rotating used for sale

turning length: 1500 mm turning diameter over bed: 460 mm turning diameter over slide rest: 240 mm turning dia. in gap: 650 mm number of spindle speeds: 32 - 2000 U/min. turning speeds: 12 Stk. spindle bore: Ø 58.0 mm quill stroke: 130 mm bed width: 300 mm tailstock quill taper MT: DIN 228 / MK 4 spindle taper: DIN 55027 / D 1-6 feeds - longitudinal: 0,031 - 1.7 mm/U feeds - cross: 0,014 - 0,784 mm/U voltage: 380 V total power requirement: 5.5 kW weight of the machine ca.: 1977 kg range L-W-H: 2750 x 1080 x 1370 mm Machine from a maintenance workshop current new price ~ 17.500 euros Special price on request Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RÖHM 3-jaw chuck, including replacement jaws & chuck key - foldable lathe chuck protection - MULTIF ...

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik SL 1 cycle control Year of construction: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation O above bed : 435 mm Circulation O over face slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 4-fold PARAT tool holder 20 PARAT tool holders 3 jaw chucks RÖHM Duro T 200 1 pc Rotating Lynette 0 160 mm Tailstock with extendable drill quill Coolant device Chip drip tray Operating instructions

DREHER HEAVY DUTY GRANULATOR, (photos taken before reconditioning), One machine from heavy scraps to regrind, S 60-65 SRV GF, Infeed 650 x 600 mm., solid rotor 650 mm wide 600 mm Ø, n.8 rotating knives, n.3 still knives, throughout rate 500-1.500 kg/h depending on screen, 75 kw drive, NEW electric panel, screen : bespoke to project, Machine totally reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of blower, pipes, etc., Total dimensions: LxWxH 1,36 x 2,8 (3,3 open) x 3.64, This is a hevy duty granulator especiallly constructed, for the efficient granulation of thick walled plastic parts such as, lumps, chunks, plates, pipes. One machine does the job with great saving!, It can handle very heavy parts without need of pre-shredding, installed power : 75, HIGHLIGHTS: HEAVY DUTY MACHINE

Welding fume extraction for wall mounting NEDERMANN Extraction system, Extraction fan, Articulated extraction arm Year of manufacture: 1997 Centrifugal fan series: 521 Art. No: 510521 Extraction arm series: 535 Art. Ref: 522535 Flow rate approx. 1000 m3/h Suction hose 160 mm Suction funnel 250 x 300 mm Air outlet 160 mm Extraction arm length approx. 3 metres Motor power 0.37 kW Mains connection 400 volts, 50 Hz. • Centrifugal fan with rotating arm • Extraction arm with 3 joints •Suction funnel with shutter • Bracket for wall mounting Weight 35 kg Other welding fume extractors under stock number: 60890, 61327, 61328; used

recoem GDS-150 Year of construction : 2023 Condition : New Total power : 11 kW Throughput : approx. 150 kg/h Accessories : 2,3,4 hole sieve Dimensions : LxWxH 1615x1315x2110 mm Total weight : 1300 kg A compact recycling plant with 3 rotating 2 fixed knives. The design and precision of the cutter chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, just get in touch.

General SKU297T690 LocationBarneveld MakeSchrader No.1082 Year of construction1989 Pressure Working pressure0 Bar Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume215 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Stirring vessels With paddle stirrercheck EKATO agitator type EM040 ( without mechanical seal) Closed stirring vesselcheck Capacity215 Ltr. Vessel sizesDia. 600x700 mm Dished bottomcheck Dished top sidecheck OutletDN 50 With jacket26 Ltr. Max. temperature200 °C With paddle stirrercheck EKATO agitator type EM040 ( without mechanical seal) Counter rotating stirrercheck Motor1,5 kW 220/380 Volt Speed mixing shaft80-400 rpm Information Mounted on legscheck Floorspace0,9x0,9 m Total height2,5 m Weight500 kgStirring vesselsSchraderStirring vessels > St ...

General SKU279U570 LocationBarneveld MakeSeko staubtechnik gmbh TypeCF 1-6,3 No.2112188 Year of construction2012 Pressure Working pressure6 Bar Main Features MaterialStainless steel Motor0.37 KW Surface5.7 m2 Specified Features - Envelope filter Envelope filtercheck Filter surface5,7m² Number of envelopes:6 Envelope sizes0,95m² Sizes filter chamberDia: 1100x1250mm Cleaning by air pulsecheck Mechanical rapping devicecheck Max. temperature45°C Capacity600 Bm3/hour With hoppercheck Capacity±1250Ltr. Hopper sizesDia:1100xDia: 600x450mm Air inletDN80 Air outletDN120 Dust outletDia: 180mm Outlet with rotating valvecheckDMN Westinghouse type: AL150 2 Motor0,37 kW, 219-241 volt, 380-420 volt (Ex) MaterialStainless steel 1.4301 (304) Information Total height2,2m Weight620 kg CEcheck Floorspace1,1x1,5m ATEX compatiblecheck Extra Specificationsfilter comes ...

General SKU334U822 LocationBarneveld MakeGericke TypeNBS 200/200 No.2023 Year of construction1994 Main Features MaterialStainless steel Motor1.1 KW Width180 mm Specified Features - Sieve granulator Gratercheck Rotor sizesDia: 180x200 Sieve sizesDia: 200x200 Sieve perforation3mm Inlet200x200mm Outlet200x200mm Motor1,1kW, 220/380Volt, 920rpm. Speed920 rpm Sieve granulators Rotating sievecheck Sieve sizesDia: 200x200 Outlet200x200mm With inspection hatchcheck Speed920 rpm With sieve cagecheck MaterialStainless steel 1.4552 Information Total height0,30 m Weight100kg Floor space0,75x0,32 mSieve granulatorsGerickeSieves > Sieve granulatorsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU221U127 LocationBarneveld MakeAVA-Huep GmbH u. Co. KG TypeHVW-VT 300 Mach.No.2006-192 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket15 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume492 Ltr. Motor7.5 KW Specified Features - Conical dryer Conical dryercheck Mixing shaft with ribboncheck Capacity492 Ltr. Largest cone diameter880 mm Cone height940 mm Dished topcheck Stainless steel armcheck Top drivecheck Motor7,5kW, 400/690 Volt, 1440 rpm. (EX) Cantilevered screwcheck With jacketcheck 27 Ltr. and 2 Ltr. Max. temperature-20/200°C Bottom outletcheck Internal side is polishedcheckground Ra < 0.8 µm and electropolished Suitable for liquid/pastecheck MaterialStainless steel 1.4404 Information Year of construction2006 Mounted on framecheck Total height5,24 m CEcheck Floorspace2x1,6 m Wei ...

General SKUR0246 LocationBarneveld MakeHosokawa Alpine TypeZirkoplex 100 ZPS No.P1 140072/1 Main Features Motor4 KW Inlet diameter85 mm Specified Features - Classifier mill MaterialStainless steel 1.4571 (316Ti) Classifier Mills GrinderZirkoplex Classifier mill InletDia: 85mm Feeding with rotating valvecheck Hosokawa, type ZSA-200 V4A easy clean: 15 rpm Motor4 kW 230/400 Volt (Ex) , 3 kW 230/400 Volt (Ex) Speed4 kW motor: 860-4300 rpm, 3 kW motor: 1150-5800 rpm Information Year of construction2004 Mounted on framecheck With switchgearas is Total height4,5 m CEcheck Floorspace2,2x4,2 m ATEX compatiblecheck Extra Specificationswith: : radial fan: KIEKENS HKEN 100100 S, motor: 11 kW 400/690 Volt, 3000 rpm. air cooled chiller: Rehsler TEA 051, 6 bar, ambient temp.: 5 - 40 °C, material 1.4408 dosing screw Hosokawa Alpine PDD30, 0,37 kW, 10-174 rpm., :material 1 ...

General SKU316S1049 LocationBarneveld MakeJ-Tec Typeunknown missing type plate Main Features MaterialStainless steel Volume1065 Ltr. Specified Features - Bag dump station MaterialStainless steel Bag dump stations Silodosing system Closedcheck Capacity± 1065 Ltr. Sizesdia. 800x1800 mm Diameter800 mm Cylindrical height1800 mm Conical height1000 mm Conical bottomcheck Flat topcheck With covercheck Inlet720x520 mm Outlet with valvecheck (rotating valve: 0,55 kW 230/400 Volt:) Outletdia. 240 mm Information Floorspace1,2x0,8 m Total height3,4 m Weight350 kgBag dump stationsJ-Tec Material HandlingDosing units > Bag dump stationsBrand > J-Tec Material Handling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

General SKU316S536 LocationBarneveld MakeJ-Tec Typeunknown missing type plate Main Features MaterialStainless steel Volume1065 Ltr. Specified Features - Bag dump station MaterialStainless steel Bag dump stations Silodosing system Closedcheck Capacity± 1065 Ltr. Sizesdia. 800x1800 mm Diameter800 mm Cylindrical height1800 mm Conical height1000 mm Conical bottomcheck Flat topcheck With covercheck Inlet720x520 mm Outlet with valvecheck (rotating valve: 0,55 kW 230/400 Volt:) Outletdia. 240 mm Information Floorspace1,2x0,8 m Total height3,4 m Weight350 kgBag dump stationsJ-Tec Material HandlingDosing units > Bag dump stationsBrand > J-Tec Material Handling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU004Y057 LocationBarneveld MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

General SKUR1226 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW No.15972 Year of construction1974 Main Features Motor55 KW Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor size710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm With hoppercheck Inlet120x400mm Feeding with rotating valvecheck Motor(2x) size unknown ca. 55 kW each Pin Mills MaterialMild steel Information Floor space2,2x3,5 m Weight5000 Kg Floorspace2,3x2,2 M Total height2,3 MPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU160P705 LocationBarneveld MakePallmann TypePP 4 No.0668145 Year of construction1968 Main Features Motor15 KW Inlet diameter400 mm Specified Features - Fine Impact Mill Turbo cone mill(1x) 2 Driven rotors(impeller & co-rotating baffle plate) Rotor sizeDia. 400mm Inlet155x100mm Motor15 KW + 7,5 KW, 380 Volt SpeedMax. 4100 Rpm, Grinding disc 1450 Rpm Fine Impact Mills MaterialMild steel Information With switchgearcheck Floorspace2,1x1,1 M Total height0,8 MFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0079 LocationBarneveld MakeFryma Maschinen AG (CH) TypeVME-12/C No.M15101 Year of construction1992 Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume12 Ltr. Motor3 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity20 ltr. (nett 12 ltr.) Vessel sizesdia.310x300mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionsdia. 20mm (1x) dia. 12mm (1x) Outletdia. 20mm With jacketcheck Counter rotating stirrercheck Motor(2x) 3 kW 240/415 Volt / 0,75 kW 415 Volt MaterialStainless steel 1.4435 (316L) Information With switchgearcheck Total height1,9 M Weight800 Kg Floorspace1,7x1,0 M Extra Specificationspart of the agitator is missing, : a shaft is mounted on which mixing accessories can be mounted. Barrel is tiltableProcessing vesselsFrymaProcessing vessels > ...

General SKU377S917 LocationBarneveld MakeNeumann & Esser TypeICM-15 No.02.300.0166 Main Features Motor7.5 KW Inlet diameter55 mm Specified Features - Classifier mill MaterialMild steel, Stainless steel Classifier Mills Grindercheck Rotor sizedia. 305 mm Grinding room sizedia. 320x70 mm With grinding trackcheck Housing dimensions dia. 315x70 mm InletDN 50 Feeding with rotating valvecheck Motor1,1 kW 380-420/660-690 Volt: 7,5 kW 380-420/660-690 Volt Information Year of construction2002 Floorspace1,25x0,85 m Total height1,4 m Weight750 kg Extra SpecificationsWith: Dosing airlock Dust collector Cyclone collector Ex barier valve TurbofanClassifier millsNeumann & EsserMills > Classifier millsBrand > Neumann & Esser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

General SKU377S919 LocationBarneveld MakeNeumann & Esser TypeICM-19 Main Features Motor12 KW Inlet diameter119 mm Specified Features - Classifier mill Grindercheck Rotor sizedia. 305 mm Grinding room sizedia. 320x70 mm With grinding trackcheck Housing dimensions dia. 315x70 mm Inletdia. 119 mm Feeding with rotating valvecheck Motor1,1 kW 380-420/660-690 Volt: 12 kW 380-420/660-690 Volt Classifier Mills MaterialMild steel, Stainless steel Information Floorspace1,45x0,85 m Total height1,4 m Weight750 kg Extra SpecificationsWith: Dosing airlock Dust collector Cyclone collector Ex barier valve TurbofanClassifier millsNeumann & EsserMills > Classifier millsBrand > Neumann & Esser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU353S829 LocationBarneveld MakeHosokawa Micron TypeACM-15 No.600088071 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill MaterialMild steel Classifier Mills Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 With grinding trackcheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts With variable speed drivecheck Speed160 - 1 600 rpm. Information Year of construction1988 Mounted on framecheck With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul :RAL 6, with spare partsClassifier millsHosokawa MikropulMills > Classifier mills ...

General SKUR1059 LocationBarneveld MakeBausch & Ströbel Maschinenfabrik (D) TypeKSF-1020 No.4755 Year of construction1979 Main Features MaterialStainless steel Motor0.25 KW Number of1 heads Specified Features - Capper MaterialStainless steel Cappers Electric capacity2 kW Motor0.25 kW 380 Volt With conveyor beltcheck With cappercheck Number of closing heads:1 Single headcheck Rotating cappercheck For pilverproof capscheck For plastic capscheck Number of closing heads:1 With motor0.25 kW 380 Volt With vibratory feed bowl(2x) With conveyor beltcheck Belt width80mm Information With switchgearcheck Total height2,0 M Weight1500 Kg Floorspace4,0x1,2 M Extra Specificationswith additional format parts: Round 31.5mm, Round 50mm, Round 51.5mm, Round 67mm, Round79mm, Square 53mm, Square 53mm Bottle feeding and sealing machine, without filling installation CappersBa ...

General SKUR1090 LocationBarneveld MakeKek Gardner (UK) TypeCM680 No.CM680 B45378/1 Year of construction2009 Main Features MaterialStainless steel Motor18.5 KW Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesdia. 660x190mm Sieve sizesdia. 660x180mm Sieve perforation5x5mm Inletdia. 250mm Outletdia 300mm Motor18.5 kW 400/690 Volt Speed326 rpm With extra sieves(1x) 5x5mm Information Total height1,8 M Weight1200 Kg Floor space2,0x1,3 M Extra SpecificationsUsed for wet milling 300 Kg/h Including a TBMA Europe rotating valve type H-AR-150-1 Sieve granulatorsKek GardnerSieves > Sieve granulatorsBrand > Kek Gardner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...

General SKU237S137 LocationBarneveld MakePignat (FR) Type25 Ltr No.20403081 Year of construction2004 Main Features MaterialGlass Volume25 Ltr. Motor0.37 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity25 ltr. Vessel sizesdia. 290x500mm Dished bottomcheck Dished top sidecheck Outletdia. 15mm With jacketcheck Max. temperature150 degr. C Counter rotating stirrercheck Motor0.37 kW 230/400 Volt (2x) Speed mixing shaft137 rpm / 60 rpm Glass Reactors MaterialGlass Information Mounted on legscheck With switchgearcheck Weight200 Kg CEcheck Floorspace1,0x0,8 M Total height1,8 MMinerals & inorganicAPIGlass-lined ReactorsPlastic & polymersBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsBiotechnologyRubberLubricants & oleoOther chemicalFine chemicalsCosmeticsOther pharmaceuticsDetergent & surf.OintmentsGeneric medicinesPaints & coatings ...

General SKU066A334 LocationBarneveld MakeHalvor Forberg A/S Larvik Norway TypeFT-200 No.S12-94 Year of construction1994 Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Paddle dryer Paddle dryer(1x) Double shaftcheck Capacity200 Ltr. Trough sizes1000x850x950mm ManholecheckInspection hatch 785x410mm Outlet790x140mm (2x) Motor5,5 KW, 380/660 Volt MaterialStainless steel Information Mounted on framecheck Floorspacedryer 1,7x1,6m Total heightdryer without filter 2,5m Extra Specifications- Dryer equipped with Forbergs PMS Pin Mill System = 2 high speed rotating shafts with welded pins - Heat exchanger and fan are missing - With nozzles for liquid injection - :With envelope filter Minerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedOther chemicalStarc ...

General SKUR0232 LocationBarneveld MakeDrais Werke GmbH TypeT-2000 SM No.52000 Year of construction1985 Pressure Working pressure8.2 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor24 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2118 Ltr Useful capacity2000 Ltr Trough sizesdia. 1200x1900mm Inletdia. 170mm Top connectionsdia. 80mm (2x) , dia. 100mm (1x) Outlet200x200mm Glands air purgedcheck Motor24 kW 380 Volt Speed mixing shaft34 rpm MaterialStainless steel 1.4541 (321) Information Total height1,7 M without filter Weight6000 Kg Floorspace4,2x1,5 M Extra Specificationsincluding rotating valve J. Engelsman AG type 400 V2A nr 6648 year 1985, motor 0.75 kW 220/380 Volt inlet dia. 290mm including filter brand Bucher type AJN 304S content 5200 Ltr. max 100 degr. C height filter 3.7 M dia. 1.6 M. Powder turbo mixersDrai ...

General SKU353S828 LocationBarneveld MakeHosokawa Micron TypeACM-15 No.600880072 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 Without sieve cagecheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts Speed160 - 1 600 rpm. Classifier Mills MaterialMild steel Information Year of construction1988 Mounted on framecheck With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul :RAL 6 Classifier millsHosokawa MikropulMills > Classifier millsBrand > Hosokawa Mikropul What you can expect from ...

General SKUR1083 LocationBarneveld MakeDynamic Air (USA) TypeBella B320E-XN No.1096976 Year of construction2009 Main Features MaterialStainless steel Volume320 Ltr. Motor15 KW Specified Features - Paddle mixer Paddle mixercheck Double shaftcheck Useful capacity320 ltr Trough sizes1325x1105x850mm With cover(2x) Inletdia. 260mm (1x) dia. 115mm (1x) dia. 100mm (1x) Outlet1200x160mm (2x) Glands air purgedcheck Motor15 kW 380-420/660-725 volt (2x) Speed mixing shaft112 rpm MaterialStainless steel 1.4404 (316L) Information Total height1,7 M Weight1000 Kg CEcheck Floor space2,6x1,4 M Extra information This Fluidized Zone Mixer features an original design that achieves high fast, capacity, thorough, precision mixing of either dry bulk solids or liquids with solids. All particle sizes, shape or density can be used. The materials are mixed with fast, efficient and gen ...

General SKU377S918 LocationBarneveld MakeNeimann & Esse GmbH TypeICM-19 No.702331 Main Features Motor15 KW Inlet diameter119 mm Specified Features - Classifier mill Grindercheck Rotor sizedia. 305 mm Grinding room sizedia. 320x100 mm Without sieve cagecheck Housing dimensions dia. 315x70 mm Inletdia. 119 mm Feeding with rotating valvecheck Motor15 kW 380/420 Volt, 1,1 kW 380/420 Volt Classifier Mills MaterialMild steel, Stainless steel 1.4301 (304) Information Year of construction2006 With switchgearas is Floorspace1,3x0,8 m Total height1,6 m Weight1650 kg Extra SpecificationsWith: Dosing airlock: NEA RAL 125/12/0,526 PSR 11, 0,55 kW, Dust collector Cyclone collector NEA CAR P 19-178/397 Air intake coller: airflow: 19 m³/min, air in: 35 °C at 60 % rel. humidity, air out: 11 °C at 100% rel. humidity, water in/out: 8°C / 11 °C Ex barier valve TurbofanC ...

General SKU245P306 LocationBarneveld MakeHosokawa Alpine Type160 UPZ No.6667 Year of construction1995 Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill MaterialStainless steel Fine Impact Mills Grinderplate beater Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Information Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterFine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU004U068 LocationBarneveld MakeThyssen Henschel TypeTK/D 125 No.850026 Year of construction1993 (has never been used) Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume7.5 Ltr. Motor15 KW Specified Features - Cold mixer Cold mixerContinuous high speed mixer (1x) Capacity7,5 Ltr Vessel sizesdia. 125mm Max. temperature200 Degr. C. With jacket(2,5 Ltr) With motor15,0 KW + 5,5 KW, 500 Volt (Ex) Rotor speedOuter mixing tool 60-2000 Rpm/Inner 1500 Rpm MaterialStainless steel 1.4541 (321) Information Mounted on framecheck Floorspace3,5x0,5 M Total height1,0 M ATEX compatiblecheck Extra Specifications- Easy clean - 2 counter-rotating mixing tools Cold mixersThyssen HenschelPlastic machinery > Cold mixersBrand > Thyssen Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

General SKU256N198 LocationBarneveld MakeGMF GOUDA TypeDisc Pastillator DP20/2 No.DP 47-2-1 Year of construction1997 Main Features MaterialStainless steel/Coated Specified Features - Belt cooler Cooling beltdia. 2000mm rotating discs (2x) With motor1,5 kW With scrapercheck Outletdia. 150mm MaterialStainless steel Information With switchcheck Weight6000 KG CEcheck Floorspace6,6 x 3,3 M Total height3,3 MBelt coolersGMF GoudaBelt coolers > Belt coolersBrand > GMF Gouda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR1227 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW Year of constructionunknown, manufacturer plate is missing Main Features Inlet diameter710 mm Specified Features - Pin Mill MaterialMild steel Pin Mills Pin disc millcheck 2 Driven rotorscheck Rotor sizedia 710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm Inlet120x400mm Feeding with rotating valvecheck Information Floorspace2,3x2,2 M Total height2,3 M Weight3500 KgPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 500 mm, 800 mm

Machine Details Stock-No. 1105-03989 Type of machine CNC Lathe Make SPINNER Type TS 66 L SMC Year of manufacture 2004 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Delivery time according to the arrangement Freight base from location Technical details turning diameter 500 mm turning length 800 mm control FANUC 18 ITB Sinumerik Rapid traverse 15/24 mm/min weight of the machine approx. 6 t dimensions of the machine approx. 4.2 x 2.0 x 2.1 m Additional information CNC Lathe Spinner ts 66 l smc WITH SUP SPINDLE AND LIVE TOOLS C AXIS X-axis: 240mm Z-axis: 640 mm C AXIS MAIN Spindle 5000 RPM SUP SPINDLE 6000 RPM Spindle nose: A6 Bar opening: 65 mm Torque: 175 Nm revolver 12 SPEED VDI -------------------- Number of tool stations: 12 Toolholder: VDI 40 Number of rotating tools: 12 Speed: 5,000 rpm Torque 36 Nm 10 LIVE TOOLS BAR ...

: neu : ca. 8 Wochen ab Auftragse : 11365 € : 232.98 € : 40 mm : MK 4 : 350 mm : 132-194-277-319-466-666-8 U/min : 2.2 kW : M33 : 755 mm : 480 mm : 2280 mm : 490 kg : 0,1 - 0,2 - 0,3 mm/U : 150 mm : 80 - 880 mm : 1225 mm : 480 x 480 mm : 175 mm Automatic feed with mechanical clutch Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark ALTERNATIVE: Version BX.40mit elektromagnetic clutch € 13.190,00 OPTIONS: Electronic speed variato with speed digital reader(VE+TAK) € 1.265,00 A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-106 ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10610 € : 217.51 € : 40 mm : MK 4 : 350 mm : 132-194-277-319-466-666-8 U/min : 2.2 kW : M33 : 755 mm : 480 mm : 2280 mm : 150 mm : 80 - 880 mm : 1225 mm : 480 x 480 mm : 175 mm Manual feed Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark OPTIONS: Electronic speed variato with speed digital reader(VE+TAK) € 1.265,00 A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader (LBC) € 620,00 Manual tapping system (IR/RS) € 785 ...

General SKU368U993 LocationBarneveld Makehaagen & Rinau No.851 4331 Year of construction1993 Pressure Working pressure2 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2614 Ltr. Motor55 KW Specified Features - Processing vessel MaterialStainless steel 1.4571 (316Ti) Closed stirring vesselcheck Capacitynetto 2000Ltr (bruto 2614Ltr.) Vessel sizesDia. 1380 mm Conical bottomcheck Dished top sidecheck With covercheck ManholeDia. 450 mm Top connectionsDn100, DN25, DN11 OutletDN50 With jacketcheck Max. temperature151°C With paddle stirrercheck agitator with mating blades and with scrapers Counter rotating stirrercheck Motor15kW, 380Volt. Speed mixing shaft6,3-38rpm With homogenisercheck 500-2540rpm Motor55kW, 380Volt Information Mounted on legscheck Weight± 8000 kgProcessing vesselsUnimix H&RProcessing vessels > Processing vessel ...

General SKU254S209 LocationBarneveld MakeAVN Apparate, Filterund Anlagenbau (D) No.5379-4 Year of construction2015 Main Features MaterialMild steel Surface7 m2 Specified Features - Envelope filter Air intakedia. 100mm Air outletdia. 200mm Bag dimensions1100x400mm (envelope model) Capacity308 m3/h Dust outletDN250 Filter surface+/- 7 M2 Funnel dimensions1300x800x1000mm Motor4 kW 400/690 volt Number of bags8 Outlet with rotating sluiceJaudt rotary valve type 6301 (2015) DN250 Sanitisationcheck With fan4 kW 400/690 Volt Envelope filters MaterialMild steel Information Mounted on legscheck Floorspace2,0x1,4 M Total height3,0 M Weight950 Kg Extra Specificationsincluding 4 pieces Eicholz dust collectors of stainless steel type 45 ltr. equipped with DN150 butterfly valve Envelope filtersAVN Apparate- Filter und AnlagenbauDust separators > Envelope filtersBrand > AVN ...

Field of work: cube mm. 600 600 600 Complete with rotating daisy A N. 7 Pallets + 1 Pallet loading / unloading place Electro spindle 27,000 rpm - HSK A / 50 + N.1 connection Spare electrospindle Tool magazine with 260 positions - complete with N. 250 spindle HSK A / 50 with identification Balluf pads

Used production cell MCM CLOCK 1000 FMC N ° 1 machining centers - 4 axes, 16 pallets of 630x630 STROKES: X = 940 mm - Y = 700 mm (from +90 p.t.) - Z = 800mm Shuttle for feeding and storing 18 pallet places on two floors N ° 1 place for loading / unloading pieces with video terminal 148 ISO 50 tools with BALLUF Coding High pressure system through the variable 65 bar tool Scraping chip conveyor Marposs probe for dimensional checks, zero piece etc. Tool integrity check by laser CNC FANUC 16M JFMX 2.0 LINE SUPERVISOR (2017 update) 360 divisions rotating table (indexed) Spindle: 8,000 rpm, variable preload, 25 Kw, (S1) Optical lines pressurized on all axes Year of construction 1997 MANUALS and diagrams

CNC Year of construction 2006 FANUC CNC CAPACITY: -Maximum rotating diameter on the bench 685 mm -Maximum diameter on the carriage 510 mm -Maximum turning diameter 400 mm -Distance between the tips 676 mm AXES: -X axis travel 240 mm (200+40) -Z axis travel 640 mm SPINDLE: -Rotation speed rpm 50-3500 -ASA 8” A2 spindle connection - Internal diameter of the spindle hole 86 mm -Bar passage 77 mm - Self-centering diameter 210/250 mm -Spindle motor power 30 min/continuous kW 25/18

T MAST ROTATING TABLE Table surface 3200 X 740 Table longitudinal stroke 3000 mm Ram cross section 1000 mm Head vertical 1000 mm Column cross section 1200 mm Main spindle ISO 50 power 22 kw N 2 speed ranges from 250 to 958 rpm and from 958 at 2500 rpm Total machine weight 18500 kg

fully automatic punching shearing machine consisting of MD Automatic bearing with 6 levels Punching unit with shears IA Stripping unit with 2 tables Various spare parts Punching head H2 with 4 rotating stations and 5 embossing stations Box for small parts Output in tons per year 600000 Kg Largest possible format 3000x1500 in sheet thickness 0.75/0.88/1.00/1.25/1.50/2.00 mm steel aluminium up to 3.00 mm Max. punching diameter is unlimited for nipples, fixed tools have a maximum diameter of 60 mm. Stroke per tool is 200 milli seconds. Max weight of work piece is 3000x1500x2 mm steel. Tools are 60 pcs 7 ton stations / 4 pcs 26 ton stations / 4 pcs 12 ton stations 360° rotatable.

Automation cell consisting of a Zimmer & Kreim Genius 700 die-sinking EDM system and the Chameleon handling system. - Travel: 400 x 350 x 350 mm - Table: 575 x 500 mm - Workpiece weight: 700 kg - Generator Genius 700 with automation Chameleon - 52 amps generator power - Rotating spindle - Internal controlled heat exchanger - Fire extinguishing system Kraft & Bauer - Extraction unit - Control unit for automated or manual pallet carriers - EROWA quick-action chuck ITS Automation system Chameleon with: - Chameleon base unit - 2 x rails - 2 x magazine - 195 electrode positions ITS EROWA - 10 UPC pallet positions EROWA or PARTOOL - 1 loading drawer - Identification system - EROWA double rotary gripper ITS - EROWA pallet gripper UPC / PARTOOL Process control system - JOBmodEDM - PROGmod - Comfort database - IDENTmod - SUPmod

Tecom extruder rotating head, inverter motors consumption in operation 9kw/h Productive yield 40Kg/h. Integrated castle, motorized tow adjustable in height and modified for sheds up to 4m. Mixer, dryer, automatic master doser, UV ray printing treatment. New wiring and thermoregulators. Band min 18cm Max band 80cm Bivalent screw: extrudes HD/PLT/BIO COMPOST Visible under power in Italy

Filling line, closed and grouped 18 pistons MANZINI-COMACO Description Filling line, closed, grouped and box maker for jugs MANZINI-COMACO The filling-capping unit constitutes a group of automatic operation consisting of: A volumetric filler with 18 product delivery valves, suitable for filling metal or plastic containers, cylindrical or molded, with all kinds of liquid or semi-liquid products, food and non-food. A capper equipped with a rotating head with 6 pistons, suitable for closing, by covering, metal and non-metallic containers, shaped cylindrical or molded. Dimensions of the admitted containers: Diagonal max. mm. 190 Diameter max. mm 173 Height min. mm. fifty Max height mm. 300 Maximum production per hour 4600 E / H Dosing capacity. DC. 5700 Agrupador de garrafas Brand Apsol Type, DFM2 Year 2006 Positioner Robot of bottles Brand Apsol type, RCP 2 Year 2006 Trainer of boxes Mark ...

The biconical type mixer makes a homogeneous mixture of solids. The mixing process is a common operation in manufacturing for the health, food, chemical, cosmetics, detergents, fertilizers and plastics industries. Some examples are pharmaceutical granules, flour semolina, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations for making dehydrated creams and soups, foliar waxes, granulated detergents, soap flakes, artificial fertilizers, powdered plastics or shredded, plastic pellets and fiberglass, etc. The Bicono mixer for solids has a rotating biconic drum that rotates at low speed, making the product slide smoothly along its smooth interior walls, making the product unforced. Characteristics: Repetitive, reproducible and scalable mixes. Low maintenance mixer. Extreme ease of cleaning. Total emptying of  ...

WESTFALIA separator decanter centrifuge with electrical panel Description Decanters are a very efficient means to carry out solid-liquid extraction with a high content of solids. Before entering the decanter, the extraction product, previously ground, ground or ground, is intensively mixed with the extraction agent in a separate mixer. The inlet through which the suspension flows into the decanter is arranged axially relative to the rotating bowl. The solid wall vessel has a cylindrical section for efficient clarification of the liquid and a conical section for dewatering the solids. The spiral, which rotates with a slight difference in speed with respect to the container, conveys the solids (extraction residue) to the solids discharge at the conical end of the container. The extract is transported to the cylindrical end of the container where it is discharged through a pump. High dri ...

: neu : 2024 : 3981 : prompt, Zwischenverkauf v : Spanien : 10830 € : 222.02 € : 1 : 35 mm : MK 4 : 300 mm : stufenlos 100 - 2.000 U/min : 3 kW : bis M 27 : 1100 mm : 600 mm : 1950 mm : 360 kg : 0,10 / 0,20 / 0,30 (3) mm/U : 150 mm : 125 mm : 90-890 mm : 1250 mm : 480 x 480 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE column drilling machine with vario gear 1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display 3 automatic feeds chuck guard left-right drilling T-Slots and integrated coolant equipment in base stand integrated lighting drill guard MOVABLE, ROTATING AND TILTING TABLE WITH T-SLOTS reverse for tapping fast and precise setting and control of the speed without switching operations and without defined levels more particularly robust parts for wear resistant operation and smooth running compact design with high performance ...

Disperser with electronic speed variation diamac d 50 Disperser with electronic speed variation diamac d 50 Like new, never used, including auger for pouring powders and raw materials. The machine is sold including the auger (price agreements will be negotiated during the negotiation phase) CONSTRUCTION FEATURES Supporting metal structure Locking system adjustable bowl with tightening straps Dust and vapor tight cover, with dust loading hopper. Hydraulic lifting via control unit incorporated in the structure Lifting piston with non-return valves and flow regulator AISI 304-316 stainless steel mixing shaft V-belt and pulley transmission Impellers Cowless type in stainless steel. Aisi 304 stainless steel or chromed Main electrical panel with driving inverter including filter and anti-interference inductance Normal or ATEX type machine side control pulpit. Industrial or AT ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 5410 € : 111.99 € : 18 mm : MK 3 : 250 mm : (10) 245 - 355 - 490 - 71 U/min : M18 : 1030 mm : 600 mm : 1950 mm : 230 kg : 120 mm : 200 - 530 mm : 270 x 270 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE Manual feed Electronic variator drive Fixed base with t-slots, height adjustable and rotating headstock Base cabinet with doors and drawer Lightning equipment Tool ejector Emergency push button Turning sense selector CE norms Options: Tapping device (IR/RS) € 785,-- Electronic speed variator incl. digital read out (VE+TAK) € 1.265,- A) 120 - 760 B) 170 - 1100 C) 400 - 2580 D) 600 - 3800 E) 950 - 6000 1/min Digital read out for depth € 620,- Base cabinet with doors and drawer € 1.245,- Coolant equipment € 880,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 6340 € : 131.24 € : 30 mm : MK 3 : 250 mm : 65 - 3.060 (8) U/min : M22 : 800 mm : 600 mm : 1450 mm : 240 kg : 120 mm : 155 - 485 mm : 270 x 270 mm : 100 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE Manual feed Gear driven Fixed base with t-slots, height adjustable and rotating headstock Lightning equipment Tool ejector Emergency push button Turning sense selector CE norms OPTIONS: Tapping device (IR/RS) € 785,-- Electronic speed variator incl. digital read out (VE+TAK) € 1.245,- A) 45 - 125 B) 125 - 370 C) 380 - 1070 D) 1100 - 3100 1/min Digital read out for depth € 620,- Base cabinet with doors and drawer € 1.245,- Coolant euqipment € 880,- (Sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.