rotating used for sale

Disinfecting lock 8 pcs. They include: 1 Sole and upper washer – walk-through – angled brushes 550506 quantity 2 pcs. Data : Producer: AWE POLAND Sp. Z O.O. DTR -Yes Year of production: 2015 The device is made of stainless materials. Six rotating brushes: two horizontal brushes, four diagonal brushes with variable diameter. Washing shoe uppers up to a height of 350 mm. Water supply: 1/2. Water drainage: PVC ø 50 mm. Power supply: 400V, 50Hz. Automatic collection of cleaning fluids. The switch is located in the photocell 2 Sole washer, quantity 3 pcs Year of production 2015 Producer: AWE POLAND Sp. Z O.O. DTR -Yes Two rotating washing brushes, 900 mm long. The device is made of stainless materials Sole disinfection tank up to 3 cm high and drip grate. Water supply: 1/2. Water drainage: PVC ø 50 mm. Power supply: 400V, 50Hz. 24V control, IP67. Drive: 2 ...

1 Sole and upper washer – walk-through – angled brushes 550506 quantity 2 pcs. Producer: AWE POLAND Sp. Z O.O. DTR -Yes Year of production: 2015 The device is made of stainless materials. Six rotating brushes: two horizontal brushes, four diagonal brushes with variable diameter. Washing shoe uppers up to a height of 350 mm. Water supply: 1/2. Water drainage: PVC ø 50 mm. Power supply: 400V, 50Hz. Automatic collection of cleaning fluids. The switch is located in the photocell 2 Sole washer, quantity 3 pcs Year of production 2015 Producer: AWE POLAND Sp. Z O.O. DTR -Yes Two rotating washing brushes, 900 mm long. The device is made of stainless materials Sole disinfection tank up to 3 cm high and drip grate. Water supply: 1/2. Water drainage: PVC ø 50 mm. Power supply: 400V, 50Hz. 24V control, IP67. Drive: 2 x 0.25 kW, IP55. Washer width: 850 mm. Switching  ...

Mobile oscillating and rotating screening mill is used for the gentle comminution of heat-sensitive and difficult-to-process products down to fineness of 250 μm Incl. various accessories (screens, etc.) as well as 1 mobile HOVMAND drum lifting system with battery. Mobile oscillating and rotating sieve mill used for the gentle milling and deagglomeration of heat-sensitive and difficult-to-process products to a fineness of 250 µm. Incl. various accessories (sieves etc.) and 1 mobile HOVMAND drum lifting system with battery.

max. turning diameter: 33 mm max. turning speeds: 8.000 U/min Number of axles: 8 St. turning speed rotating tools: 6.000 U/min control: FANUC Dimensions (L x W x H): 4.020 x 1.850 x 1.925 mm machine weight ab.: 4.200 kg CNC Turning- and Milling Center | GILDEMEISTER - SPRINT 32 linear equipped with C-axis for mainspindle and counter-spindle and bar feeder Iemca Further information: - collet holder for main and pick up spindle - 5 position 16x16 toolholder for slide 1 - 3 driven tools on slide 1 with spindles ESX16 - drive for rotating tools slide 2 - 4-pos.tool holder diam.32mm for slide - 2-chip conveyor h=1100 mm - pneum. ejector and unloading system with belt -pneum. - cleaning system for counterspindle¬ - collet - Mechanical preparation for oil mist filter - electr. and software preparation for bar loader – synchronization between main and counter spindle - constant cutting spee ...

Tornos EvoDECO 16/10 CNC sliding head lathe CNC control Fanuc 31i-B5 Number of axles 10 Diameter of the spindle bore 16 mm Standard workpiece length with rotatable guide bushing 180 mm Spindle speed 0 - 12,000 rpm Spindle motor 12 / 9.8 kW Spindle speed counter Spindle 0- 12,000 rpm Minimum indexing C-axis main spindle 0.001° Minimum indexing C-axis counter spindle 0.001° Number of tools on the guide bush 10 | 2x 5 Positions of the tools on the guide bush 6 | 2x 3 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 0.55 / 1.1 kW Number of tools on the end device 4 Positions for rotating tools on end attachment 3 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 0.55 / 1.1 kW Number of tools in secondary operation 6 Spindle speed driven tools 100 - 8,000 rpm Spindle motor driven tools 1.5 / 2.2 kW Positions for Rotating Tools i ...

Description: serial number AB00022204 Max. panel length mm 3.050 min. panel length mm 200, Max. panel width mm 900 min. panel width mm 80, Max. panel thickness mm 60 min. panel thickness mm 10 max. X axis speed m/min 40, Max.Y axis speed m/min 40 vertical spindles - drilling head F14L (vers. P/PR) no. 8 (5X-3Y) - drilling head F23L (vers.P F23/PR F23) no. 13 (7X – 6Y) horizontal spindles - drilling head F14L (vers. P/PR) no. 6 (2+2X-1+1Y) - drilling head F23L (vers.P F23/PR F23 no. 10 (3+3X-2+2Y) rotating spindles motor power kW (Hp) 2,2 (3) spindle speed rpm 4.200 fixed integrated disc cutter (direction) X max. diameter of disc cutter mm 125 disc cutter rotating speed rpm 5.500 ELECTROSPINDLE motor power KW (Hp) 5,5 min./max. speed rpm 1.000/18.000 tool changer manual max tool diameter mm 20 for futher technical detail please consult document ,PDF STARTE ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 145200 € : 2889.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...

number of spindles:8 spindle passage:67 mm Machine type: CNC controlled multi spindle automatic lathe Manufacturer: MORI SAY Type: TMZ 8/67 CNC Yob: 2018 Double four-spindle machine, eight-spindle machine with spindles-drum locking by means of 3 HIRTH-type frontal rings and spindles set for HAINBUCH BZI SK80 collets equipped with twin CNC systems model SINUMERIK SOLUTION LINE 840D SL for the control of: indexing speed of the spindles drum with bar feed at station 1 speed and orientation of each of 8 main spindles speed and position of each of 8 frontal slides speed and position of each of 7 compound slides speed and position of the cut-off slide at station 8 for a total of 30 CNC-controlled axes, with the possibility of requesting further upgrades from the manufacturer. Machine equipped with the following optional items: BAR LOADER automatic bar feeder model PB 60 by CUCCHI BLT for bars  ...

Horizontal drilling unit Make: ATEMAG Type: HORI Function Line Technical data: Machine connection per request Speed max. 6,670 R.P.M. (drive) Speed max. 10,000 R.P.M. (tool spindle) Gear ratio i 1:1,5 Torque max. 15 Nm (drive) Temperature max. 85° C Tool interfaces ER 16 Mini, Weldon 10 mm Rotating direction left or right Rotating direction spindles alternating left/right Aggregate can be rotated 360° around drive Amount of spindles variable, depending on motor spindle and collision dimensions Available with different patterns for hinges etc. Accessoires included in scobe of delivery: Collet nut ER 16 Mini with collet connection Hook spanner

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit Possible execution: - spindle drive: for one or two gluing units - bayonet adapter: for one or two gluing units

CONTROLS   CNC controls HEIDENHAIN ITNC 530 BASIC DESIGN   basic design: moving column WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 3000 mm   Y-axis travel: 1000 mm   Z-axis travel: 700 mm   rotating range B-axis from: 105 °   rotating range B-axis up to: -105 ° SPINDLE / HEAD   spindle revolutions (max): 18000 /min   tool fixture: HSK A63   drive power: 23 kW TOOL MAGAZINE   magazin type: chain magazine   number of positions: 48 ELECTRICAL SPECIFICATIONS   total power consumption: 42 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 8500 mm  &nbs ...

CONTROLS   CNC controls SIEMENS 840 D SL TECHNISCHE DATEN   .. max.: 18000 /min   .. to: 30000 m/min   .. to: 30000 m/min WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 630 mm   Y-axis travel: 465 mm   Z-axis travel: 630 mm   rotating range C-axis from: 70 °   rotating range C-axis up to: -250 ° ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz X,Y,Z linear axes CU Gentry A Rotation axis SK50 n=1000 1/min C axis = -70 +250 Equipment: - Robot automation CU Fanuc M-10iA - Workpiece - Renishaw MP250 probe - Tool - Renishaw LP2 probe - Dittel balancing system P6001 - Dittel structure-borne sound system DM6000 - Haas-CU, including automation - Haas robot cell CU - Siemens 840 DSL handheld contro ...

CONTROLS   CNC controls GE FANUC SERIES 16 GC WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 350 mm   workpiece weight between centers (max): 130 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 350 mm   grinding length: 1000 mm WORKPIECE SPINDLESTOCK   spindle revolutions (min): 30 /min   spindle revolutions (max): 1000 /min   continuous speed variation: yes   c-axis: yes TAILSTOCK   distance betw. centers (max): 1000 mm SPINDLESTOCK GRINDING SPINDLE   Z-axis travel: 1000 mm   tilting range (B-direction) min: 0 °   rotating range B-axis up to: 210 °   drive power: 7.5 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 500 mm SPINDLESTOCK INTERNAL GRINDING   tilting ran ...

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch            ;     200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device  ...

Cutting Height - 250 cm, with small changes even up to 300 mm. Width - 450 mm. Feed continuously, up to 40 m / min. 2 moving sockets for 3 blades each and one middle socket is possible. Engines - 2 pc. each 45 kW Complete with round wood feeder. Wood rotating device and centering. Automatic remote control.

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: Number: about 30 passenger coaches technical data Passenger coaches 1st year of construction: 1977 to 1981 2. Weight: 33 t 3. Seats: 72, 2nd class 4. Longitudinal racks 5. Length over buffer: 23700 mm , 6. Side length 23400 mm 7. Rotary pin spacing: 17600 mm , 8. Rotating salmon distance: 2700 mm 9. Total axis distance: 20300 mm 10. Wheelset type: YRP and YRF All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, et ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Material: stainless steel V2A Engine: 0,25 kW Weight: 200 kg Length x Width x Height 1000 mm x 1000 mm x 900 mm Machine data: Machine in gas-proofed version, with rotating screen-frame; screening area per deck : 0,3 m². Optional: ballcleaning, sreen insert on choice : 0,1 - 2 mm. Very good condition. You can also get the entire system with all components.

STORK RHO40 homogeniser. 3800 l/hr, 250 bar, single stage. equipped with hydraulic operated rotating homogenising valve. fully reconditioned, excellent condition.

Cat. No. 12-1110 in a very good condition Capacity: 4000 litres/h Pressure: 10 bar Rotating speed: 1425 U/min Original Price: 3000€ Measurements and Weight: LxWxH: 82 x 38 x 105 cm Weight: 63 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Laboratory Candy pulling machine Application Sugar Pulling, Available 1 Kg, 2Kg & 5 Kg up to 50 Kg, the size of the engine is dependent on the size of the machine The action of the machine is derived from two driven arms rotating independently around a single fixed arm. The machine has one speed and pulling time can be set by means of a timer. The teflon arms are removable. This option is unique to this machine. It allows an easy cleaning. Safety guard automatic stopping with motor and starter Sugar Pulling Machine is mainly to aerated products like Chewy Toffees and others. This machine just stretch the gelatine based sugar mass and work air inside the batch. That avoid stickiness of the chewy Toffee at the teeth and give the product a spongee texture. The Machine is made for Laboratory trials and works batchwise, the product touching parts are made from stainless steel or te ...

Cat. No. 12-1135 in very good condition Measurements and Weight: HxLxW: 200 x 55 x 107 cm Weight: 135 kg Year of Construction: 1979 Temp: 18-40°C Motor capacity: 2,66 kW Rotating speed: 120 – 340 U/min. Pressure: 4-6 bar 3 kW 130 l/min., 7800 l/h 16,5 bar DN 100 DN 80 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Qty. 1 Second-hand cut-to-length line Mfc.: FIMI, SSW Type: Multiblanks line 1850x2.5 Built: 1995 Stopped: Strip width: 300 – 1850 mm Thickness: 0.3 – 2.5 mm Length: 300-8000 mm Line speed: 85 m/min. Coil weight: 22.5 T Scope of supply: 1. Load coil 25 ton 2. Coils centering 3. 25 ton unwind rod 4. Wire guide photocell 5. Table introduction aprirotolo 6. Group introduction 7. Cutter fly shear 8. 6° FIMI straightener 9. Apply film 10. Circular shear 11. Deceleration/Connection table 12. Wrap waste 13. Ansa passage table 14. Measurement wheel 15. Unique rotary shear 16. First evacuation conveyor 17. Second conveyor for evacuation 18. Scrap unit 19. Autom. wagon for pallet insertion 20. Stacker with palette and air breath 21. Evacuation chain with weight and semi-automatic strapping machine 22. Second evacuation chain 23. Hydraulic units 24. Electrical pan ...

Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller  for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Weight: approx.4500 KG mash. No.: 6517991 General/technical data: Vertical CNC machining center in a very good, almost new condition, first-hand with very little operating hours. Travel: X= 670 Y=450 Z=470 mm Rapid response: in X and Y = 24m/min, in Z =20m/min Spindle motor: 10 KW Spindle speed: from 50 to 4,500 rpm Spindle cone: SK 40 Control: Siemens 810 M GA 2 Dimensions clamping table: 900 x 420mm max table load: 300 kg Distance spindle head to top of the table: 630mm spindle center to stand face: 470mm Tool slots in the magazine: 24 pieces DIN ISO 40 max. tool diameter: 110mm to 125mm tool length 100mm to 280mm tool length Beuvvquh2i Dimensions of the machine approx.: 2200 x 3000 x 2950 mm (without operator, service and chip conveyor environment) Accessories/ Optional equipment: â?¢ external coolant system with 2 pumps â?¢ Chip conveyor with ...

Used EXTRUDER twin screw (TWIN SCREW EXTRUDER) for the production of cereal flakes: Producer: PAVAN Model: TT92 Year: 2002 Dimensions: 6580 x 4150 x 3000 Weight: 2400 kg Productivity: 500 kg / h Power: Description: A twin-screw extrusion device as a result of a continuous and automatic process of a great variety of flour and cereal starches / tubers, both mixed and pure. The materials from the dispensing unit are pre-mixed using a suitable device equipped with counter-rotating blades (double shaft mixer), and then enter the mixing tank for kneading and homogenization. From the mixing tank, through a suitable screw device (forced supply), the mixture is pressed into a group of cooking cylinders in which the cylinders are heated to the desired stage, according to a predefined and automatically controlled temperature profile. compatibility of extruder screws, which are repla ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

The machine is located in the purified and tested State -Stainless steel -new DGUV rule 3 / old version: BGV A3 exam for professional association -Shopmatic - program control -for 10 trays 60x40cm -2.4 m2 baking area -Electric rack rotating -Down with proofing Cabinet -Supply: 400 V, 27KW, 63A-CEE plug -Dimensions: W 1230 x T H 1200 x 2800 mm -Deep hood 1670 mm

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:for 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Description: Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and external Induction hardened and chromium-plated. The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpoint And the switch point at which the press should switch from empty journey to working speed, as well as the The end position to be used can be easily and q ...

Stack machine for lumber length 2.0 m to 5.5 m plant suitable for the formation of stack widths of 1.0 m to 2.0 m heavy duty for double packages with intermediate lift table. System Board separation, registration, user location clamp, rotating tongue, Zwischenhubtsich and package cross conveyor. Complete with control. Stacking machine for timerlength of 2.0 up to 5, 5 m. Heavy duty style for double package 1.0 m up to 2.0 paketwidth! Complete equipment from unscrambler, even ending roller conveyor, layerbuilding with hydraulic stopper lifting table for double package including stacking unit in between.

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:um 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated. The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the mo ...

CNC carousel lathe FKD 30, Siemens 840 dsl, machining range-diameter 3500, working height 3000mm, workpiece weight max. 25 tons, driven tools speed 0-3000 rpm, faceplatespeed 0 - 150 rpm, pickup station 5 places. Manufactured in the EU Remarks: 2columns carousel lathe with traversing cross beams, 1 piece ram for rotating and milling (ram 300mm x 300mm) with driven tools, ISO 50 C axis with master-slave bracing Filter system 3000 liters incl. high pressure pump 25 bar 3 chip conveyors

Manufacturer: Neolt Model: Electro Power Trim PLUS 250 Year: 2003 equipment: - electric rotary cutter with rotating circular knife - Cutting thickness up to 1.6 mm - Triggering of the cutting process by hand contact strip or foot pedal - Transparent pressure rail with which the material to be cut is held during the cutting process is automatically pressed - Illuminated cutting edge - Collection bag for clippings - Connection: 230 V/ 50 Hz - Dimensions: 2,950 x 500 x 1,050 mm (WxDxH) - Weight: approx. 100 kg Ideal for cutting paper, pop-up and other displays, laminated Printing, banners, tarpaulins and self-adhesive foils. The device works and was used very little. Availability: In stock Defects: none Price: on request

Italian manufacturer PFM Spa the horizontal packaging machine model SWIFT made for making packages of the type Flowpack. Packaging, wrapping or bagging all types of food like biscuits, balls, connected products, bars or non-food products., SWIFT can accommodate a wide range of products thanks to its adjustable forming box, offering the solution for fast and efficient size changes. The configuration change can be made in about 3 minutes, without compromising packaging speed. Horizontal packing machine with rotating sealing jaws, designed to wrap at speeds of up to 100 bags per minute. Model: Swift C8051 Pack lenght min 80 – max 350mm Pack width min 15 – max 180 mm Wrapping material: Heat or coldsealable , polypropylene, micro-perforated, different laminates power: 380V, 50 Hz, 3,1 kW Year: 2005 Very good condition

Two identical 625 KVA dynamic UPS systems UB-R III 625 piller for sale. 19.500 € for each aggregate plus VAT. FCA freely charged in D-Bergisch Gladbach. (uninterruptible power supply). Hybrid rotating/dynamic units. Uniblock UBR 625. The systems work perfectly, an annual maintenance was carried out by the manufacturer Piller. The facilities were also run quarterly for a few hours so that the camps would not be damaged. Brand: PILLER Type: UBR III 625 with battery Serial No.: 950 6005 689 Year of construction: 2009 Electr. achievement: 625 KVA Voltage: 400 V Current (A) Input data 1027 / 917 Initial data 902 Battery cells max 204 Battery (V) max 459

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

A rotating hot glue labeling machine is offered for the application of pre-cut paper or plastic labels. - Type: Rotary labeler. - Application: Only pre-cut hot glue labels. - Label magazine: fixed. - Possible labelling combination on the same labeller. - Suitable for handling cylindrical and shaped containers (rectangular, square, oval, etc.), even empty. - Production speed from 130 to 1200 bpm, depending on the model. This labeller has a continuous control of the amount of glue emitted as well as the temperature. There are two independent glue groups, one for distributing the glue on the container and the other for gluing the overlapping part of the label. The glue is distributed on a steel roller. Any amount of adhesive that exceeds the predetermined amount is recovered in a tank. The groups are heated by independent heating elements that quickly and evenly bring the ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of axis total: 4 Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 630 mm Vertical travel (z axis): 700 mm Dimension of the workpice: Width: 700 mm Table load max.: 500 kg Table divisions (B): 0.001 ° Table speed: 30 rpm Holding torque A-axis: 4000 Nm Tilting moment: 8000 Nm Pallets: number: 10 Length: 500 mm Width: 500 mm Maximum workpiece weight: 750 kg Time of changing palets: 7 sec Tool changer: Number of tools: 130 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 150 mm Tool lenght: 350 mm Max. tool-weight: 10 kg Time of tool changing: 2.5 - 4.5 sec Average chip-to-chip time: 4 sec Spindle nose SK: 40 DIN69871-A40 Spindle speeds: stepl ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series Technical data Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 520 mm Vertical travel (z axis): 510 mm Tool magazine number of tools: 64 Tool diameter max.: 78 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 300 mm Max. tool-weight: 5 kg Average chip-to-chip time: 3.3 sec Spindle nose: HSK-A: 63 DIN 69893 Spindle diameter: 70 mm Spindle speeds: stepless up to: 10000 rpm Feed range: 1 - 10000 mm/min Rapid traverse:: 60 m/min Max. Feed force: 7000 / 12000 N Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22 / 51 kW Total power required: 80 kVA Machine´s weight about: 9000 kg Overall dimensions machine: Length: 5027 mm Width: 2628 mm Height: 3278 mm Space requireme ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 27052 Technical data Number of axis total: 4 Number of spindles: 1 Table load max.: 500 kg Longitudinal travel (X-axis): 560 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 850 mm Diameter: 630 mm Table divisions (B): 360 ° Resolution: 0.001 ° Table speed: 40 rpm Holding torque of the table: 1580 / 2300 Nm Torque max.: 1550 Nm Pallets chanching device: Length: 400 mm Width: 400 mm Maximum workpiece weight: 500 kg Tool changer: Number of tools: 120 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 400 mm Max. tool-weight: 12 kg Spindle nose: HSK: 63 DIN 69893 Form A Spindle diameter: 225 mm  ...