rotation used for sale

Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (length / width): 3065x1600x1900 mm weight of the machine ca.: 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine --------------------------------- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding uni ...

Description: 'Control unit: 840D Powerline Siemens Max. turning diameter: 324 mm Turning length: 600 mm Rotation diameter over bed: 680 mm Rotation diameter over cross slide: 565 mm Standard turning diameter: 250 mm Center distance: 635 mm Main spindle speed range: 25 - 5,000 rpm Main spindle drive power: 25 / 35 kW Max. torque: 370 Nm Spindle nose: 170H5 Spindle bearing diameter: 120 mm Spindle bore: 79 mm Max. rod diameter: 66 mm Usable rod diameter: 65 mm Max. chuck diameter: 250 mm Chuck diameter: 200 mm C-axis: 0.025° / 360 ° Counter spindle speed range: 35 - 7,000 rpm Drive power counter spindle: 25 / 32 kW Max. torque: 200 Nm Spindle bearing diameter: 90 mm Spindle bore: 57 mm Max. rod diameter: 45 mm Spindle nose: 140H5 Chuck diameter: 200 mm C-axis: 0.025° / 360 ° Tool turret: Number of tool stations: 12 pieces Number of driven tool stations: 12 pieces Speed range - driven t ...

max. wheel diameter: 80 mm gear width: 44 mm max. module: 5 min. module: Control: SIEMENS 840 C adjustment axis angle shaping sp. - wp table: -0,5 - +0,5 ° stroke range: 250-1.500 DH/min centre distance table/shaping spindle: -15 bis +170 mm max. stroke length: 55 mm max. helix angle: 45 max. tool diameter: 180 mm feeds:: feed rotation axis of workpiece (100 mm wp diam.): mm/min feed rotation axis of work piece (100 mm wp. diam.: 10-15.700 mm/min feed center axis of machine column: 1 - 3.750 mm/min : 23 kw voltage: 400 V operating frequency: 50 Hz control voltage: 24 V DC total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,6 m equipment · stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil m ...

Key data: 2600 mm, 900 mm, 80 mm

SPECIFICATIONS: CNC Editor BSolid Basis Working range X mm: 200 - 2600 Working range Y mm: 35 - 900 Working range Z mm: 8 - 80 BH17 autonomous spindle unit Configuration: 10 autonomous vertical spindles with 32 mm spacing, with tool holder system, of which: - 5 arranged in X-direction - 5 arranged in Y-direction 3 independent horizontal spindles, arranged in the X and Y directions, equipped with the tool holding system, of which - 2 double outputs arranged in the X-direction - 1 double output arranged in Y-direction 1 sawing unit with saw blade diameter 120 mm, clockwise rotation, fixed working direction in X-direction Key features: Saw blade Ø 120 mm Max. cutting depth: 25 mm Cutting thickness: 4 mm Clockwise rotation of the tools - tool fastening by screws Vertical pneumatic unlocking The control unit is designed to accommodate the electrospindle. ...

Used Filler KHS and Angelus 121L Seamer for cans up to 72000 cph Introduction to the Filler KHS and Angelus 121L Seamer In the dynamic landscape of beverage packaging the demand for efficient and reliable canning solutions is paramount Consequently enter the Rebuilt KHS Can Filler paired with the Angelus 121L Seamer a formidable duo tailored for high speed operations Originally manufactured in 1990 filler and 1993 seamer this system underwent a comprehensive rebuild in 2019 ensuring peak performance and longevity Exceptional Capabilities Designed to cater to the stringent requirements of the industry this powerhouse combination of the Filler KHS and Angelus 121L Seamer boasts exceptional capabilities With 94 filling valves and 12 seaming heads it delivers unparalleled efficiency accommodating cans up to 72000 pieces per hour Notably ideal for 202 204 x 602 0 35L formats it excels in hand ...

Number of spindles: 4 St. Number of tools: 11 St. Spindle diameter: 50,40 mm Spindle length: 285,125 mm length: 4000 mm width: 2000 mm height: 2200 mm Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjusta ...

Description: Fabrication number: S4C141101 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. part length: 480 mm Max. bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. Chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping ...

Description: Fabrication number: S4C132091 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. Part length: 480 mm Max. Bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. Chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping ...

Description: Fabrication number: S4AC0301 Operating voltage: 3 x 400 V Frequency: 50/60 Hz Rated current: 45 A Control system: SIEMENS SINUMERIK 840 D Rotation diameter over bed: 430 mm Rotation diameter over cross slide: 300 mm Max. turning diameter: 300 mm Max. part length: 480 mm Max. bar passage: 45 mm Center width (spindle nose to tailstock center point): 670 mm Distance main spindle to counter spindle: 720 mm Travel distance X: 160 mm Z travel: 510 mm Main spindle: Outer spindle diameter in the front bearing: 80 mm Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm Max. chuck size: 160 mm diameter Speed range: 0 - 6300 rpm (infinitely variable) Counter spindle (spindle 2): Spindle connection: KK 4 Outer spindle diameter in the front bearing: 70 mm Travel distance Z2: 510 mm Travel speed: 30 m/min Holding force: 6000 N Counter spindle clamping  ...

Key data: 800 kN

Engel e-motion 170/80 TL / New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of construction: 2020 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: New, unused production line with two Engel Viper 20 and Engel Viper 6 robots and an assembly line with optics Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot Interface Air Valves Air Core Pulls Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central l ...

Description: HOLZ-HER CUT 85  , Technical Specifications Model: HOLZ-HER CUT 85 Year of Manufacture: 2005 Voltage: 3400 V Serial Number: 25105515 Capacity: 4500x4500x85 mm Saw Unit Maximum Cutting Height: 85 mm Maximum Saw Blade Overhang: 97 mm Motor Power: 11 kW Saw Blade Diameter: 85 mm Rotation: 4100 min-1 Scoring Unit Motor Power: 2.2 kW Saw Blade Diameter: 180 mm Rotation: 6500 min-1 Saw Carriage Feed Speed: 0-100 m/min Return Speed: 100 m/min Width Stop Feed Speed: 80 m/min Feed Speed in EU: 25 m/min Return Speed: 80 m/min Clamping Units Cutting Length 3250 mm: 6 pcs Cutting Length 4250 mm: 7 pcs Cutting Length 5250 mm: 8 pcs Compressed Air Connection Power: 6 bar Air Consumption NL/Cutting Cycle: 32 serial number: 25,105,515, Approx. Onsite Dimension. (l x w x h): 7,650 x 5,250 x 1,980 mm, weight approx.: 4,700 kg

: neu : ca. 12 Wochen ab Auftrags : Italien : 145200 € : 2889.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...

Description: Dust-protected linear guide system Ball screw in X, Y and Z direction Digital drive system in X, Y and Z direction Stop cylinder for workpiece positioning Workpiece length: 200 mm - 3,050 mm 0245 / 0246 - Extension of the working length to 3,050 mm incl. roller conveyor Workpiece width: 70 mm - 850 mm Workpiece thickness: 8 mm - 60 mm 2999 - Machine-specific adaptation Workpiece weight: max. 35 kg 1202 - Drilling gear V13 High Speed Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: R/L Speed: 1,500 - 7,500 rpm - frequency-controlled Drive: 2.3 kW Drill bit holder: 10 mm for quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle type: individually controllable 1128 - horizontal drilling gear with 4 spindles in X-direction 1129 - horizontal drilling gear with 2 spindles in Y-direction 1012 - Grooving ...

CNC processing centre Brand: Vitap Type: Galileo 2 New machine Create great things on small space - the best kind of using 5m² production space With this 3-axis machine you can drill, mill and groove in throughfeed. Vitap Bar Nesting - efficient and time saving - This patented Software processes whole corpus elements out of one longer workpiece. - Just insert the workpiece and when you take the first finished element, the machine contues with the processing of the next element Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position ...

CNC processing centre Brand: IMA Type: BIMA 310V 120/600 Year: 2004 Technical data: Machining area - in X-direction without gluing 6000 mm - in X-direction motor gluing 5000 mm - in Y-direction 1200 mm - in Y-direction with main spindle + WZ-Ø 20 mm 1300 mm max. clamping height from Upper edge of suction plate Z1 100 mm max. workpiece thickness Z 2 depending on equipment/application Worktable height: approx. 950 mm 1 main spindle with feed stroke pneum. - Drive power: 12 kW in S-1 operation - Tool holder: HSK F63, taper diameter =38 mm - Tool feed: automatic - Pull-in force: 11000 N - Tool weight: max. 6 kg - Direction of rotation: right/left rotation, programmable - Speed range: stepless 1500 - 24000 rpm, programmable - Drive: frequency-controlled three-phase motor Spindle lubrication: unique factory grease lubrication - spindle cooling: water cooling  ...

New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...

CNC processing centre with 5 axes Brand: Cosmec Type: Conquest 715 New machine Just an example for a configuration, other equipment is available on request: High-precision CNC - centre with camera centering system. Ideal machine for milling works in digital print, wood- and plastics as well as in the advertising technique Gantry drive system 5-axis main spindle complete interpolating Moving route: - X - axis 4.850 mm - Y - axis 2.630 mm - Z - axis 880 mm Working table: Vacuum grid table system, made out of Sandwich-Bakelit and, consisting of: - 1 Upper plate with grid 50 mm, also the use of COSMEC vakuum cups is possible (vacuum cups optional available) - 1 Lower plate with rectangular chanels for ideal vacuum distribution Dimensions: X - axis 4.210 mm Y - axis 2.210 mm Table can be split in 2 working fields Each field with 3 workpiece stops in X - d ...

CNC boring- routering machine Brand: Vitap Type: K3 New machine Throughfeed process from the bottom and automatic panel return to the operator. Develop a new individual class: - With this machine you can do grooves and drill processings as well as different milling works, from simple edge milling to the milling of forms and letters. - There are no limits for your creativity Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position or just via click on the virtual workpiece Vitap Bar Nesting - efficient and time saving - This patent ...

System includes (1) Round Trough Vibrator Spaleck VA1451, working container volume: 140l, stretched container length: 2320mm, speed: 1460/min, container cross-section: 235mm, motor power: 1.3kW, space requirement: 2m², empty weight: 440kg, max. operating weight: 890kg, with two directions of rotation, operating hours: 149h. Operating weight: 890kg, with two directions of rotation, operating hours: 149h (2) Rotary Trough Dryer Spaleck VAT33, working container volume: 230l, heating power: 3.6/7.2kW, motor power: 1.6kW, empty weight: 700kg, max. operating weight: 1.2t, designed for automatic drying/separation process, optional pendulum flap for multiple workpiece circulation, with documentation, maintenance overdue, on-site inspection is possible.

Homogenizer IUL instruments masticator modell: µ-Prozessor technical details: engine: induktion rotation speed: 500 - 1500 rpm speed increaser: 1:6 strokes/Sec.: 3.0 - 8.5 / 50 Hz 3.0 - 9.9 / 60 Hz voltage: 230 Volt ; 50 Hz / 110 V ; 60 Hz Leistung: 270 Watt dimension: l x w x h: 420 x 262 x 322 mm weight: 20 kg

Ironing uniting machine System Dr. Datz Used Power up to 11000 Fl/h Direction of rotation: right - left Furnished for 0.33 l and 0.5 liter bottle

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Manufacturer: GORBREX Model: TKV 580 CNC New in: 2015 Condition: excellent, like a new one, equipped with a CNC control SIEMENS SINUMERIK 828 Location: our warehouse Rudniki, Poland Delivery time: ca. 12 months Technical details Max turning diameter: 8000 mm Max turning height: 3200 mm Max workpiece weight: 125 000 kg Table diameter: 7100 mm Max slider stroke: 2000 mm Max travel of cross slide: 4275 mm Table rotation range: 0,22 - 20,1 r / min Slide feed range: 0,0352 - 285 mm/min Rapid slide feed range: 2500 mm/min Feeds crossbeam: 300 mm/min Dimensions: 8615 x 17600 x 9800 mm Machine weight with electrics: 258 000 kg Weight without electrical equipment: 247 300 kg

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,

POREBA Model: TR 90 x 6000 Manufacturer: POREBA- Poland Model: TR 90 x 6000 Condition: very god, complete, no missing or broken parts Technical details: Distance between centres: 6000 mm Height of centres over bed: 435 mm Height of centres over carriage: 310 mm Swing over bed: 900 mm Swing over carriage: 570 mm Swing in gap: 1150 mm Turning length in gap: 390 mm Spindle bore: 105 mm Spindle taper: Morse’a 6 Spindle speeds number: 18 Spindle speeds: 7.5 - 380 rpm Numer of feeds without replacing wheels: 55 Longitudinal feeds: 0.13 - 4 mm Cross feeds: 0.065 - 2 mm Number of metric threads: 55 Range of metric feed strokes: 0.5 - 15 mm Number of inch threads: 55 Range of inch theads strokes: 2 - 60 /inch Number of main motor rotation: 1460 mm Engine power: 20 kW Lead screw stroke: 2 /inch Tapers linear twist: 10 Length of cutting tapers: 720 mm  ...

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW

Used line for smoothing, separation and drying of small-sized objects made of zinc alloy, brass, aluminum, carbon steel, stainless steel and steel. The line consists of: Temper mill vibration made by Ebra, model EVP-RA 315, new 2006: - Tank capacity of 400 L, - Working capacity of 265 L, - Depth 530 mm working channel, - Weight (without charge and cover) 680 kg, - Dimensions: A x H, fi 1320 x 1060 mm Separator made by Ebra, model TM-350 K, new 2006: - Payload 1000 kg / h, - Engine power of 0.37 kW, - The speed of rotation of the drum 21 rpm - Engine speed 142 rpm, - Transmission chain 5/8 " - Dimensions: width 1000 mm, depth 1200 mm, height 1600 mm Vibration dryer made by Ebra, model EVK-350, new 2006: - Drying tank capacity 300 L. - The capacity of the drying agent 100 L. - Width 380 mm working channel, - Weight (without charge and cover) 610 kg - Documentation avail ...

Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch

Technical data: Max load: 60 to. Container diameter: 500-4000 mm Rotation speed: 130-850 mm / min Roll diameter: 400 mm Roll width: 210 mm

OPERATING POSITION... HORIZONTAL PUMP SET SIZE . 90.1 CONSERVATION SILICONE OIL ROTOR . . . . . . . . . . . . . 1.2436 U80 STATOR . . . . . . . . . . . . . NBR-LM 778/60-ST MOUNT RINGS... 1.4571 TENSION ROD MATERIAL... 1.4301 JOINT MATERIAL... . V4A JOINT DESIGN... . CARDAN (PW) ABGEDIC. CUFF... NBR TISSUE JOINT OIL... White oil EXTRA SHAFT SEAL... SPECIAL VERSION SUCTION CASING... V4A SUCTION... DN100/PN16-V2A SUCTION LOCATION TOP GASKET... NBR OUTLET... . DN100/PN16-V2A DRIVE flange [mm]... 250 Drive shaft [mm] 40 SHAFT MATERIAL... V2A LINEUP SPECIAL VERSION PUMP PROTECTION... WITHOUT ROTATION LINKS PUMP IDENTIFICATION... CHEEKS NAMEPLATE... STANDARD SURFACE PROTECTION... STANDARD C1 FARBE . . . . . . . . . . . . . RAL 9006 WEIßALU DRIVE... STIRNRADGETR.MOTOR DRIVE GEARBOX TYPE SEW RF77 ENGINE TYPE... DRE100LC4 PERFORMANCE... 3.0 KW SPEED at 50 Hz [ ...

NEW MACHINE With Formatschiebetisch 2, 60m Saw blade 250-315 mm Swivel: 90 °-45 ° Planing width 410 mm 4 cutter Blade (no setting more) Dressing table length of 1800 mm Clearance height of 4-225 mm Milling cutter: 90 °-45 ° swivel to the rear Blower rpm: 3000/4000/5000/6000 / 8000 and 10000 RPM Vertical lift 160 mm Engine power: 3 engines 3 KW400 V (4,0 PS) S1 100% continuous operation WJ-500300 Special price: NET Options: Before scoring unit with motor Guide fence 900 mm Integral safety rail 500 mm Westcott Chuck 0-16mm Milling Eccentric clamp Right - and left-hand rotation (BUR) Engine 4.0 KW (5.5 HP) S1 100% Planer blade 410 HSS G & WJ-BA-410-HSS

AUTOMATIC HYDRAULIC HORIZONTAL COPY LATHE Type BULLERI 110 / 4 MANDRINS N. 4 DISTANCE BETWEEN MANDRINS mm.320 MAX. WORKING DIAMETER mm.315 MAX. ADMITTED LENGTH mm.1200 MAX. WORKING LENGTH mm.1000 ROTATION SPEED rpm 4850 N.02 CUTTER MOTOR CUTTER MOTOR POWER Hp 7,5 each one HYDRAULIC PUMP MOTOR POWER Hp 1,5

AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50

Used self-cleaning disc centrifuge production Nagema SOZB-10 type. Capacity 8000 L/h. Rotation of the drum 6000 rev/min.

Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F

Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.

Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...

3-Breit-belt sander 1 roller rubberized 2. electron. Shoe with left and right rotation 3-step motor 3 electron. Shoe with infinitely variable belt speed programmiewrbares display 2-step feed Exhaust exhaust manifold Band blow-off device Vacuum carpet

Internal gear pump Manufacturer of Bucher Hydraulics Type QT52-050/51-100 L 252-5 HPN 692337 PD 180/100 bar VG 050/100 cm³/rotation Nr 37381094 Used

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Manufacturer: UNION - Gemany Model: BFT 130 / 5 Condition: very good New in.: 1978 / 2000 , the machine was completely modernized for Company ALSTOM Control: conventional with Heidenhain Linear readings in 3 axes Technical details: Spindle diameter: 130 mm Spindle speed: 4.5 - 900 rpm Spindle cones: MORSE 5 ( the price of the machine will deliver free of charge adapter for ISO 50 ) X axis: 1600 mm Y axis: 1600 mm Z axis: 2500 mm W axis: 1000 mm Table: 1600 x 1400 mm Table Rotation: 360 Charging the table: 8000 kg Speed: 4.5 to 180 rpm Power range: 0.63 to 2000 mm / min Fast forward: 2 m / min Total required power: 35 kW Approximate Weight: 47000 kg EQUIPMENT: Heidenhain readings line in three axes, flat disc

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Used decanter centrifuge HYSEP type MD43C with carbon steel bowl and screw. Internal surface of bowl and screw flinge are lined with wolfram-carbide. Bowl has a main drive 11/12.5 kW, 1455/1755 rpm , 50/60 hz. Screw is driven by hydraulic motor with power 5.5 kW. Working rotation speed of bowl 2800 rpm. Maximal sludge density 1.2 kg/m3, working temperature up to 80C. Machine is mounted on integrated frame and is equipped with feeding pump, polimer dosing device and control panel. Bowl cover, discharges and drive covers are designed in stainless steel. Technical documentation included.

WEIBERT WJ-SAe-FR2 2.3 3-3.2 Formatschiebetisch: 2300 mm to 3200 mm) Cutting height: 103 mm Blade 90 °-45 ° swiveling. 315 mm Scoring unit: separate drive Milling spindle: swivel Blower RPM & #65279;: 1400/3500/6000 and 8000 min. Motor power: 5KW streaked 400V 50 Hz Saw: 4KW OPTIONS for an additional fee available! Integral safety rail 500 mm Left and right rotation Suction pipe with suction hose Degree grid system on the boom G & WJ-SAe-FR2 2.3/3.0/3, 2m SPECIAL PRICE PLEASE REQUESTS! OPTIONS for an additional fee available!

FOR SALE... 7 SETS-WARTSILA DIESEL 16V25 KW3800 YOB 1998 ENGINE AT TURKEY TO WHOM IT MAY CONCERN; WE VE 2 SETS WARTSILA DIESEL 16V25 KW3800 YOB 1998 ENGINES AT TURKEY PLS FIND ENGINES SPECIFICATION AT BELOW. ENGINE TYPE 16V25 RATED POWER 3800kW RATED SPEED 900r/min ENGINE NO. 3963/4080/4081/4093/4094/4184/4185 ENGINE RUNNING HRS 52200-78000HRS DIRECTION OF ROTATION CLOCKWISE YOB 1998 WE VE ADDATIONALY WARTSILA DIESEL 12V25 ENGINE RATED POWER 2760kW RATED SPEED 900r/min SERIAL NO. 3711 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services : info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

1 factory-tested, well-preserved pillar jib crane Payload 1000 kg Projection about 6,360 mm Overall height approx. 3,350 mm Bottom bracket approx. 2,850 mm make of ABUS Workshop examination 2015 equipped with an electric chain hoist, floor operation on the boom moveable, and a new coat of paint Working speeds: Hoist around 1.0/4.0 m / min Trolley gear by hand rotation by hand The photos show a sample crane

CA 1962 Rotation slot - and die-cutting machine, strength of cardboard: 0,5-4 mm, thickness of the corrugated board: 3-7 mm, capacity (speed): until 3600 single cuts per hour, slots and booklet edge at side performed in a single pass, soil or cover can in one Operation individually, and with Zentralo cut twice, produced, additional delivery one cutting and creasing device can corrugated cardboard in a single punched, slotted, and grooved in one direction and cropped, automatic Waste ejection device, line 5301, Max: 1300x1200mm, min: 250 mm, 3600/hours