rotation used for sale

CIRCULAR SAW Mod ALTENDORF F45 machine suitable for cutting plastics and solid wood CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3400 max. blade mm.500 blade group inclinable at 45° max. cutting height with 90° blade = mm.175 max. cutting height with blade at 45° = mm.123 saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1100 Volt. 380/50 Year 2003

AUTOMATIC COPY SHAPER machine type BALESTRINI JUNIOR second hand machine conditions : Excellent, machine like new CE mark : YES with tools : YES with safety protections and instruction booklet machine composed by n. 02 working units max. working length mm. 1400 max. working height mm. 180 max. working width mm. 500 tools rotation speed rpm 8400 feed speed of carriage : from 0,5 to 15 mt/min retun feed speed carriage mt.min. 70 spindle motors power Hp 10 x 2 hydraulic pump motor power Hp 4 volt. 380/50

The JAFO FYN 50 ND CNC milling machine was produced by Jarocińska Fabryka Obrabiarek S.A. in 2007. The machine is equipped with the working table of dimensions (W x L) 500 x 1400 mm and CNC control HEIDENHAIN. The numerical control allows to work in an automatic cycle with a circular or linear interpolation in three-dimensional space. Machine feeds in the X/Y/Z axes are 800 mm, 500 mm and 500 mm respectively. The CNC milling machine weighs 4500 kg. A fourth axis can be connected to the machine control panel. Technical specification of the JAFO FYN 50 ND machine - CNC control: HEIDENHAIN - working table surface (W x L): 500 x 1400 mm - feed rates in the X/Y/Z axis: 800/500/500 mm - stepless feed rate adjustment - spindle nose: ISO 50 - stepless regulation of spindle rotation speed - metering lubrication system - guide rails lined with TURCITE B” material - hydromechanical q ...

FKS 250-1300 Circular sawing machines Max blade D.: 254 mm Be hem length 1250 mm RIP fence cutting width 610 mm The length width 845 mm Blade tilt 90 ° /-45 ° Table dimensions (L x W) 650 x 350 mm Table height 835 mm Blade rotation speed 4000 1/min Engine: 1, 5kW 230V Dust nozzle D.: 100 mm / 30 mm Weight: 142kg G & PIECES 5902030

Working range Diameter of the legs: 350 mm Rotation diameter: 360 mm X-trajectory: 725 mm Z-trajectory: 547 mm Y-trajectory: 307 mm Main spindle Spindle flange in accordance with DIN 55026: size 8 Spinning bearings - ? front: 120 mm Maximum speed: 6000 rpm Main drive AC motor 40% ID: kW 45 Maximum power: 58 kW Full power from spindle speed: 480 rpm Moment 40% ID: 480 Nm Maximum moment: 620 Nm Transport drive High speed X/Y/Z: 45/45/30 m/min Transport force in X/Y/Z: 5,5/11/11 KN Ball roller spindle in X/Y/Z: 40 mm Revolver star Intake cylinder shaft DIN 69880: 4 gang Shaft ? 40 mm Grinding spindle 1: HSK C63, U/min 9.000, kW 19 Grinding spindle 2: HSK C32, U/min 42,000, kW 7.5 hydr. Grinding spindle: U/min 32,000, kW 0.9 Electrical equipment Operating voltage: 400 V Control voltage ? DC: 24 V Control voltage ? AC: 230 V Frequency ? 50 Hz Sizes and weights Length: 5060 mm Width: 1960 mm H ...

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg

Cylindrical grinding machine make RIBON type RUR-E-1000Year 1984Tip distance: 1000 mmTop height above table: 160 mmGr. grinding diameter: 320 mmhöchstzul. Weight between the tips: 70 kghöchstzul. Weight flying: 20 kgNormal size of the grinding wheel: 355 (410) x32x127 mmhöchstzul. Width of the grinding wheel: 60 mmDrm. the workpiece spindle bore: 24 mmMorse cone of the workpiece spindle: No. 4Morse cone of the tailstock: No. 3Morse taper of the red. Sleeve of the workpiece spindle head: no. 3Rotation speed of the grinding spindle: 1700/2100 rpm.Rotation speed of the workpiece spindle: 35-310 rpm.Table feed: 190-300-380-470-600-940 mm / p.Mautomatic grinding wheel feed p. Table turn: 0.005-0.01-0.015 mmGrinding wheel feed by hand lever: 0.005 mmGrinding wheel feed at each graduation of the handwheel: 0.005 mmMicro fine feed per line: 0.001 mmTilting of the table for taper grinding betw ...

Technical data: -max load capacity 300 kg -maximum clamping diameter approx. 1500 mm -Chuck diameter 300 mm -Bore hollow shaft approx. 60 mm -Rotation Electr. infinitely variable - right - + links - course -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 800 x 1150 x D 700 mm -Weight approx. 500 kg

Optical Profile Grinding Machine Fabr. HOMMEL Werke Type OPSMMasch. -No: 326 built in 1970infinitely adjustable magnification 10:1 to 50:1usable projection area 380 x 420 mmClamping area 450 x 200 mmlargest sandable workpiece thickness 85 mmInclination up to 30 °Rotation of the grinding head + - 15 °Swiveling of the grinding head + - 10 °Grinding wheel diameter min./max. 100 / 150 mminfinitely variable speeds 2800 - 5000 rpm.Connected load 2.0 kWWeight approx 1.7 tlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -Spindle mount MT 3 -Right - left rotation -Drilling spindle stroke 150 mm -Spindle speed continuously variable 80-1170 U/min -2 feed 0,1 / 0,2 mm / Rev -Throat depth 290 mm -max distance table - spindle 780 mm -Table with 2 T-slots 480 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.9 / 1,3 kW -Space requirement approx. B 600 x H 2100 X 900 mm -Weight approx. 420 kg -with:-coolant system -Keyless drill Chuck 1-13 - lighting

Technical data: -max load capacity 250 kg -Faceplate dimensions 500 mm -Faceplate you. Swiveling via Handwheel 0-135 ° -Rotation infinitely variable 0,01-4 U/min -Right - + reverse - transmission welding current approx. 400 A -Drive 220 V 1,1 kW -Table height in horizontal position approx. 800 mm -Space requirement approx. B H 600 x 500 X 1100 mm -Weight approx. 200 kg

Rotary table flat grinding machine with vertical spindle make LODI / DORMAC type RV 600Machine -No: 1916 built in 2001Technical specifications:Table diameter: 600 mmmax.processing diameter: 600 mmmax.grinding height: 350 mmGrinding wheel diameter: 325 mmRotary table speed: 10 - 20 rpmautomatic vertical feed path: 0.005 - 0.02 mmDrive power spindle motor: 6.0 kWDimensions: 1700 x 1500 x 1900 mmWeight approx: 1700 kgwith- complete Cooling device- vertical ropes- man. Dressing device- automatic vertical feed synchronized with table rotation- T-slots in the table- Additionally screwed on magnetic plateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAH ...

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm or square 80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Hydr. Metal circular saw make KALTENBACH type KKS 401Machine -No: 113025 Year 1991Saw blade size: 375 - 425 mmCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 x 120 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmCutting width: 5.0 mmSaw blade hole: 50 mmSaw blade feed speed: 0 - 1200 mm / min.Opening stroke of the vice: 160 mmTurntable adjustment stepless: + - 60 °Cutting speed: 10 - 60 m / min.Drive power: 5.5 kWWeight approx: 1.35 tOutside dimensions approx: 1360 x 720 x 2100 mmWith- aut. duty cycle for straight and oblique cuts- mot. Transmission adjustment- hydr. Drehtischklemmung- hydr. Turntable rotation- mot. saw gear adjustmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer an ...

CIRULAR SAW type SCM SI 400 EP NEW machine . prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - manual, semiautomatic and automatic mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50 YEAR 2022

AUTOMATIC BORING MACHINE Type VITAP 212 n.02 boring heads ( n.21 mandrins each one ) horizontal and / or vertical boring pneumatic tilting lateral reference fences 45° deg. horizontal boring Technical Details : n.21 mandrins ( x2 ) centre distance between mandrins mm. 32 mandrins rotation speed rpm 2800 n.02 motors Hp 2 each one net weight kgs. 600 Volt. 380/50

Machine is used for the processing of pipe and pipe components, including thread cutting in terms of the single and mass production. Diameter range of processable pipes: 70-290 mm Max diameter of processable work-piece: -Over stand: 800 mm -Over support: 450 mm Diameter of spindle hole: 300 mm Max turning length: -With bevel ruler: 800 mm -W/O bevel ruler: 420 mm Amount of spindle speeds: 12 Limits of spindle rotation frequency: 8-355 turn/min Amount of longitudinal and cross support servings: 32 Limits of: -Longitudinal servings: 0,064-1,025 mm/turn -Cross servings: 0,034-0,458 mm/turn Step limits of cuttable: -Metric threads: 1-12 mm -Inch threads (amount of threads for 1): 2-24 Max turn angle of bevel ruler: +- 10 degrees Overall machine dimensions: -Length: 3600 mm -Width: 1860 mm -Height: 1525 mm Machine weight with electric equipment: 9050 kg

1 milling machine-vertical used in console version Manufacturer Reckermann Type: CONSA V Year of construction: 2001 Control: HEIDENHAIN TNC 124 X-axis: 1000mm Y axis: 370mm Z-axis: 450mm Table size: 1300 x 400 mm Spindle retainer: SK 50 Max spindle rotation: 3600 RPM

Dauerbohrleistung: 25 mm Standard ALB ear performance: 30 mm Thread cutting performance: M 14 (option) Spindle: MK 3 Drilling depth: 130 mm Throat depth: 250 mm Infinitely variable spindle speed: 230-2700 RPM Table size: 460 x 360 mm Column diameter: 100 mm Total height: 1800 mm Weight: 230 kg Power supply: 400 v, 50 Hz Motor power: 1,5 kW Facilities: -Digital display for speed as standard -Light machine -Stepless speed adjustment with digital display -24 V electrical system -Height-adjustable spindle protector -Base plate with T-slots -Drilling table rack with worm gearbox - adjustable and swiveling around column -Reversers for R/L rotation (option gg. Extra charge) -Emergency off pushbutton -Motor protection -Star handle -CE compliant

Workbench drilling machine height capacity CINCINNATI type P310 Rotation from 400 to 20000 RPM Maxi height base/Chuck nose 200 mm Throat depth 120 mm Maxi drilling capacity: 5 mm Voltage 380 V Base dimensions: 200 x 530 mm Width 350 mm Depth 600 mm Total height 600 mm Weight approx. 50 kg MACHINE IN OUR STOCK IN FRANCE.

Kemper SPL75 Spiral Kneading Machine Spiral, dough crusher and stainless steel boiler incl. dust protection cover 2 clocks, 2 gears, clock for second speed runs with the first watch, so must be adjusted plus the first watch Feed and return of the boiler + pulse button for boiler rotation Machine in bakery condition, must be thoroughly cleaned before use Video about test run and other pictures available

X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

TO WHOM IT MAY CONCERN; WE'VE 2 PCS COMPLETE WARTSILA 8L 38B ENGINES AT OUR STOCK ENGINES WERE USED AS PROPOLSUION ENGINES AT PAST TENSE PLS FIND ENGINES DETAILS ON BELOW. ENGINES USE HFO DURING RUNN?NG ENGINES CRANK SHAFTS HAS STANDART SIZE CLASS HARD STAMPS ON IT . YEAR OF BUILT 2006 TYPE 8L 38B ROTATION CW & CCW kW 5000 RPM 520 ENGINES NO. PAAE027120 & PAAE027119 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Anko Stir fryer Model: KUP-60 SF60 2012 stainless cooking tumbler, capacity 60L, gas fired, tilting vessel, adjustable speed, temperature and timers, two direction rotation, ideal for rice, noodles, roasting seed and nuts, coating sweets, confectionery and jams etc

X-AXIS STROKE: MM 1,600 Y-AXIS STROKE: MM 810 Z-AXIS STROKE: MM 630 TABLE SIZE MM 1,750 x 770 ATTACK: ISO40 SPEED ROTATION REVOLUTIONS/MIN 15,000 REFRIGERATION THROUGH THE SPINDLE TOOL N ° 50 CONTROL: SELCA YEAR: 2008

PONAR ŻYWIEC SG-180FE-2B plastic mill built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main advantages of the device are its comfortable operation and low noise level during machine’s work. SG 180FE 2B granulator is equipped with 9 rotary knives and 2 fixed knives with a length of 180 mm, capable of milling up to 30 kg of plastic elements per hour. The machine is offered with dust extraction. Total weight of the machine is 120 kg. Technical data of granulator PONAR ŻYWIEC SG-180FE-2B - length of blades: 180 mm - number of rotary blades: 9 - number of fixed blades: 2 - capacity: 30 kg/h - maximum rotation speed: 940 rpm - throat depth: 200 x 220 mm - dust extraction - motor power: 1,5 kW - power supply: 380 V; 50 Hz - ...

CNC vertical jig boring machine WMW MIKROMAT Type BKoZ 900x1400/5NC Travel X 1120 mm Travel Y 710 mm Spindle travel Z 315 mm Travel W 630 mm Numerical Command CNC NUM 1060 Spindle Ø 125 mm Cone SA40 Rotation from 36 to 2240 RPM Table size 1400 x 900 mm Distance between colums 1080 mm Maxi distance spindle nose/table from 0 to 900 mm max Maxi eligible load on table 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage 380 V Dimensions (L x W x H) 4000 x 2460 x 3030 mm Weight approx. 9 T MACHINE IN OUR STOCK IN FRANCE.

Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of ​​homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. . The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Model  ...

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

KSN Drum Washer 3500H The machine is a drum washer designed for washing and drying parts. The parts are transported through the car wash with the help of a horizontal drum. The rotation speed of the drum can be adjusted via a frequency converter. Washing is carried out with hot water with the addition of a degreasing agent. Rinsing is done with hot water. Drying is done with hot air. Specifications Mechanical data External dimensions: L3183 x W1141.5 x H1436 mm Empty weight: 700 kg Capacity of the water tank: 210 liters Capacity of the rinsing tank: 210 liters Maximum water temperature: 70C Maximum air temperature: 170C Suction volume: 4-500 m³/h Drum speed: 0.8 - 5.1 rpm Electrical data Connection voltage: 3x400V +N +PE, 50Hz Rated current: 60 A Maximum fuse: 63 A Maximum short-circuit current: 16 kA YOC 2007 Original price 65400,-€ Complete pla ...

HORIZONTAL MACHINING CENTER NR. 2 KITAMURA HX500I WITH FATESYSTEM SHUTTLE Features: X-AXIS STROKE: 870 MM Y-AXIS STROKE: 710 MM Z-AXIS STROKE: 660 MM 4TH AXLE (ROTARY TABLE): 0.001-360 ° TABLE: 500 X 500 MM MAX PERMISSIBLE LOAD ON THE BOARD: 800 KG SPINDLE CONE: ISO50 ROTATION SPEED: 12,000 RPM GAMMA CHANGE: 2 GEAR RANGES FAST FEEDS: 50,000 MM/MIN TOOL CHANGE KITAMURA 1:100 SEATS TOOL CHANGE KITAMURA 2:50 SEATS CONTROL: FANUC 16 iM SHUTTLE FASTEM SYSTEM TO 16 STATIONS

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

Mot. - Ring - Bow - Bending machine Offer number: 15252 Make: KNUTH Type: MSB 30 Machine No: 121217 Built: 2000 Technical data: - horizontal working position - 2 mot. driven rollers - manual vertical delivery of the upper roller - Lifting top roller up to 30 mm - Shaft diameter 40 mm - Wave length 35 mm - Wave rotation 12 rpm - Roll diameter 76 - 88 mm - Drive 400 V 1.1 kW - Bending power approx. - Round tube 30 x 1.5 mm - Flat steel 30 x 10 mm - E - foot button for right / left - run - Round tube roller set approx. 23 mm - Weight approx. 150 kg - Space requirement approx. W 700 x H 1150 x D 650 mm

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

Stock# U2397-1 Used stainless steel twin shaft paddle mixer by V.V.S. DI VISCONTI SRL (Italy) model I1500SF with total volume of mixing chamber 2500 l. Working volume in range from 1500 l up to 1700 l. Weight of batch up to 1500 kg. Machine has internal dimensions of mixing chamber W 1100 mm x L 2870 mm x D 900 mm. Shafts are driven by el. motor 22 kW, 1470 rpm, 400-600 V, 50 Hz, via reducer and belts. Working rotation of each shaft is 33,5 rpm. Mixer has top open. Discharge through one outlet with dimensions 500 mm x 200 mm, in front wall. Outlet is equipped with pneumatically operated lid layered with teflon. Mixer has stainless steel lifting device for work on rectangular containers with volume 200 l and width 660 mm. Lifting device is operated electrically. Machine has technical documentation. Last time used in food industry.

1 banding machine with shrink tunnel Manufacturer: Urban Maschinenbau GmbH, Germany Type: SB 500 Fully automatic linear banding system to different types of products in groups and stacked high with shrink wrap to package. The banding system works with two film roles, cross sealed. Product feed with motorized infeed conveyor, linear Motorized film reel (top and bottom) Sealing and cutting through hot clamping with electronic temperature control Control Panel for easy control of all machine functions Direction of rotation of the machine: from left to right Ventilated electric cabinet Formats / products: Length: 200 mm Width: 180 mm Height: 210 mm Capacity: up to 2,400 products / h, depending on the product integrated heat shrink tunnel Tunnel width: 500 mm / tunnel height: 220 mm Electr. Supply: 380 V, 50 Hz Dimensions: approx. 2.5 x 2.0 x 1.8 m Weig ...

Column-Mounted Crane DEMAG Capacity 500 kg Arm travel 3400 mm Manual arm rotation Column height 3000 mm Column base diameter 700 mm - with base discs (see photo) Electric hoist I beam dimensions: 220 x 100 mm (see photo) Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg

Catalog number H0242 - new machine, in stock - CE certificate - max diameter of the blade 400mm - adjustable up / down wheel and 45 degree angle - cutting length 3200mm - cutting width 1350mm - Cutting height 90 ° / 45 ° - 120 / 75mm - trolley on steel bars - the diameter of the undercut 120 x 20 mm - saw blade rotation of 3000.4000.5500rpm - undercut speed of 9000rpm - 5.5 kW / 400 V motor - Subcutaneous motor 1,1 kW - digital display - electric saw setting Overall dimensions: - length 3220mm - width 3150mm - height 900 mm - weight 800kg - the table extension - widening the table - angle cutter Complete with main blade and cutting disc Net price: 20670 PLN Net price: 4921 EUR calculated according to the price of 4,20 euros (With higher fluctuations the price may change)

Stock# UG6276 Used vertical disc agitator/dissolver by Test SA (PL) type MP-11/1000Ex. Machine can work on 1000 l mixing pans and is equipped with disc agitator. Driven by motor 11 kW, 1440 rpm. Working rotation of agitator adjusted in range from 0-1000 rpm. Mechanical rising and lowering of agitator up to height 1250 mm. Dimensions: H 3180 mm x W 800 mm x L 1200 mm. Ex proof design - ExII2GcIIBT3. Includes technical documentation. New 2014. Mixing pan not included.

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm

working range without repositioning X: 2535 mm working range Y: 1300 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2200 Watt Plate thickness max.: 8 mm Beam on: 4.390 h Standard equipment: - Work range X-axis 2535mm for combined operation - Hi-Las high pressure cutting - Laser-cutting head with 5’’ lens - head quick change device - Programmable cutting gas/Pressure settings - Capacitive height regulation - Compact dust extractor - 2 sheet clamps - automatic tool change with 19 stations (21 minus sheet clamps) - Full rotation of all tools - NC-controlled, maintenance free 3-phase motor - Repositioning device - quick shut-down of hydraulic system - automatic machine shut-down - tool length compensation - chutes for parts 500 x 500 mm - punching slug suction system - metal forming possible - tool spray lubrication - Programmable stripper - adaptive stroke lengt ...