIRNRADGETR.MOTOR DRIVE GEARBOX TYPE SEW RF77 ENGINE TYPE... DRE100LC4 PERFORMANCE... 3.0 KW SPEED at 50 Hz [ ...

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Material: stainless steel Weight: 350 kg Length x Width x Height: 1500 mm x 1200 mm x 1250 mm max.rotor speed : 5000 Upm, max. z-factor : 2180. Drum diameter : 150 mm, max. charge : 77 dm³. Drive : 5,5 kW u. 0,75 kW. Very good condition. Are you looking for something else? Write us below!

Vecoplan injection moulding machine Type: VAZ 200 / 200 SLF control:-year of production: 2003 Dimensions and weights Machine weight kg: 18,000 Other Drive power 132 KW rotor diameter 640mm rotor width 2000 mm speed 120-340 1 / min throughput line about 3000kg / h

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

FOR SALE... NOHAB DIESEL F30 NEW & GENIUE SPARE PARTS AT TURKEY. HAVE A GOOD DAY SIR; WE VE NEW UNUSED SPARE PARTS OF NOHAB DIESEL F30 ENGINE AT OUR STOCK WE'VE MORE THAN 198 NEW ITEMS. PLS FIND SOME SELECTED ITEMS AS BELOW WE VE ALSO RECON SPARE PARTS. RECON PISTON 4 GROOVES (4 PCS piston SCHMIDT & 1 PCS MAHLE) 5 PCS RECON CYLINDER LINERS (WITH CLASS STAMPED) 5 PCS RECON CYLINDER HEADS FULL (WITH VALVES & SPRINGS) LLYODS STAMPED 2 PCS RECON FUEL INJECTION PUMPS BOSCH 12 PCS RECON OIL PUMP 1 PCS OVERHAULED COMPLATE FUEL INJECTORS 10 PCS RECON FUEL FEED PUMP 1 PCS . IF YOU HAVE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. PLS FIND SOME NEW SPATE PARTS ITEMS LIST PISTON 4 GROOVES PISTON SCHMIDT 9198100965 1 LINER DNV TESTED ...

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

Circular tester for crankshafts, camshafts, rotor shafts, etc. Reworked. Tip width 440 mm Peak height 200 mm Bed re-ground. Device repainted Dimensions: LxWxH 1000x600x1100 mm Weight approx. 300 Kg Colour: Light grey

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Technische Daten: - Trichteröffnung 510 x 810 mm - Trichterform gerade - Trichtervolumen 0,4 m3 - Leistung je nach Material und Siebgröße - Motor 15,0 KW - Spannung 400 V / 50 Hz - Rotordurchmesser 260 mm - Rotorlänge 510 mm - Schneidsystem 12 Karo-Konkav Messer 30x30 mm - Rotordrehzahl 70 - 90 Upm - SPS Steuerung - Schaltschrank (komplett verkabelt) inkl. 5 m Kabel - Sieblochung 8 - 40 mm nach Wahl (Standard 15/20 mm) - Absaugstutzen Durchmesser 160 mm - Schieber mit Andruckbalken - schwingungsdämpfende Maschinenfüße - Automatischer Sterndreieck-Anlauf - Automatik Aus bei Leerlauf - Taktsteuerung zur Vermeidung unnötiger Leerlaufzeiten - leistungssteigernde Schrittwerksteuerung für Hydraulikschieber - CE-Konform - Abmessungen LxBxH 1750 x 1100 x 1640 mm - Gewicht 1000 kg

Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg

Holweg RS 21 Bag making machine, for Flat- and satchel bags, with in-line printer and window unit. Holweg Rotosimplex 21, Year of production : 1981 with 4 colors inline printer W&H QMS 992, 4 anilox, 4 rubber cylinders. Bag width 70 – 380 mm Gusset depth 12 – 80 mm Bag length 145 – 660 mm Cut length from 160 to 680 mm Max paper width 900 mm, Max print width 860 mm Bottom from 13,3 to 18,3 mm ( on this machine also possible for bigger bottom fold ) Max. speed 800 bags/min. Paper 30 – 125 g/m2 Foil window unwinder. Printing format cylinders 41 pcs. (270-1, 290-4, 300-1, 320-3, 350-3, 360-2, 370-1, 400-4, 420-4, 440-3, 470-4, 520-1, 600-4, 640-4, 680-2) Forming plates 28 pcs. (80,85,90,100,105,110,115,120,130,140,150,155,160,170,175,180,185,190, 200,210,220,225,230,240,250,270,300,320) Equipment for 5 sizes of wicket bags: (cut lengths 400,350,450,470, 520)  ...

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

1 x Farrel Banbury internal Mixer, Model 00C.  Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...