rotation used for sale

Inv. Num: 5302 Type: DL 10G Producer: Profika Generated: 2011 Parameters: Control system: FANUC 0iMATE-TD Maximum rotation length: 185 mm Max turning diameter: 170 mm Maximum spindle speed: 3500 rpm Lathe length: 1980 mm Lathe width: 1420 mm Weight: 2750 kg

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Operating hours: 21.500 - Axis speed [X axis] max: 90 m/min - Material thickness (punching) max: 8 mm - Control type: SIEMENS 840D - Compressed air pressure min: 300 bar - Turret rotation: 30 r/min - Oil tank capacity: 330 l - Axis speed [Y axis] max: 60 m/min - Working area max: 1.270 x 2.530 mm - Punching force: 230 kN - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

TECHNICAL DATA: Working width mm: 230 Planing height mm: 150 Infeed table length mm: 2000 Feedrate m/min: 6-24 Rotation speed max rpm: 6000 Number of spindles: 5 Spindle configuration: 01 - Planer wave - 7,5 HP 01 - Right spindles - 10 HP 01 - Spindles left 01 - Spindles top - 10 HP 01 - Bottom spindles - 10 HP Total connection HP: 42,75 Weight Kg: 2400 Feeding magazine

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Type Barmix 300 New! complete stainless steel 2 speeds (20 and 40 revolutions per minute) 2 rotation directions 3.3 / 4.4 kw fold-up inspection stairs Safety lid Emptying forward via an emptying flap with CE marking Outer dimensions (L x W x H) : 1,750 x 950 x 1,650 mm (open lid: H: 2,100) Loading height ± 1,350 mm Dimensions Drum (L x W x H) : ± 860 x 670 x 565 mm

The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

includes FMR6-5 Robot (Wemo) X: 420mm / Y: 1200mm / Z: 2.150mm / C: 90? Rotation 1 x gripper / 1 x vacuum incl. safety fences + conveyor belt 3000 x 600 - Screw diameter: 45 mm - Clamping force: 1.500 kN - Shot weight max: 272 g - Injection pressure: 1.568 bar - Injection volume: 286 cm? - Mould opening stroke max: 440 mm - Mould height max: 510 mm - Mould height min: 150 mm - Daylight between platens max: 950 mm - Distance between tie-bars (h x v): 510 x 510 mm - Control: Endura Touch - Core pulls: 2 - Weight: 7.500 kg - Dimensions (long x wide x high): 6.400 x 2.000 x 2.500 mm

Impact forming mill is used for dry and fine grinding of brittle materials with a hardness of up to 3 Mohs. the impact fine grading mill combines efficient impact grinding with efficient classification in one unit. The supplied materials are thrown into the liner by the milling tools at a speed of 60-130m/s and then shredded. the ground material is transported to the integrated cashier for processing by means of air and rotation of the grinding tool. the fineness can then be infinitely adjusted via the speed of the classifier. Particles that are too large are sorted out by classifiers and end up in the grinding zone for continuous comminution.

Used Molteni two-tank dissolver. The mixer has two tanks with capacity. 2,500 liters each. While mixing in the first tank, the second tank is emptied. Next the agitator from first tank is hydraulically lifted and transfferd to second tank. During mixing tank is rotated counter to the rotation of the dispersing disc. Hydraulic drive of the agitator. EX. Tank has a manual product scraper from the sides.

Unused carbon steel double ribbon mixer, 5500 L volume. Chamber dimensions: 4000x1600x1000 mm. Working volume 2500-3000 L. 3 triggers closed pneumatically or manually (pneumatic elements not fitted) 70 mm shaft. Engines used 9 and 11 kW. New gears. Rotation speed approx. 30x / min.

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

TO WHOM IT MAY CONCERN ; WE VE 2 PCS NEW UNUSED AIR STARTERS OF GALI AT OUR STOCK TYPE: A45L ROTATION : LEFT SERIAL NO : 0398 EX STOCK. READY TO TRANSPORT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Code: 0108 Brand: CENTAURO Model: T3-130 Hydraulic copying lathe for wood, stairs, frames, chairs, tables, etc. Automatic cycle turning system with one copier programmable to perform one or two passes Hydraulic copying unit with touch probe Max distance between centres mm 1300 Height of centres on pallet mm 226 Max diameter mm 250 Tailstock sleeve diameter mm 60 Tailstock sleeve stroke mm 100 Carriage feed speed mt/min 0/6 Carriage return speed mt/min 7,33 Spindle rotation speed rpm 900/1500/1800/2250/3000/4500 Spindle motor power Hp 5 Installed power Kw 4,8 Overall dimensions mm 3520 x 1190 x 1680 h Weight kg 1000

"Basket Centrifuge for material drying with top drying function and removable inside basket with screen for sludge liquid separation and drying, in very good condition, ready for use. Unit Specifications: - Basket capacity 60liters (φ500mm Χ 300mm) made out of Inox Stainless Steel - Removable basket 20liters (φ300mm X 300mm) made out of Inox Stainless Steel with 2mm screen - Top drying fan and 2.2kw resistance (single phase) for quick material drying - Total dimensions Length 700mm X Width 700mm X Height 800mm (total height including drying system 1300mm) - Basket rotation 1485rpm - Motor power 1kw (1,37hp) 3phase - Liquid exit 2 1/2"" inch - Good balance for minimum turbulance"

Sw BA35 Mobile Mating Work Center Reconditioned :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC version: 840D Tool attachment: iso 40 Spindle power: 22.5Kw Spindle Rpm: 10000 Number of tools: 36 X-Axis Stroke: 2650mm Y-Axis Stroke: 500mm Z-Axis Stroke: 500mm X Y Z Linear Axe Rapid Feeds: 40m/min Table size: 3600x500 ( 2x1800)mm Guides: roller CNC divider: yes Brand and partition model: Fibroplan Flange diameter: 340mm Rotation: continuous Chip evacuator: carpeted Machine equipment: 20 cones :::D IMENSION AND WEIGHT::: Length: 6300mm Width: 3200mm Height: 3200mm Weight: 12000Kg

X travel: 6300 mm vertical travel Z: 1700 mm transversal travel RAM Y: 1000 mm Ortogonal head, 2 spindles Automatic head rotation 1°/1° with hirt spindle taper ISO 50 CNC Heidenhain Machine in good working conditions

Ordering no: RE002 TECHNICAL DATA main saw diameter 300-550mm Height of the main saw adjustment vertically for a saw 0300 0-75mm for a saw ⌀350 15-100mm for a saw ⌀400 40-125mm for a saw ⌀450 73-150mm for a saw ⌀500 90-175mm for ⌀550 saw 120-200mm The height of the main saw adjustment at an angle of 45 ° for a saw ⌀300 0-50mm for a saw ⌀350 10-70mm for a saw ⌀400 28-85mm for a saw ⌀450 50-105mm for a saw ⌀500 63-122mm for ⌀550 saw 85-140mm Saw blade tilt 0-45° / (optional) 0-46 ° Length of sawing with an auxiliary table with the strip at the back of the table for a movable table 250 = 2500mm with a strip at the back of the table for a movable table 300 = 3000mm with the strip at the back of the table for a movable table 320 = 3200mm with the strip at the back of the table for a movable table 390 = 3700mm Sawing width using a bumper on an au ...

--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + V 30 AC-DC - Collaborative TIG welding - Welding machine: V30 AC-DC Cobot - Optional: digitally fully integrated cold wire feed EASY PROGRAMMING With the free-drive function, welders show the cobot where it should weld by hand – including intermediate waypoints and sections. Operators can then perform the tasks precisely with the help of the robot. The optional multifunction flange also allows programming directly on the 6th robot joint to avoid unnecessary walking distances. SECURE AND FLEXIBLE The safety concept consisting of laser and function probe ensures that the operator is not within the radius of movement of the robot arm ...

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

Code 61062 Description Hydr. Surface grinding machine Make DANOBAT Type RTS - 1600 Machine No. 16 220 Manufacturing date 1975 Table size 1800 x 550 mm Grinding dimensions L x W x H 1600 x 600 x 650 mm Magnetic plate size L x W 1600 x 550 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 750 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 15 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 10.000 kgs Total power 20 kW – 380 Volt Accessoiries Electro magnetic plate 1600 x 550 mm from Tecnomagnete Coolant Vertical grinding spindel Condition Machine is in good condition

Code 81199 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 504 Manufacturing date 1987 Table size 1400 x 450 mm Grinding dimensions L x W x H 1200 x 600 x 450 mm Magnetic plate size L x W 1200 x 450 mm Table speed movement 1 - 30 m/min. Max. distance table surface – centre grinding wheel 675 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1200 rpm Spindle power 7,5 kW Grinding wheel size Ø 450 x 50 ( 100 ) x Ø 127 mm Weight 6000 kgs Size of machine 3250 x 1850 x 2600 mm Total power 19 kW – 380 Volt Accessoiries Electro magnetic plate 1200 x 450 mm from Tecnomagnete Coolant Pendel control Condition Machine is in normal condition

Spindle diameter 3,000 mm Turnerable diameter 3,200 mm Maximum workable height 2,000 mm Weight allowed over spindle 40 ton Pump engine power 63 kW Spindle rotation speed 0.66-62 RPM Machine weight 86,000 kg Dimensions 9.345x5.120x6.030 mm

platform diameter: 1450 mm (HYDRAULIC - hydraulic spindle) maximum diameter of the piece: 1650 mm maximum height of the piece under the crossbar: 1200 mm - under tool holder: 1000 mm maximum workpiece weight: 11000 Kg mobile crossbar running on the plinth: 900 mm fast movement speed: 400 mm/min. slow displacement speed: 100 mm/min positioning accuracy on the base: +/- 0.1/100 mm main drive engine power: 60 KW platform advancement range: 2-280 rot/min number steps speed change box 3 work support stroke (X-axis): 1542 mm vertical stroke work support sled (Z-axis): 1200 mm sled section: 250x250 mm Milling shaft cone: ISO 50 milling engine power: 22 KW milling shaft speed range: 20-2000 rot/min X-Z axis work feed range: 1-4000 rot/min fast forward: 6000 rot/min C axis feed (slow-regimo milling rotation): 1-360 °/min X, Z, C: 45 N ...

3B161 shaft grinding machine built in the USSR, performs machining of rotating surfaces with high precision and quality along the entire length of the grinded workpiece. Distinguished for its exceptional reliability, the machine uses a large grinding wheel with a diameter of 500 mm, which is driven by a reliable 5.5 kW spindle. The XC3 3B161 grinding machine, thanks to its combination of a grinding wheel and claws with 1000 mm spacing, allows a significant reduction in machining time while maintaining high productivity. The shaft grinding machine weighs 4850 kg. Technical specifications of the 3B161 grinder - maximum workpiece length: 1000 mm - maximum workpiece diameter: 300 mm - grinding wheel diameter: ø 500 mm - maximum grinding wheel width: 60 mm - minimum grinding wheel width: 30 mm - grinding wheel spindle drive power: 5.5 kW - guaranteed elementary interval: 0.005 mm  ...

Table diameter: 1,200 mm Maximum turnerable diameter: 1,350 mm Spindle power: 47.7 Kw Maximum turnable height: 950 mm Table capacity: 6 ton Table rotation speed: 2.22 ÷ 200 rpm Vertical RAM wagon stroke: 1,000 mm Vertical turret wagon stroke: 760 mm Tilt vertical wagons: 35 ° Total weight: 16 ton CNC FAGOR 8055 Year 1979 REVISED IN 2009

Max diameter of the product processed over: bed, mm 2 500 support, mm 2,000 Smallest diameter of the workpiece, mm 500 Distance between centers, mm 12,500 Max weight of the processed product, kg 100,000 Spindle speed, rpm 0.8-50 Threading: metric (step), mm 2-96 inch (threads per 1") 20-3/8 Angle of rotation of the upper part of the caliper, 90˚ Speed of accelerated extension of the quill, mm/min 310 Accelerated movement of the tailstock, m/min. 2.9 Accelerated movement of the caliper, m/min 3.1 Longitudinal feed of the caliper, mm/rev 0.159-49.6 Ratio of longitudinal to transverse feed 2.5 Main drive electric motor power, kW 125 Machine dimensions, mm: length 20 900 width 4 350 height 3 280 Machine weight, kg 162,500

Spindle diameter: 1,100 mm Maximum turnerable diameter: 1,350 mm Maximum flow rate: 3,000 kg Total installed power: 29 Kw Table rotation speed: 200 rpm Maximum working height: 950 mm Tool turret: 5 positions

sheet width: 3100 mm plate thickness: 100 mm pre-bending: 86 diameter of upper rolls: 750 mm diameter of lower rolls: 700 mm side roll diameter: 600 mm power capacity: 132 kW min. bending diameter: 825 / 2750 mm weight of the machine ca.: 80 t dimensions of the machine ca.: 8,0 x 3,1 x 4,1 m 4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulic powered cover for easy material extracting - 2-axis digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm Optional Accessories: - variable speed of rotation (9.261 Euro) - material feeding table 1000 x 2000 (4.608 Euro) - center support (25.459 Euro) - 2 x side supports (15.796 Euro) The data for this ...

TECHNICAL SPECIFICATIONS Manafacture: COMAC Designation: Dust control system / nebulizer Type: Akkua Jet 65S Version: with 5 m articulated arm, on trailer Year of construction: 2012 Range: approx. 65 m (significantly more in the wind direction) Rotation: 0-360º (hydraulic) Vertical adjustment: -15°/+50° (hydraulic) Area coverage (theoretical): approx. 13,300 sqm Water consumption: from 1,500 to approx. 8,000 L/h Number of nozzle rings: 3 pcs. (separately switchable) Number of nozzles per wreath: 52 pcs. Total number of nozzles: 156 pcs. Fan power: 11.5 kW Water pump power: 4 kW Water filter: at 100 μm (stainless steel filter) Operating water pressure: approx. 15 - 22 bar Connection electrical: 400V/32A CEE Control voltage: 24 V Connection water: 1" F Average air velocity: approx. 38 m/s Air flow rate: approx. 30,000 cbm/h Degree of protection of the machine: IP ...

Key data: 500 mm, 200 mm

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...

table diameter: 1300 mm table load: 7,0 t swivelling range: 0 - 110° deg. table rotating: 360° deg. table turning speeds: 0,1 - 0,9 U/min height adjustment: 1040 - 1740 mm table drive: 2,2 kW hydraulic motor: 2,2 kW total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,80 x 1,55 m Hydraulic welding rotating and tilting table. - Adjustable speed - Remote control with a cable length of 5 meters - Digital speed display on the control panel for monitoring the rotation - Motors with brakes - Mechanical angle display (for tilting) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run bending program.  ...

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

Key data: 32 mm, 2 mm

Inv. Num. : 6997 Type: CMH 32 NC Producer: Cansa Generated: Parameters: Maximum tube diameter: 32 mm Maximum pipe wall thickness: 2 mm Maximum bending angle: 1900 st Power consumption: 4.4 kW Mandrel length: 2000 mm Max pressure: 120 bar Equipment: Hydraulic clamping Hydraulically controlled mandrel Hydraulic collet Colour touch screen Display of the current position of the pipe on the monitor (displacement and rotation) Display of the daily production on the screen of the control system Display error messages on the control system screen Saving created programs in the memory of the control system Ability to store up to 100 bending programs

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 5000 mm spindle bore: 146 mm spindle taper: DIN 55027/15 turning diameter in the gap: 1250 mm bed width: 700 mm quick change tool holder: Größe D1 spindle turning speed range: 3,5 - 1000, stufenlos U/min feeds - longitudinal: 1-3000 mm/min feeds - cross: 1-3000 mm/min rapid travel - longitudinal/face: 6000 mm/min thread - mm pitch: 0,5 - 480 mm thread - inch: 60 - 1/16 Gang / inch. thread - module: 0,125 - 120 voltage: 400 V / 50 Hz main drive: 30 kW Control: total power requirement: 35 KVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 7,2 x 1,75 x 1,9 m • new heavy duty lathe with infinetely variable rotation speed via frequency converter, • at basic price with normal accessories according to list, • possible special acccessories according to separate make-up. The dat ...

sheet width: 3100 mm plate thickness: 40 mm pre-bending: 32 diameter of upper rolls: 460 mm diameter of lower rolls: 420 mm side roll diameter: 360 mm power capacity: 30 kW min. bending diameter: 1380 mm weight of the machine ca.: 30,1 t dimensions of the machine ca.: 6,3 x 2,3 x 2,6 m 4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm Optional Accessories: - variable speed of rotation (5.325 Euro) - material feeding table (3.896 Euro) - center support (12.058 Euro) - 2 x side supports (11.258 Euro) The data for this ad was cre ...

table diameter: 960 mm table load: 3,5 t swivelling range: 0 - 110° deg. table rotating: 360° deg. table turning speeds: 0,1 - 0,9 U/min height adjustment: 1070 - 1800 mm table drive: 1,5 kW hydraulic motor: 1,5 kW total power requirement: kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,35 x 1,35 x 1,80 m Hydraulic Welding Positioner - Adjustable rotating speed - Remote controller with 5 meter cable length - Digital speed indicator on the controller panel for monitoring rotation - Mechanical angle indicator (for tilting) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m 4-ROLL Hydraulic Plate Rolling Machine Working length 3100 mm Maximum thickness Pre-bending 40 mm Bending 50 mm Yield Point: 240 N/mm2 Number of rolls 4 Motor Power 55 kW Min. diameter mm - Ø Top Roll Diameter x 3 Top roll Ø 540 mm Bottom roll Ø 510 mm Side roll Ø 440 mm Length 6700 mm Height 3000 mm Width 3000 mm Weight 40.000 kg With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Dual bending speeds Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the  ...

grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...

max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min.  ...

Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117 / 701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160 - 2250 UpM total power requirement: 1,45 / 1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pu ...

Mini excavator model KV 10 with cab+articulated arm and adjustable landing gear 78cm to 92 cm NEW - Finally assembled in Germany This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Color: YELLOW Operating weight: 1100 kg Overall Dimension(LWH): 2775mm930mm2219mm Digging bucket capacity: 0.025m³ Wheelbase: 910mm Bucket width: 380mm Total length: 1230mm Engine: KOOP 1-cylinder diesel Ground clearance of platform: 380mm Turning radius of the platform to the rear: 784mm Drilling stroke: Single-cylinder, air-cooled Chassis width: 896mm Main Pump: G5-6 Track width: 180mm Displacement: 6.8ml/r Chassis Ground clearance: 132mm Swing motor: SANYANG BMRS-250 Traction motor: SANYANG BMT-245 Track heig ...

Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 18 mm : M 12 : M 14 : MK 2 : 225-4.300 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel total power requirement: 0,37/0,55 kW Machine height: 840 mm weight: 110 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mini Excavator Model R319 Articulated Arm and Adjustable Landing Gear 78cm - 92cm NEW - Finally assembled in Germany This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Color: YELLOW Operating weight: 1000 kg Overall Dimension(LWH): 2775mm930mm2219mm Digging bucket capacity: 0.025m³ Wheelbase: 910mm Bucket width: 380mm Total length: 1230mm Engine: KOOP 1-cylinder diesel Ground clearance of platform: 380mm Turning radius of the platform to the rear: 784mm Drilling stroke: Single-cylinder, air-cooled Chassis width: 896mm Main Pump: G5-6 Track width: 180mm Displacement: 6.8ml/r Chassis Ground clearance: 132mm Swing motor: SANYANG BMRS-250 Traction motor: SANYANG BMT-245 Track height: 320mm m ...

Mini Excavator Model HT15 - NEW Finally assembled in Germany Product image is a symbolic image This excavator is suitable for small jobs / small projects in gardens, in the field, municipal works, vegetable greenhouses and designed for digging trenches. It has a small motor, a simple design and is easy to maintain. Weight: 1500 kg Grab bucket capacity: 0.025cbm/120kg Bucket width: 380mm Engine: KOOP 2-cylinder diesel Rated Power: 15kw Speed: 3.5km/h Dimensions Overall dimension: 2550x940x1380mm Wheelbase: 770mm Overall length: 1090mm Ground clearance of platform: 380mm Turning radius of platform to the rear: 733mm Chassis width: 940mm Track width: 180mm Chassis ground clearance: 380mm Track height: 320mm Workspace max. digging depth: 1650mm max. vertical digging depth:1375mm max. digging height: 2610mm max. dumping height: 1850mm max. digging radi ...