roto used for sale

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

VACUUM PUMP 7,5kW 510m3 Becker SV 500/1 + Cartridge filter + non-return valve SIDE CHANNEL COMPRESSOR SV 500/1 SINGLE-STAGE VACUUM PUMP Side channel fan - ideal pump for MDF In addition, it is equipped with a non-return valve and an external filter with a cartridge. The SV 500/1 is a single-stage regenerative blower that offers high performance in a quiet, touchless environment. 100% oil-free and contact-free, these pumps are maintenance-free, highly efficient, and require only minimal maintenance. SIDE CHANNEL COMPRESSOR Side channel blowers generate vacuum or compressed air for a wide range of industries. In these blowers, the rotor rotates contactlessly, so they are maintenance-free and wear-free. Above the upper and lower parts of the impeller there are separate working channels, thanks to which it is possible to use a single-stage version of the device for high flow ...

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...

Bead mill Manufacturer: Fryma Type: MSZ-12 Factory no.: M12362 Pressure product space: 2.5 / 0.2 bar Pressure double jacket: 2.0 / 0.2 bar Power: 2.5 kW 380 V Machine in EEx protection Rotor speed controlled Feed pump speed-controlled with pressure & temperature gauge Grinding set as good as new Switchgear in EEx protection very good condition Weight: approx. 150 kg LWH: 700 x 600 x 750 mm

CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...

WEIMA shredder for carpentry-carpentry sawmill waste -old wood etc. Type:WL 4. Feeding opening: 600x1050.mm. ( Log Funer ) Rotor diameter:252.mm. Rotor width:600.mm. Drive power:18.5kW. Tools: ( Knife piece 28.) 40x40.mm. Koncav Vs9lrq Weight:1300.kg.

Exhibition machine Inlet width: 1,400 mm Inlet height: 550 mm Rotor diameter: 1,600 mm Chopping knife count: 4 pieces Counter-knife number: 1 pc. with cutting gap adjustment Feed unit: 2 x 5 rollers Drive: 250-500 kW Machine weight: approx. 30,000 kg

Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

CATALOG NO. 7145 TECHNICAL DATA - loading hopper inlet 800x600mm - outlet for chipped wood, diameter 125 mm - rotor working width 580mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 40x40mm - 20x15mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1820x1220x1650mm - weight 1232kg ADVANTAGES – German production – original DTR + CE documentation – V-type rotor – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 49900 PLN Net price: 11089 EUR depending on the price 4.50 EUR Net price: 13132 USD depending on the price of 3.80 USD (Prices may vary with higher flu ...

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

Cutting Machine Fruit & Vegetable Shredder Herb cutter herb cutting machine for e.B. red cabbage, white cabbage, blue cabbage, Used Manufacturer: Gevaar Cutting chamber approx.: 800 mm Rotor/cutting disc approx.: 700 mm Filling flap approx.: 900 x 800 H 300 mm Filling flap adjustable via Pfaff winch Outlet approx.: 800 mm Vector RF60-DV112M-4 Drive Motor 220/380 v, 15.2/8.7 A, 50 Hz Power 4 kW, 275 r/min Total approx.: 2000 x 1200 H 2300 mm Weight: 421 kg Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

CATALOG NO. 7105 TECHNICAL DATA - loading hopper inlet 800x1000mm - rotor working width 800mm - main engine 18.5kW - pump motor approximately 1.1kW - number of knives 19 pcs - knife dimensions 30x30mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 180 mm - dimensions length/width/height 2090x1360x1630mm - weight 1250kg ADVANTAGES – autoreverse – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 62900 PLN Net price: 13978 EUR depending on the price 4.50 EUR Net price: 16553 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Pla ...

TO WHOM IT MAY CONCERN ; WE VE BELOW LISTED USED PARTS OF DEUTZ TBD 645 L CYLINDER HEAD EXHAUST CAGE - VALVE SPRING AND ROTOTOR ( LEFT ) 12PCS EXHAUST CAGE - VALVE SPRING AND ROTOTOR ( RIGHT ) 12PCS INJECTOR HOLDER WITH NOOZLE COOLED TYPE 12PCS AIR STARTER 12PCS FULL ROCKER ARM ASSY 12 PCS PLS REFER ATTACHED PICTURES. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Inlet opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet 870x735mm - rotor working width 720mm - main engine 18.5kW - pump motor approximately 0.75kW - number of knives 17 pcs - knife dimensions 80x40mm - 20mm sieve - pressure drawer - electric autoreverse - outlet for chipped wood, diameter 250 mm - dimensions length/width/height 2000x1350x1370mm - weight 1586kg ADVANTAGES – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 38900 PLN Net price: 8644 EUR depending on the price 4.50 EUR Net price: 10237 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulder ...

Inlet opening: approx. 100 x 1000 mmm Rotor width: approx. 1000 mm Rotor diameter: 350 mm Stator knife: 2 Rotor blade: 3 Drive: 30 kW Feed opening: approx. 100 x 1000 mm Rotor width: 1000 mm Rotor diameter: 350 mm Stator knives: 2 Rotor knives: 3 Drive: 30 kW

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Nestro rotary valve separator valve, for the separation / differentiation of paper chips or paper edge sections Specifications: Manufacturer: Nestro Lufttechnik GmbH Year of construction: approx. 2012 Motor: 4 kW Volume flow max. 28000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm. Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (LxWxH) Weight: approx. 3000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Used Herb/Spice/Tea Leaf Sifting Sorting Separator with conveyor manufactured by Scorpion Poland. Year of manufacturing 2019. HERB / SPICE / TEA LEAF SIFTING SORTING SEPARATOR TECHNICAL DATA • efficiency (depending on the type of raw material) 2-4m³/h • drum rotation speed 40-60 rpm • rotation speed of the feeder 30 rpm • number of electric motors 2 • main drum motor power 4.0 kW • power of the feeder engine: 0.75 kW • shaft gear C 51 2/3 S3 M3L • gear with NMRV 0.75 i50 shaft • number of fractions 3 • engine speed 1400 rpm • weight 1200 kg • made of carbon steel • overall dimensions length. x width x height 3432x1206x3143mm The machine was built to work in the food industry for mixing various types of tea mixtures or spices. All machine elements that come into contact with the product are made of AISI 316L stainless steel. TECHNICA ...

Inlet opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knife: 2 Rotor blade: 4 x 2 Drive: 30 kW Feed opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor knives: 4 x 2 Drive: 30 kW

Heidolph PD 5006 peristaltic pump, throughput 3,3 – 3,664 ml./min., accuracy +/- 5%, rotor speed variable 50 – 600 U/min.

Inlet opening: approx. 400 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 500 mm Stator knife: 3 Rotor blade: 5 x 2 Drive: 55 kW

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Rotor impact mill Type: RPMX 1116 Year of construction: 2016 Drive power: 200 kW Rotor diameter x height: 1,150 x 160 mm Grain spectrum: 0 - 15 mm Grinding gap adjustment: 4 - 6 mm Number of rackets: 8 pcs. Circumferential speed: max. 90 m/s Dimensions (LxWxH): 4,600 x 2,000 x 2,800 mm Total weight: approx. 10,000 kg SPECIFIC COMMENT - Factory refurbished 2023 - Rotor wear parts completely renewed - Both outlet shafts renewed - Safety equipment renewed - Ideal for the recovery of valuable materials from metal-containing fine fractions (stainless steel and cable strands) - Without control (but can be offered)

Granulator Load area: 140x140 mm Overall size: 950x500x1300 mm Power: 2,5 kW Weight: 200 kg Technical data: • Designed for beside the press operation (injection and blow moulding) • 3 knives open rotor • Reversible hopper • Slow rotor speed (250 RPM) • Lateral end discs which turn with the rotor • Standard screen in stainless steel • Quick opening and easy cleaning Processes: • Injection • Blow moulding • Extrusion Designed for: • Small wastes from purgings and castings • Tubes and profiles with small diameter • Trimmings

Prallbrecher Prallmühle Steinbrecher Einwellenshredder used Manufacturer: HAZEMAG / KLEEMANNs Type: WMS 800/1 Rotor diameter: approx. 800 mm without a fallback mechanism Filling shaft approx. 800 x 600 mm Ejection shaft approx. 1200 x 800 mm Dimensions without motor: approx. 2600 x 2300 x 2300 mm The drive succeeds via V-belts and can be individually adapted to the requirements.

Inlet: 1080 x 1000mm Rotor: 1000 x 1060mm Weight: about 11.5 t. Interior armour renewed

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power : 3

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...

HYUNDAI SPT V550D VERTICAL MACHINE CENTER :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens Tool attachment: iso 40 Spindle power: 18.5Kw Spindle Rpm: 10000 Number of tools: 24 X-Axis Stroke: 570mm Y-Axis Stroke: 410mm Z-Axis Stroke: 580mm Fast forward linear axes X Y Z: 36m/min Guides: roller Pallet change: yes Pallet size: 2x 650 x 410mm Rotopallet: yes :::D IMENSION AND WEIGHT::: Weight: 6000Kg

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulu ...

3 x Diverter ZWR-150-AS/AS-H0/R2-D-S Distribution or collection element in pneumatic conveyor systems for powdered and granular Products from a wide range of industrial sectors. Factory No. / Item no. /Drive end: 92576 / -- / R 92577 / -- / R 92578 / -- / R GENERAL DATA Product: Li2Co3; LiOH Powder Bulk density: 380.0 kg/m3 Bulk density: 900.0 kg/m3 Grain size distribution: 0.050 mm Grain size distribution: 0.400 mm Product temp. min.: 10.0 °C Product temp. max.: 35.0 °C Ambient temp. min.: 10.0 °C Ambient temp. max.: 35.0 °C Discharge pressure: 0.00 bar (g) Explosion protection: According to customer specifications, no explosion protection provided Design data Max. operating pressure: 6.00 bar (g) Compressed air supply: 4.50 bar MATERIALS / DESIGN Execution: Distribution Housing: Cast aluminium EN AC-42100 (A375.0) with replaceable stainless steel in ...

FUJI KING DEBARKERS CAPACITY 200t/h ( one double section 60 t/h) USED EQUIPMENT, DISASSEMBLED, WASHED, LOADED ON TRUCKS AND CONSOLIDATED IN CONTAINER. MODEL KD6/50DT (EACH DEBARKER) YEAR OF MANUFACTURE 1995 TECHNICAL SPECIFICATIONS OF EACH EQUIPMENT: • TWO (2) DOUBLE ROTOR SECTIONS EACH. • SECTION LENGTH OF 7.65 mt (25') • TOTAL LENGTH OF 15.3 mt (50´) • WIDTH OF THE INTERIOR COMPARTMENT OF PIECES OF 2.4 mt. • MAIN ROTORS DIAMETER 0.9 mt. (36”) x LENGTH 7 m (23’) • POWER SYSTEM: 2 ENGINES 575 V 60 Hz 100 HP CONNECTED TO THE REDUCER MOTOR AND DRIVING THROUGH CHAIN. • VARIABLE SPEED FROM 16 TO 50 RPM. • DISCHARGE DRIVEN BY VERTICAL CHAIN AND MOTOR 575 V 60Hz 3HP • NET WEIGHT: 42 TONS PER SECTION - 2 SECTIONS 84 tons TOTAL. EACH KIT DOES INCLUDES: ❖ WAIST BARK BELT CONVEYOR ❖ FEED ROLLERS ❖ SUBSTRUCTURE FOR SUPPORTING FOUNDATIONS, CONSI ...

Hobart Universal Dishwasher XXL Model: UXTL-11 Genius-X Fine Filter System Easy Clean Concept - Basket size: 1140 x 680 mm - Insertion height 850 mm - 3 programs with color display - Drain pump - Rotor X washing system - Dishwashing agent dosing - Clear-spuse agent dosing agent - DGUV V3 tested Dimensions: 1380 x 950 x 1980 mm, WxDxH Connection: 400V, 21 kW, 32A-CEE plug Used machine cleaned and tested More top bakery machines in stock!

Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: completel ...

Description Granulator Solid Rotor Knives 3 + 2 still Total Power 35 kW Feeding hopper 320 x 820 Rotor diameter 260 Rotor Length 600 OVERHAUL 2015

The CIMAT CMT 30 V2 balancing machine was manufactured in 2015 in Poland. Bvcilkrj7m Basic technical data: - software: ROTOTEST - component weight: 0.2 to 30 kg - maximum rotor diameter: 400 mm - maximum rotor height: up to 200 mm - compressed air pressure: 0.6 MPa - balancing machine dimensions: 1200 x 1200 x 1500 mm - control panel dimensions: 600 x 600 x 1800 mm - weight: 500 kg

Description Shredding Line Single shaft shredder TPA type MCE year 2004 power 147 kW Rotor length 1500 Rotor diameter 400 Feeding conveyor belt Overbelt separator Gauss Magneti SM 69.45 year 2016

Description Single shaft shredder Rotor length 1500 Rotor diameter 400 Motor power 80,5 kW

Description Granulator Rotating blades 3 Counter blades 2 Rotor length 1000 Rotor diameter 650 Open rotor Motor power 75 kW

Description Folcieri GRANULATOR Rotor Diameter 530 Rotor Length 1000 Hopper dimension 1000 x 700 Knives 3 + 2 Screen 12mm Motor 110 kW Fan Soundproof booth 3 spare set of blades and acounterblades

Entrideting machine Bar Gar Bg9a min130mm/ max 900mm motor 30 kw Rotor on ball or raderlager, rotor with 5 or 6 Formwork knives, switchboard mi control panel

Agitator,stainless steel,Rotostat,on foot,2 kW motor,Ø 125 mm. 3-bladed propelller.

Description Granulator complete with mill, vacuum cleaner and big bag filling structure. Number of blades: 3 + 2 fixed Rotor diameter 500 mm Knives length 800 mm Cutting chamber dimensions: 800 x 750 Size of the mouth: 700 x 650 Motor power 30 kW