We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
table diameter: 1525 mm table load: 5,0 t swivelling range: 135° deg. table rotating: 360° deg. table turning speeds: 0,05 - 1 U/min height adjustment: mm table drive: 1,5 kW total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 1,80 x 1,54 x 1,20 m Adjustable rotating speed Remote controller with 5 meter cable length Digital speed indicator on the controller panel for monitoring rotation Welding – chassis mechanism Mechanical angle indicator (for tilting movement) Motors with brake & forced fan cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The positioner SILVESTRINI Mod. SA 1 ORBIT EL T5nbsp; are composed by: HEADSTOCK Section The structure in rugged electro-welded steelwork, supporting a motorized (horizontal axis) rotation system.nbsp; The rotation is given by a gear motor that, by means of a pinion, meshes with a large slewing bearing, to which is fixed the ORBIT Structure. This sectionnbsp; is equipped with lateral precision guides to permit the ORBITnbsp; vertical lifting movement.nbsp; The elevation is hydraulic, by means of hydraulic piston on which are inserted special clamping safety valves, that prevent the fall of the table, in case ofnbsp; accidental breakage ofnbsp; tubes. On the horizontal axis is installed an electric rotating joint for the connexions with the Orbitnbsp; table (vertical axis). This permits the total axes free rotation. MECHANICAL STRUCTURE ( ORBIT) It Is constructed in rugged electro-welde ...
used
internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...
used
core drilling diameter max.: 50 mm bore depth: 2000 mm swing diameter: mm drilling capacity diameter max.: 110 mm total power requirement: 30 kW weight of the machine ca.: 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features Machine consists of the following elements: ...
used
KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...
new
Kronborg KM Mark 5 Fish gutting machine Condition: Overhauled in 2021 The Jutland Kronborg Fish Gutting Machine is designed for gutting fish such as cod, saithe, haddock, whiting and hake on board trawlers as well as in land-based factories. It is also suitable for river types of fish like a carp. The fish is placed continuously in the feeding chamber, there a conveyor belt with catches transports the fish through a positional system of guiding plates to the gutting chamber. The rotating knife cuts the fish as required. After having been cut, the fish passes a rotating nylon brush and water sprays which remove the last entrails. The gutted fish is led to the outlet end for further transportation. Due to the small size and weight, this machine can be used on vessels of the coastal fleet and shore plants. Capacity: 40 fish per minute Size range: 30-75 cm Power consumptio ...
used
Wide belt sander Boere TKKC+BKKC 1100 (bottom/top) Technical specifications: Machine type TKKC+BKKC 1100(bottom/top), in good condition, flow processing machine, with through-going feeder in machine. Motors number 6 works above the item, works beneath the item, Sanding width with infinitely adjustable speed 1100 mm Sanding rails 2 Rotating brush cleaner 2 Sanding rollers 2 Calibration milling heads 2 Sanding belt length mm 1900 Passage height max, mm 250 Hardness grade of roller in ° shore 60 Sensing of workpiece thickness mechanical Feedrate max m/min 25 Total connection kW Weight kg 6800 Machine type TKS / BKS, in good condition, flow processing machine, with through-going feeder in machine, number of motors 6, works above the item, works beneath the item, working width 1100 mm, with infinitely adjustable speed, motor size 4x15 Hp, with 2 rollers, 2 s ...
used
Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...
used
Mikrosa SASL 5 CNC (Kronos L size), complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul No hydraulic movements Application 5-axis CNC controlled in position with digital brushless motors: - working wheel axis motor with Heidenhain linear encoders - Grinding wheel and regulating wheel both with electrical axis movements - rotating axis with digital brushless motor on regulanting wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to regulate number of RPM Protection and fume extraction hood For through-feed grinding and customization possible according to customer needs. Machine refurbished, therefore possibility of testing in our warehouse, CE certification, manuals, 12 months warranty. The machine is visible working in our warehouse in Gussago BS. Mimu Ma ...
used
The packaging is transported on a conveyor belt via an infeed screw into a transfer star transported. By rotating the star counter-clockwise, the The packaging is fed through at the closure gripping station, the closure is placed on the packaging set and both are transported to the sealing station. As the first phase of the bolting process a bell is placed over the upper part of the packaging, in the second phase one encloses semi-inflatable membrane the edge of the lid and in the third phase is created by a negative pressure difference a vacuum in the package, in the fourth stage the lid is tightly screwed, the membrane detaches, the bell rises and the sealed package is released from the Sealing machine transported out. The machine works with 4 capping heads, which close one after the other in a rotating process. The closures are removed from a collection container via a magazine using ...
used
The electric self-propelled machine has two rotating brushes it also works with chemicals and doubles as a wet vacuum cleaner with a rubber blade. Manufacturer: CLEANFIX Accommodating size: 1300 x 1100 x 1100 mm Rotating brush diameter: 2 x 250mm Electrical supply voltage: 24V from 2 lead-acid batteries
new
Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable f ...
used
Tool changerType of gripperDouble gripper Tool changer planevertical Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Floor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot wi ...
used
The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...
used
Code: 0191 Brand: ROBOPAC Model: ECOPLAT PLUS FRD - CE Standard Stretch wrapping machine with rotary table for wrapping pallets, boxes, cabinets and various materials with stretch film - CE Standard - Year 2013 Rotating table diameter mm 1650 Film tension adjustment Load capacity 2000 kg Max height mm 2200 Rotating plate diameter mm 1650 Clutched reel carriage FRG for adjusting winding tension Max reel size mm 500 x 300 Max reel weight kg 20 Film thickness 17/35 µm Panel with Led display and JOG parameter choiceor Table rotation speed rpm 4/10 Ascent/descent cycle - speed mt/min 1,4/4 Descent cycle only Power supply volt 220/50 Total power Kw 1,2 Overall dimensions: mm 1650 x 2550 x 2780 h Weight kg 400
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 ...
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 ...
new
Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...
GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...
used
CMC Cevenini E450 Automatic Roll Slitting machine Automatic Roll Parting Machine Age: 2012 Working width: 1700 mm Max. Roll diameter: 430 mm Core diameter: 25 – 76 mm Roll weight max.: 80 kg Cutting width: From 2 mm Cutting System: Single rotating circular knife PLC Siemens Control Panel with Touch screen Machine comes with various circular knives in different diameter Machine comes with various shafts from 25 – 76 mm core diameter Machine is cutting Adhesive foil rolls, Adhesive tape rolls, paper rolls, foam rolls or other rolls. It uses a rotating circular knife for cutting a roll in several pieces with smaller widths
used
Friction feeder brand ANKUCH model ASB. This feeder is synchronized with the speed of the machine conveyor Energy: 430v/tri plus pneumatic supply at 6 bars Machine speed: max. 240 products/min Use format: product length maxi 200 mins / min 35 mins product width maxi 110 mins Parts recently changed: welding jaw resistors, electric rotating joint, temperature regulator, power contactor for the heating resistors. Stock of new parts: Electric rotating joint Stock of spare parts: numerous used parts plus a complete feeder little used Number of shapers (format change) =>10 shapers Machine year: 1997 Last intervention by the manufacturer on the machine: Oct 2012 Machine equipped with option: an automatic friction feeder. (Automatic distribution of cards) Documentation: user manuals and spare parts for the friction feeder and for the aucotronic plus mechanical and electrical ...
used
CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51 mm X axis travel 175 mm (160 + 15) Z axis travel 550 mm Spindle speed Rpm 6000 Spindle motor Kw 12 ASA A2#5 spindle connection
GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...
GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmTool magazine, wheel, 63 pockets HSK-A63Tool magazine wheel magazine (1 wheel) with 63 tool pockets HSK-A ...
new
n°1 Cutting chamber: 340x300mm. n°2 hexagonal shafts. n°25 counter-rotating blades, blade Thickness 12 mm or n°15 counter-rotating blades, blade thickness 20 mm, n°1 gearbox with electric motor 5, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.
used
CNC LATHE Condition Used Very good condition Control type Fanuc 0i-TD X axis stroke 280 mm Y-axis travel ± 60 mm Z axis stroke 790 mm rotating diameter Ø 700 mm rotating diameter on pallet Ø 550 mm Turning diameter Ø 254-420 mm working length 637 mm Self-centering diameter Ø 250 mm Spindle connection ASA 2-8 Spindle speed 3,500 rpm Spindle power 22/18,5 Kw Spindle hole Ø 90 mm Bar passage Ø 76 mm Indexing 0.001° Tool turret 12 motorized positions Chip Evacuator Accessories
used
1 dedusting with ring ionization with the option of installing the system on an existing transport. Cleaning perpendicular to the direction of flow of the automatic spray gun. With integrated electro-mechanical linear drive. 2 compressed air-operated, rotating blow nozzles move in an oscillating manner across the direction of the workpieces. The dedusting is provided with two side exhaust hoods through which the dust-free air is removed from the workpieces. 1 ring ionization for the elimination of static charges on the workpiece surfaces, attached to the oscillating / rotating Nozzle holder, including high-voltage power pack (not in EX) with voltage display and connection cable between ionizing bar and power pack The dust extraction system must be connected to a dust extraction system, min. 5,000 sqm / h. - Producer Venjakob - Year of construction 2009 - Working width 1300 mm - Feed sp ...
used
Moving column boring machine INNSE FAC 221 for sale Technical data: - CNC: Siemens 840 D - X axis: 14.970 mm - Y axis: 6.000 mm - Z axis: 1,500 mm - W axis: 1.500 mm - V axis rotating support plane: 3.000 mm - Rotating support table dimensions: 5.000 x 4.000 mm - Fixed table dimensions: 8.000 x 7.440 mm - Maximum permissible load on the table: 120,000 kg - Spindle power: 130 kW - Number of spindle revolutions/minute: 700 rpm
new
: neu : ca. 12 Wochen ab Auftrags : Italien : 127200 € : 2518.56 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...
used
Overview This is a complete KEG line consisting of a refurbished filler, a new transport system, and a new outside washer. With a capacity of 50 - 65 KEG/ h, 30l DIN and Euro KEGs can be processed. The plant can be delivered in approx. 8 - 9 months after receipt of order. Technical details Capacity: 50 - 65 KEG/h Efficiency: 95%. Container types: 30 l DIN and Euro-KEG Fitting type: flat fitting type A Supply voltage: 230/400 V, 50 Hz Control system: SIEMENS S7 Rotating and rotating device Internal pre-cleaning station additionally purchasable Automatic dosing device additionally purchasable Scope of delivery Refurbished KEG interior cleaning and filling machine | M+F KEG-Technik | MINOMAT A5/5 New KEG exterior washer | M+F KEG-Technik | AW 1150-H KEG transport system
used
Technical data of used Schiess Froriep Boring Machine: CNC: Siemens 840 D Maximum transversal travel X axis: 13.770 mm Maximum vertical travel Y axis: 5.000 mm Z axis: 1.780 mm W axis: 950 mm V axis rotating support plane: 2.000 mm Rotating table dimensions: 5.000 x 3.500 mm Fixed table dimensions: 7.500 x 4.300 mm Maximum permissible load on the table: 120 ton Spindle power: 100 kW Spindle revolutions per minute: 710 rpm
used
(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to custome ...
used
• For the packaging of products in three-side sealed tubular bags made of half-tubular films (PP, PE, PVC). • Output max. 40 products/min • Product sizes min. (l x x h) 100 x 50 x 10 mm, product length unlimited • Infeed conveyor w 350 mm, l 2,000 mm • Welding width max. 380 mm • Infeed height max. 200 mm • Film width max. 550 mm • Foil roll diam. max. 350 mm • Film thickness 15-50 ym • Longitudinal and transverse sealing • Residual film rewinder • Print mark control • Perforating unit • Automatic operation via light barriers • PLC Siemens S5-100 CPU 103 • Lauer control panel • Drive 400V/50Hz/6kW • 2 spare welding bars • Shrink tunnel SC 4030 SD • Throughput width 450 mm, throughput height 300 mm • Roller conveyor, bars adjustable rotating/non-rotating • 2 heater fans • power 18 kW, contactor control
used
Key data: 1300 mm, 2 , 160 mm
Wide belt sander Bütfering SWT 525 QC Optimat Working width 1350 mm Number of aggregates 2 1. Transverse grinding unit with -Inside running felt ribbed tape - infinitely variable, frequency-controlled cutting speed 2 – 16 m/s. -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Belt blow-off device, workpiece-controlled 2. 1 combined grinding unit with: • Automatic aggregate locking - infinitely variable, frequency-controlled cutting speed 2 – 18 m/s. -an automatically adjusting, profiled steel contact roller, with grain compensation for calibration -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Grinding insert 110 mm wide • Co-rotating and counter-rotating device of the abrasive belt -Strip blow-off device, workpiece-controlled (one blowing rod each for co-r ...
used
Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg
used
Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Mondiale, lead and feed spindle lathe type Celtic 20 -Turning length: 1700 mm -Swivel Ø over bed: 520 mm -Rotating Ø without bed: 760 mm -Rotating Ø over support: 286 mm -Spindle bore: Ø 60 mm -Spindle speeds: 12 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 2990/1000/H1270 mm -Weight: 1667 kg
used
Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Remark: the lead screw is missing (for thread cutting) -Manufacturer: Arad Elite, type ES 710 -Distribution: Andras Plum -Turning length: 2120 mm -Swivel Ø over bed: 780 mm -Rotating Ø without bed: 1000 mm -Rotating Ø over support: 400 mm -Spindle bore: Ø 83 mm -Spindle speeds: 8 - 1250 rpm -Three-jaw chuck: Ø 400 mm -Quick change: Multifix steel holder -Tailstock mount: MK5 -Drive motor: 18.5 kW -Dimensions: 4000/1450/H1430 mm -Weight: 4900kg
used
GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-63A DIN 69893 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minDirect measuring systemDirect path measuring systemSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel ra ...
used
- Automatic rotating head - 4 Axis (3 + 1) X = 880 mm Y = 630 mm Z = 630 mm MillPlus iT Heidenhain control Main spindle Rotational speed (range) - 20 - 12,000 min / -1 Available power = 15/10 kW Torque 130 Nm Spindle taper HSK A63 Head rotation angle = -10 to 91 ° WORKTABLE: Area 1,250 x 700 mm max. table load = 700 kg TOOLS MAGAZINE: Number of items = 32 max. tool diameter = 80 mm max. diameter with an adjacent free socket = 130 mm max. tool length = 300 mm max. tool weight = 8 kg Axis speed: Working feed = 1-15,000 mm / min Rapid travel = 30 m / min Machine weight 8 t Machine dimensions 4.0 x 4.0 x 2.5 m chip conveyor swivel head automatically BLUM laser tool measuring system Renishaw measuring probe Rinsing system Rotating window Remote control
used
Key data: 40
Extruder 2 co-rotating screws: 40 mm Ø diam, 35 L/D, brand: Comac, motor: 37 Kw (50 hp) with variable speed drive, year: 1992. Designed to provide exceptional performance in the production of plastic materials. Its powerful 37 kW (50 hp) motor with variable speed drive ensures efficient and versatile operation. The Comac brand is synonymous with quality and durability in the industry, and this extruder is no exception. If you're looking for a reliable machine that has stood the test of time, this may be the perfect choice for your extrusion process. Contact Gester today for additional details on this Comac 2-screw co-rotating extruder and how it can improve your recycling and extrusion operations. Trust in the experience and quality we have been offering for more than three decades.
used
Used Shrink Wrapper Zambelli LFT 30 S F Manufacturer ZAMBELLI Italia 2008 Model LFT 30 Capacity 30 packs min Working hours only 2 100 Packer is for PET bottles only 1 5 2 0 2 5 l packs 3 2 Not for smaller bottle volumes Packaging with foil without pad The machine is still connected Preserved in good condition General Description Machine for packaging in heat retractable material continuous movement no sealers Latest generation for medium and high production levels Maximum speed depending on machine model type of product and bundle to be formed Unique design features in this type of machine no mechanical parts on the operator side thus giving great accessibility mechanical parts grouped on opposite side to operator thus making all routine and non routine maintenance jobs simpler and faster Used Shrink Wrapper Great range of choice both in formats and versions Simple and very quick format ...
used
PALLET STRETCH WRAPPER ROBOPAC ROTOPLAT 2000 PALLETTIZER ZECCHETTI P 50 B Rotating platform on Zecchetti roller conveyor Machine type Stretch Wrapper Manufacturer Robopac Model PALLET STRETCH WRAPPER ROBOPAC ROTOPLAT 2000 PALLETTIZER ZECCHETTI P 50 B Year 1993 Speed 10000 Pallets per hour Formats 0 25 L 0 33 L 0 375 L 0 5 L 0 75 L 1 0 L 1 5 L 2 L Condition In storage Safety features Yes Manuals Yes TECHNICAL SPECS Operating type Rotating Table Supported pallet dimensions Eur Epal pallet 800 1200 mm Cp1 1000 1200 mm Cp2 800 1200 mm Cp3 1140 1140 mm non reversible Cp4 1100 1300 mm Cp5 760 1140 mm Cp6 1200 1000 mm Cp7 1300 1100 mm Cp8 1140 1140 mm with central hole Cp9 1140 1140 mm reversible [...for more information send your inquiry to the seller.] refno: AV09
used
Used complete line for fruit vegetable processing up to 2 5 tons ph The Complete line used for processing fruit and vegetables up to 2 5 tons per hour represents a significant innovation in the agri food sector With a 2017 18 production year this line has been designed to maximize efficiency and quality of the finished product Reception of fruits and vegetables Barboter The process begins with the receipt of fruits and vegetables using the Barboter system from the manufacturer PIGO This component has a capacity of 2 5 3 tons per hour It is crucial to ensure that incoming products are adequately prepared for subsequent stages Inspector Next the fruit and vegetables under go thorough inspection This phase is managed by a system from the manufacturer PIGO The equipment has a width of 80 cm and a length of 5 m allowing detailed control of the products Cutter The cutting phase carried out by ...
used
General SKU049Z226 LocationBarneveld MakeGlatt AG Pratteln TypeWST-CD 120/200 No.101015 Year of construction1991 Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pancheck Capacity500 Ltr Pan sizesdia. 1200x550mm, Pan with rotating bowl-mesh Capacity120-300 KG per batch Can be heated by steamcheck Without fancheck With dust filterAir Handler Unit MaterialStainless steel 1.4401 (316) Information With switchgearcheck Total height7,5 M Extra Specifications- With product discharge silo - With rotary valve for discharging and dosing - With CIP cleaning unit Technical specs Extra informationPan with rotating bowl-meshFluid bed dryers batchGlattDryers > Fluid bed dryers batchBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...
used
General SKUR1382 LocationBarneveld MakeHosokawa Mikropul (D) TypeACM 10 No.600088063 Main Features Motor15 KW Inlet diameter50 mm Specified Features - Classifier mill Grinderclassifying fine impact mill 2 Driven rotorscheck Rotor sizedia. 195mm Grinding room sizedia.330x130mm Pin diameter10mm (16x) With grinding trackcheck Inletdia. 220mm rotating valve to inlet 50mm Feeding with rotating valvecheck Motormill 15,0 kW, classifier 3,0 kW , 380 Volt Classifier Mills MaterialMild steel Information Year of construction1988 Mounted on framecheck With switchgear(as is) Floorspace1,5x1,9 M Total height1,2 M Weight900 Kg Extra Specificationswith ventilator, explosion valves and noise reduction pipeClassifier millsHosokawa MikropulMills > Classifier millsBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...
used
NAKAMURA WT-150 cnc lathe 1 USED CNC LATHE NAKAMURA WT 150Y - Year: 2004 -Max swing over bed : 190 mm - Standard machining diameter: 309 mm - Max machining length: 550 mm - Diameter bar capacity main spindle : 51 mm - Diameter bar capacity sub spindle: 41 mm - Main spindle power: 15 kW - Sub spindle power: 11 kW - Spindle speed: 6000 rpm -Y Axis on the high turret - 2 Turrets / 12 stations with rotating tools Equipped with: - 1 CN FANUC 18 iT - 1 Polygon option - 1 Parts recovery - 1 Set of collets - 1 Set of fixed and rotating tool holders - 1 Chip Conveyor
used
CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51mm X-axis travel 175 mm (160 + 15) Z axis stroke 550 mm Spindle speed Rpm 6000 Spindle motor 12 kW ASA A2#5 spindle connection Spindle hole Mm 53 Turret N 24 stations Hours of work No. 6323 MT4 tailstocking Dimensions Mm 2630 x 1670x 1650 Weight Kg 4000 Complete with: User manuals CE certification
used
CNC DELECTRON AZ102 Year of construction 1997 Rotating table mm 1800 x 1600 Colgar T- slot dimension mm 28 T- slot center distance mm 250 Longitudinal stroke mm 6.000 Vertical stroke mm 2.000 Cross stroke mm 1000 Axis feed mm / 1 0: 10000 (0: 15000) Spindle diameter in the front support mm 85 Spindle taper ISO 50 Rotating axis coaxial to the ram spindle - continuous working - 360,000 Automatic universal head - vertical / horizontal - indexed ISO 50 System for tool coolant outside the spindle
used
Vertical axis grinding machine Mod. VAM RV 800, complete with diamond wheel holder plate (excluding wheel), diam. Mm 420 with abrasive sectors, low voltage electrical system. Automatic descent displayed electronically controlled, allows flattening cycles which include: roughing and finishing passes, flash hiding passes, head lifting at the end of the work cycle at the programmed starting point, recovery of wheel wear in sectors during a work cycle (we recommend the use of self-brightening sectors as the NC does not manage the diamond grinding of the wheel). The descent of the wheelhead is interpolated with the revolutions of the table. Quick for head up and down, automatic mast lubrication. 22.5 kw (HP 30) electrospindle, equipped with precision bearings with automatic play recovery. INVERTER for grinding wheel electro-spindle speed adjustment, display of rpm and motor absorptio ...
used
Control type: CC200 Number of hours: 8,000 hours Closing Closing force: 110 T Opening stroke: 350 mm Between columns: rotating table: 1,200 mm Plate dimensions: rotating plate: 1,200 mm Mini/maxi mold: 250 mm Max distance between trays: 600 mm Injection: Screw diameter: 18 mm Screw length: 18.7D cm3: 38 Bars: 2060 General: Motor power: 15KW Heating power: 5.3KW Closing weight: 10T Injection weight: Length dimensions: 2.62M Width dimensions: 1.68M Height dimensions: 4M Options: Bi metal: yes