rotator used for sale

CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel

Fork carriage, rotator for wheel loaders, forklifts, telescopic handlers, forklifts, rotator, forklift rotator -Manufacturer: Stabau, forklift rotator 360° continuous rotation -Type: unfortunately without a type designation -Load capacity: approx. 2,500 kg -Mounting dimensions: see photos -Dimensions: 1050/205/H755 mm -Weight: 353 kg

Technical data: Max load: 60 to. Container diameter: 500-4000 mm Rotation speed: 130-850 mm / min Roll diameter: 400 mm Roll width: 210 mm

Technical data: 1 drive unit / 1 revolving unit maximum load 20 to. Roll diameter 470 mm Roll width 250 mm Drive unit dimensions 2800 x 1300 x 1600 mm Unit 2800 x 1100 x 1600 mm, running with dimensions

Hydraulic motor, oil motor, hydraulic pump, compact rotators, oil-hydraulic drive -Manufacturer: Thumm, oil hydraulic drive Type 211 -Mounting holes: Ø 30 mm -Dimension: Ø 175 x 320 mm -Weight: 23 kg

Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.

Load capacity: 4.5t, shaft diameter: 68mm, max. hydraulic pressure: 370bar, rotator flow rate: approx. 25-40l/min, torque: 850Nm, bending moment: 3000Nm. An on-site inspection is possible.

TURNING ROLLERS LAMBERT JOUTY CZ100 max load capacity 100 tons auto alignment good conditions, ready to work!

weight max.: 100 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 240 mm feed: 100 - 1000 mm/min total power requirement: 2 x 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm drive motor: 2 x 0,55 kW total power requirement: 1,1 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-40330-73

Auction-ID: A1-47395-1027

Robust, high-quality rotary device for cylindrical workpieces (boiler roller set) with polyurethane coated steel rollers, infinitely adjustable rotation speed, high frequency protected, right and left run, the largest load capacity of the two units together 10,000 kg, Workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.18 kW, drive rollers made of steel dia. 250 x 160 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see illustrations, weight of the set (driven and non-driven unit together) approx. 270 kg

weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 Kg workpiece diameter: 20 - 800 mm drum diameter: 200 x 50 mm feed: 80 - 1600 mm/min total power requirement: 0,23 kW dimensions of the machine ca.: 2 Stk. 0,45x,039x0,33 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device -Table: is tiltable -Maximum load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm -Drive: 0.1 kW -Speed: RPM -Quantity: 1x welding rotator available -Price: per piece -Dimensions: 830/450/H920 mm -Weight: 174 kg

Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table -Manufacturer: Gieseking, Motorized welding rotary and tilting table -Type: SD 1 -Load capacity: 1 ton -Rotational movement: electrically continuously adjustable 0-1 rpm -Faceplate: Ø 1010 mm -Three-jaw chuck: Ø 290 mm, bore Ø 74 mm -Faceplate: motor-tiltable -Transport dimensions: 1750/1170/H1620 mm -Weight: 1392 kg

weight max.: 1000 Kg workpiece diameter: 20 - 800 mm drum diameter: 200 x 50 mm feed: 50 - 2000 mm/min weight: 65 kg total power requirement: 0,6 kW dimensions of the machine ca.: 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 Kg workpiece diameter: 20 - 800 mm drum diameter: 200 x 50 mm feed: 50 - 2000 mm/min weight: 65 kg total power requirement: 0,6 kW dimensions of the machine ca.: 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device on rail chassis -Drive motor: -Load capacity: 3500 kg -Roller spacing: 280 - 1230 mm -Rollers: Ø 255 x 50 mm -Rolling speed: 0.0 to 0.75 m/min Right/Left rotation, Left rotation -Control unit: with hand control and foot pedal -Individual components: see photos -Transport dimensions: 1205/2330/H1010 mm -Weight: 830 kg

Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: HEINRICHSGLÜCK, swiveling welding rotator -Type: DK1.000-P800 -Load capacity: see photo of the nameplate -Control: via foot pedal -Three-jaw chuck: Ø 380 mm, three-jaw chuck bore Ø 150 mm -Base plate: Ø 800 mm -Speed: 0-1.5 rpm Right/Left rotation -tiltable: via geared motor -Transport dimensions: 1430/1040/H1175 mm -Weight: 913 kg

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device -Drive motor: 0.4 kW -Load capacity: 6500 kg -Roller spacing: 290 - 940 mm, rollers Ø 250 x 145 mm -Rolling speed: 0.20 to 1.25 m/min Right/Left rotation -Control unit: Manual control -Individual components: see photos -Transport dimensions: 1070/835/H800 mm / 1020/680/H3270 mm Total weight: 858 kg

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device Welding Rotating Device Type W05 -Drive motor: -Load capacity: 9500 kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 395 mm -Rolling speed: 0.2 to 1.45 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 2770/1120/H560 mm / 2350/990/H560 mm -Weight: 2510 kg

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Walter Gieseking, Container rotating device, Welding rotating device type SG1 -Load capacity: 1200 kg -Roller spacing: 187 - 1000 mm -Rollers: Ø 175 x 50 mm -Rolling speed: 0.2 to 0.85 m/min Right/Left rotation -Control unit: with manual control, speed control via handwheel -Individual components: see photos -Transport dimensions: 1610/570/H330 mm / 1250/300/H330 mm -Total weight: 217 kg

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device -Drive motor: -Load capacity: 14,000 kg -Roller spacing: 440 - 1800 mm -Rollers: Ø 400 mm / 400/60-305Z -Rolling speed: 0.3 to 1.6 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 2930/12170/H645 mm / 2620/840/H620 mm -Weight: 1800 kg / 1150 kg

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device -Drive motor: 0.27/2.7 kW -Load capacity: 120,000 kg -Roller spacing: 660 - 3070 mm -Rollers: Ø 600 mm -Rolling speed: 0.006 to 3 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1250/4550/H1010 mm, 1040/3960/H1010mm, 560/1240/H480 mm -Weight: 9280 kg

weight max.: 15 t workpiece diameter: 600 - 6000 mm gear diameter: 520 mm voltage: 400 V total power requirement: kW weight of the machine ca.: 800 kg kg dimensions of the machine ca.: 5500 x 1500 x 1050 mm Only Idle unit! Equipped with rail rollers (can be dismantled if not required) Unit equipped with electric motor to modify distance between roller centers. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

The machine is equipped with a closed driver's cab, which provides better protection for the operator during indoor and outdoor work. The forklift belongs to the 3000 kg class and is suitable for a variety of industrial, logistics and warehouse applications. Wideview mast. automatic transmission. An important plus is the rotator present. This allows the absorbed load to be rotated hydraulically, which makes this forklift particularly interesting for applications where bins, containers or other loads need to be tilted or rotated. The forks and rotator are included in the sale. It is also equipped with industrial tyres, hydraulic controls, automatic transmission, wideview mast, vertical exhaust, work lights and windscreen wiper. The machine is in clearly used working condition. Traces of use, paint damage, oxidation and local rust are visible all around, commensurate with the age and prof ...

equipped with Manitou telehandler adapter, fork length 1200 mm, fixed box holder frame, fork width adjustment Auction-ID: A1-50597-102

equipped with electric hydraulic control, radio remote control, frequency controlled rotation speed + leveling, number of rotations adjustable Auction-ID: A1-50597-17

hydraulic connections; fork length 980 mm; Auction-ID: A1-50707-256