rotating used for sale

tool taper: MK4 diameter of tools max.: Ø 145 mm table-size: L: 800 x B: 700 mm surface area: Ø 300 mm table travel: 200 mm total power requirement: 7,5 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2,8 x 1,5 x 2,3 m Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of  ...

Beer filler, pressure filler, Vipoll GEA, type: Visipraktik VKR-ES-DN 12-3K, year of manufacture: 2013, capacity max. 3,000 bottles / hour, for 330 ml, double pre-evacuation, few operating hours Optional: Bottle transport Beer Filler, Counterpressure, Vipoll GEA, Type: Visipraktik VKR-ES-DN 12-3K, Year: 2013, capacity max. 3.000 bph, adjusted to 330 ml, double pre-evacuation, low operating hours Optional: Set of bottle conveyors, rotating table

DEMAG JC-P 1600 KG pillar jib crane manufactured in 2016 is used in supporting unloading and assembly work, as well as for machine operation in areas with limited space requirements. The compact design with increased stability is equipped with an rotating mechanism controlled by an electric inverter and a highly built-in jib, allowing for particularly high hook heights. All of this makes the DEMAG JC-P 1.6 T pillar crane ensure fast work and high safety in handling workpieces with a maximum weight of 1600 kg. Technical data of DEMAG JC-P 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 5000 mm

Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment and speed control Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Inclined doweling and stake drilling are easy to implement thanks to the rotatable drilling unit. Frequency-controlled motor with frequency converter, speed adjustment via potentiometer Motor power 1.5 kW Start of the engine with practical handle switch Precision chuck with two inserts 13 + 16mm Additional Röhm two-jaw chuck up to 20mm intake Preparation for drill heads Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated by 65 degrees to the left and right Pneumatic adjustment of the machining height, dowels on two levels without repositioning The desired drilling heights can be set fo ...

thickness of jaw: 220 mm max. clamping width: ca. 275 mm high of jaw: 63 mm weight: ca. 70 kg New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 780, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

Stove new lamps, rear door new gasket. Oven cleaned and tested. The in-store baking oven "MINI 8 RD" works with a moving baking atmosphere. A rotating axial fan mounted in the underside of the oven directs the air evenly to the baked goods via the heating rods. The special feature of the in-store oven "MINI 8 RD" lies in the second transparent baking chamber door at the back of the oven. This makes it possible to integrate the in-store baking oven into a sales counter and to enable the customer to directly observe the baking process via the glass back wall. The oven is also equipped with a fully electronic pictogram control system, which is particularly distinguished by its simplicity of operation. All functions of the furnace are taken over by this control system, and the necessary operating procedures are thus reduced to a minimum. It enables automatic baking according to programme ...

: gebraucht : 2022 : 6232 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 350 x (2)2,5 x 32 mm : 30/60 U/Min : 45 ° : 45 ° : rund 125 mm, Quadratprofi : rund 105 mm, Quadratprofi : rund 70 mm, Quadratprofil : 1,8/2,5 kW : 600 mm : 1220 mm : 1060 mm : 206 kg DEMO MACHINE - MINT CONDITION very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²) vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equiptment sawing blade protection material stop thermic and magnetic motor protection 90° longitudinal cuts are possible thanks to the rotating vice pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotating jaw set for four-jaw chucks, soft -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 140/140/H100 mm -Total weight: 8.8 kg

WEISS AGGLOMERATOR, for LDPE LLDPE HDPE PP PS PET, complete with loading belt, metal detector, dual chamber system, n.2 rotating knives on each chamber, n.2 x 160 kw drives, control panel + electric cabinet, including :, extraction blower, pipes, cyclone, bag holding structure, INSTALLED POWER: 320 kw, CAPACITY: 1.000 kg/h, PRESENT CONDITIONS: disconnected, SERVICES AVAILABLE: full reconditioning on separate offer

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Labeling Machine Krones Contiroll WrapAround 36000 bph Fully operational WrapAround OPP labeler Krones Contiroll Solomatic for plastic and paper labels feed from two rotating reels and glued with hot melt glue. Labeler was manufactured in 2007 and it has two label applicators, both with two label reels with automatic splicing from one reel to another. It is suitable for labelling glass, plastic and metal containers with wrap-around labels. Two narrow strips of hotmelt, which are applied by a heated glue roller to the leading and trailing label edges, glue the labels together. Container plates are driven by a toothed belt and servomotor. This machine has been used for 500ml PET bottles only but it can be adjusted for 500ml to 2000ml bottles as well, max diameter being 105mm. Control PLS are Siemens Simatic S7 series with color touch screens. Technical characteristics Manufactur ...

Weibert DB 460XL Vario Lathe Diameter max. 305mm Center Size x Height: 460 x 155mm Spindle head thread M33 x 3.5 MK2 3 speeds: 650-1430, 1240-2790, 1600-3800 rpm Electronically variable Rotating grain tip Four-pronged driver Swivel steel support 150mm, 300mm Clamping washer 145mm Quill adjustment: 55mm Motor 550W 230V 50Hz Dimensions (LxWxH): 900 x 340 x 410mm Net weight approx. 38kg G&STÜ-5920462

ID3093 Mastic asphalt paver / Gussasphalt-Fertiger year/Year of construction 2016 approx. 1900 hours/hours Mastic asphalt paver, paving width: 3,000 – 14,875 mm, 4-cylinder HATZ diesel engine – EU emissions standard 3B, studded roller, 4 x rotating crawler tracks, grit bunker 0.8 cbm per linear meter, 2x hydr. Side sword, radio remote control, 14 x interchangeable end pieces Mastic asphalt paver, paving width: 3,000 – 14,875 mm, engine 4-cylinder HATZ diesel engine – EU emission standard 3B, studded roller, 4 x rotatable crawler track, gravel bunker 0.8 cbm per running metre, 2x hydr. Sideboard, radio remote control, 14 x interchangeable end pieces

GeneralUniversal milling machine, with compound Guideway construction; Control: CELOS with Siemens 840D sl Operate Working area 1Cross450 mmLongitudinal500 mmVertical400 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-18000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre ...

Key data: 285 KW, 295 kVA, 400 V

Removed in rotating state With only 4,828 hours of shooting Motor is equipped with a GAC electronic regulator

x-travel: 850 mm y-travel: 600 mm z-travel: 500 mm table surface area: 1200 x 550 mm spindle taper: SK 40 control: HEIDENHAIN, TNC 121 spindle turning speed range: 36 - 1800 U/min quill stroke: 120 mm feeds: 5 - 2000 mm/min rapid traverse longitudinal: 4 m/min rapid traverse vertical: 2 m/min milling head -swivable +/-: 90 ° table rotating: 360 ° total power requirement: 12 kW weight of the machine ca.: 5 t dimensions of machine L x W x H: 2,80 x 2,0 x 2,61 m Accessories: vertical head with hydr. tool clamping and quill retraction, univ. table, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40

2 Screw Extruder Co-rotating spindles 40 mm Ø diam, 44 L/D, Brand: Maris Model: TM40 MPL/D44 Variable motor: 75 Kw (100 hp) Year: 2000. 2 x 70% replacement spindles.

(machine offered totally reconditioned - photos taken before reconditioning), TRIA PRR100 GRANULATOR, rotor width 1.000 mm., closed rotor diam.650 mm., n.5 rotating knioves, n.2 still knives, 110 kw drive, hopper mm.600 x 1.000, The machine is offered TOTALLY RECONDITIONED, NEW control panel, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery)

Partial excerpt machine description (details on request): 6 motor spindles 5.5 kW max. speed 8,000 rpm. Spindle capacity 16mm, Z 50mm stroke; 6 slides x 40mm stroke 1 carriage for counter operation, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8,000 rpm, 150mm stroke, Rotating ejector with flushing HP Numerical control Fanuc 30i Parts disposal and pneumatic Slide plastic-coated Outer distribution belt larger capacity Active rod preference device Collets type F16 for active Bar preferential device Various clamping and reduction tubes Turning Tool Holder Base (16x16) Transverse drilling unit ratio 2:1 Max. 8,000 rpm - max. 4.4 Nm Front drilling unit ratio 2:1 Max. 8,000 rpm - max. 4.4 Nm Electrical control cabinet Oil tank 1,100 litres Coolant pump 100 l/min., 4 bar Paper filter system 50 μm Fine filter system 5 μm hydrostatic circuit Hy ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

A 50 | PALLET WRAPPER ROBOPAC YEAR: 2008 SPEED: 40.000 BPH SYSTEM: ROTATING RING PROCESSED FORMATS: EUROPALLET SAFETY PROTECTIONS

Complete Bottling Line PET • Year: 2015 • Speed: 3.000 Bph • Type of product: Natural Water • Formats: 6 LT • Composed of: • Blower STM • Model: BLU LINE 3 • Number of cavities: 3 • Elevator/Orientator preform • Booster HP from 10 to 30 Bar • Compressor LP 10 Bar • Chiller • Formats: 6 L (1 Stamp available) • Triblock STM • Model: ARROW 16/16/6 NC/BIG • Rinser 16 clamps • Filler 16 valves • Type of filling: Gravity filling • Capper 6 heads - magnetic heads • Type of cap: pre-threaded plastic • Cap: 48 mm BERICAP • Automatic cap feeder • CIP Sanification 2015 • Filtration system with filters HEPA • Format of 6L included • Labeller UNO ADE (2016) • Direction: Linear • Type of labels: adhesive • Type of apply: enveloping • Handler Ersey Makina • Automatic distributor • Palleti ...

Continuous production of fresh cheese (quark) up to 50% fat in Dry Matter. The protein contained in the coagulated milk is separated from the whey in the rotating bowl and is continuously discharged through nozzles. Equipped for CIP cleaning. Machine comes with the bowl, motor (20 kW), motor cover, frame to put the separator on (± 80 cm above the floor), control panel (Allen Bradley PLC and panelview touchscreen panel) and some service tools for maintenance (not all available). Input flow rate for skim milk± 7.200 liter per hour. Output of low fat quark up to 1.500 kg/h (depending on dry matter in the quark, the composition / temperature of the coagulated skim milk and the type of nozzles used inside the quark separator)., Type of Machine: Quark separator, Capacity: 1.500 kg per hour (quark output), Bowl speed: 5.350 rpm, Motor: 20 kW - 380 V - 2.905 rpm - 37,5 A - 50 Hz, Weight: ± 1. ...

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-trade Economy BMT 2050 UH shaft grinding machine built in 2012 provides high precision and excellent machining quality of rotating surfaces with a maximum diameter of 200 mm. Technical specifications of the V-TRADE BMT 2050 UH grinding machine - maximum workpiece diameter: 200 mm - maximum workpiece length: 500 mm - power supply: 3x 400 V

DMG GILDEMEISTER CTX 310 CNC turning center was manufactured in 2002. The machine with its small size and extensive equipment can fully automate the machining process of workpieces with a maximum diameter of 390 mm while maintaining high precision and reduced operating costs. The GILDEMEISTER CTX 310 CNC lathe is equipped with a 12-position tool head, an easy-to-use SIEMENS SINUMERIK 840 D CNC controller and a reliable powerful spindle rotating at a maximum speed of 5000 rpm. The total weight of the machine is 3400 kg. Technical specifications of the DMG GILDEMEISTER CTX 310 lathe - CNC controller: SIEMENS SINUMERIK 840 D - turning diameter (in tusk): 390 mm - turning diameter (over bed): 310 mm - minimum turning diameter: 8 mm - maximum spindle rotational speed: 5000 rpm - spindle passage diameter: 50 mm - 12-position tool head - tool holder: VDI 30 - operating hours: 35979 ...

Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-fold combined model 210/13 on a rotating machine base -Pressure force: 70 tons -Drive power: 4/5 kW 1450/2900 rpm -Throat: 610 mm -Applications: punching, shearing, cutting, notching -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1865/1205/H1990 mm -Weight: 3580 kg

TRIA GRANULATOR 100-65DN, (machine offered totally reconditioned - photos taken before reconditioning), Open rotor length 1.000 mm., Ø 650 mm., n.3 rotating knives, n.2 still knives, 75 kw.drive, Electric cabinet, Constructed in 1996, offered FULLY RECONDITIONED, INSTALLED POWER: 75 kw, rotor size: 1000x650 open

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), type XT 9042, 900 mm wide rotor, Sturdy and reliable machine from this well renowned Italian manufacturer, 30 kw drive, n. 3 rotating knives + 2 still knives, screen 12 mm., prepared for extraction through blower, control panel, constructed in 2016, the machine is offered totally reconditioned, can be completed with conveyor belt, pneumatic extraction, bag filling/weighing station., Constructors description for the XT series: Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, also suitable for second step grinding of pre-crushed pieces.The granulator of this series, thanks to the special design of the cutting chamber, are also widely used for an immediate and safe in-line grinding of film and trims. The rotary discs integral with the roto ...

Used Capsuling Machine Robino Galandrino ZENITH 2 12 OTTICO Monoblock for dispensing and crimping of capsules composed of a rigid base made of fully electro welded steel coated in stainless steel Machine complete with Automatic capsule dispenser with single bell or rotating multi bells with elliptical co tilting suitable for picking up and the capsules from the storage to and placing it onto the bottle guaranteeing precision and reliability of placement The capsules before expulsion into the bell are pre extracted by a mechanical system 1 rotary carousel complete with pneumatic heads for the first closure of the sparkling wine capsule and the formation of the 4 folds 1 transfer star between the first and second carousel complete with locking pliers to keep completely the bottles in place guaranteeing the perfect smoothing of the capsule in the subsequent phase 1 rotary carousel complete  ...

New Palletizer ROBOT ARM PALLETIZER Automatic palletizing group specially designed for high speed applications with Fast Pack Formation Table at High Elevation Speed suitable for 72 000 cans hour line for 250 ml slim cans with 6 4 configuration on 1200 1000 mm pallets Package infeed height H 2000 mm Designed for pallet dimensions 1000x1200mm Max standard pallet height 1900mm Pallet transfer height H 500mm Machine is composed of Fast Pack Formation Table at High Elevation Mechanism to turn packs automatically at inlet of the palletizer according to the predetermined configuration of each layer It is controlled by the PLC and The device is equipped with a turner which turns the product of 90 if required Intermediate Table Consists of conveyor table a product pushing device to pallet lifter Driven by a geared motor The translation of the layer from the performer to the palletiser is carried ...

Used KRONES Plastic Labeling Machine Introduction The Used KRONES plastic labeling machine is a pre owned bottling machine currently housed in storage Impressively the machine offers a high speed of 15 000 BPH bottles per hour and is specifically designed for PET containers accommodating a standard format of 1 0 L Technical Features of the KRONES labeling machine At the heart of the Used KRONES plastic labeling machine are its 10 plates These plates move via a mechanical cam brake clutch ensuring precision and reliability over time Moreover the system is equipped with a single station rotating clockwise This aspect is crucial for maintaining efficiency during the labeling process Labeling Methodology The labeling method employed is Roll feed coil ensuring a consistent and uniform supply of labeling material thereby minimizing waste and enhancing operational efficiency Furthermore the lab ...

Used Bottling Line for Sale Bertolaso 7000 BPH 1999 for still and sparkling wine The bottling Line for Sale as a whole considering every component is very well maintained Clean and without obvious or compromising signs of wear The sparkling wine bottling line reaches an hourly speed of about 3000 BPH on the 0 75 formats Depalletizer The line starts with the Acmi automatic depalletizer model Rasar P130 with an electric roller pallet storage that manages the pallets automatically with two pallets waiting The maximum height of the workable pallet can reach about 2 meters The standard pallet size is 800 1200 with a height of 140 cm Automatic inter layer remover with compressed air rotating arm It has a parachute safety system that prevents the head from going down in case there is an operator It is also equipped with a perimeter barrier that blocks the machine in case the doors are opened Fi ...

Used Depalletizer Packr 2003 Manufacturer Packr Model AF611 Year 2003 Speed b h 600 Worked formats 20L cannivers Safety features Yes Manuals available Yes Maintenance documentation Yes State of machine In production Type of movement Rotating arm X Y Supported Pallet Dimensions 1200 1200 Top cover Yes PLC type Siemens range 300 Spare parts available very limited Work hours unknown Notes Production fully operational The Lenze drives are obsolete and in case of brakedown new servo system needs to be installed Covers are automatically discharged and stapled Empty pallets are stacked [...for more information send your inquiry to the seller.] refno: DEPAL30

Modular labeling machine 10 heads Modular labeling machine Cold glue 4 stations Front back seal L neck ring self adhesive 3 stations Front back neck ring Bottles round square Label stations nr N 3 self adhesive stations N 3 Cold glue stations Central diameter 960 Plates nr 10 Length of the labels min max 10 150 Height of the label min max 15 200 Container diameter height min max 30 80 mm Altezza min max 100 400 mm Plate transmission Motorized plate Optical centering Yes Special inlet stars No 3 multi format in out stars D 50 120 mm Industria 4 0 yes predisposed other request Double screw input in phase Max speed request 6 500 bph Modular labeling machine basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production  ...

Used Capsuling Machine Nortan Prisma 1996 The used Nortan capsuling machine from 1996 is an excellent choice for those looking for a reliable and performing machine With 4 heat shrinking heads and 4 rolling heads the rotating capsule picking system allows you to work efficiently reaching a production of 3000 pieces per hour on shrink wraps and 2000 pieces per hour on rolls Powered by 380 volts and with an absorption of 7 kW at 50 Hz it weighs 1250 kg and the machine enters from the left ie clockwise The dimensions of this used capsuling machine nortan prisma are 2 5 meters long 1 8 meters wide and 2 4 meters high It is also sold with a series of equipment for a cylindrical bottle and both seen and liked and overhauled and guaranteed This used Nortan capping machine is a perfect choice for those who want a reliable and high performance machine for the production [...for more information s ...

01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...

Used Labeling Machine Cavagnino Gatti 1999 The Cavagnino Gatti CG 80 is a used labeling machine manufactured in 1999 This high speed labeling machine offers exceptional performance and reliability for various labeling applications With its advanced features and sturdy construction it has become a preferred choice in the industry Key Features and Specifications The CG 80 model is equipped with five heads enabling efficient labeling operations It boasts two front and back adhesive stations as well as a glue station allowing for versatile labeling options The machine operates in an anticlockwise rotation ensuring smooth and precise label application A notable feature of the CG 80 is its rotating plate with Malta crosses providing stability and accuracy during the labeling process The entire machine is enclosed in stainless steel ensuring hygiene standards and durability Safety protections a ...

Used Palletizer and Stretch Wrapper KETTNER UM1200 14000 BPH In excellent condition the machines are still indoors so it s ready for sale immediately As requested by your total overhaul of the used equipment is at your disposal the work phases so with the bottling machines washing operation used palletizer pre assembly mechanical operation indeed with check repair with replacement of delicate parts such as bearings etc This used palletizer painting with sandblasting of interesting parts so it is keeping the same RAL Replacement of all PAL Control and compliance of the complete machine side system Electrical panel with PLC replacement indeed it uses SIEMENS OR SIMILAR Control and standardization of electrical panel with verification and replacement of Demange parts Complete system disassembly and assistance for packing and loading for transport Bottling machines delivered FOB Italy seapor ...

Used pallet wrapper Robopac 2008 40000 BPH Construction Details and Operational Parameters The Robopac 2008 pallet packer represents an engineering solution for industrial automation It s with particular attention to the handling and stabilization of palletized loads With a rotary ring system this unit handles winding operations at a quantifiable speed of 40 000 BPH The machine accepts Europallet formats integrating itself into existing processing lines and adhering to size and capacity standards This interoperability demonstrates its adaptability within already operational logistics systems Security and Maintenance Protocols in the used pallet wrapper Robopac 2008 40000 BPH Compliance with industrial safety directives is highlighted by the presence of accident prevention protections This is essential to prevent accidents during the operation of the machinery At the same time the availab ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 1.8 kg

STOKKERMILL K750 cable granulator-separator machine FROM STOCK! Manufacturer: STOKKERMILL (Made in Italy) Size: 120x120x180 cm Weight: 750 Kg Power: 7,5 Kw Capacity in input: 90-110 kg/h Table dimensions: 250x800mm Range of diameters: 1 a 35 mm Description Wire shredder for electric cables e-scrap K750 – A concentrate of techncology. Dry densimetric table cable shredder for the recycling of copper electrical wires. Wire shredder for electric cables K750 is the last model of the manufacturer Stokkermill Recycling Machinery in the segment of small solutions for the recycling of electrical cables and wires. Thanks to the accurate engineering research Stokkermill is able to offer a "small but great" machine at an affordable purchasing price with the lowest maintenance cost. Both the sizes of the mill, with 3 rotating and 2 stationary blades, and the dry densimetri ...

RAPID 300 MILL granulator exhaust fan and cyclone Manufacturer: RAPID Condition: good condition, ready for operation Electrical engine installed power: 11 kW Nr. of shaft: 1 Shaft length: 300 mm Blades: 4 rotating cutting blades/ 1 stationary blade Working space: 300 x 300 mm Sieve: yes Control panel: yes Exhaust fan: yes Cyclone: yes Input hopper: yes Weight: apx. 450 kg Uploading on the truck is free of charge. Can be inspected in our warehouse in Székesfehérvár 8000, Hungary. For further information please contact us.

Pallet wrapper -Robopack the offer includes: - Wrapping machine with rotating arm - 5 roller feeders - 1 rotary roller feeder [turntable] - 1 electrical cabinet - security fence

Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](https://drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/vi ew?usp=drive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover,  ...

Cutting line Polar 176 XT-AT-Pace, year 2010 (cutting width 1760 mm / 69.29") The machine is in a good working condition, only 1.6 mio. Cuts PACE stands for POLAR Automation for Cutting Efficiency, whereby the loading, turning and waste disposal processes are automated. The Autoturn turning gripper in conjunction with the Autotrim high-speed cutter makes it possible to automate the first five cuts (all-round with separating cut). Equipment: Polar Autotrim 176 XT-AT, Autotrans M Format 7S, Autoturn, lowerable ruler left and right, rotating saddle, Compucut and P-Net possible, ErgoFront tables, various air tables and protective grids, etc. Available: immediately Suitable accessories are available immediately and can be purchased as an option: Transomat loader3 BL 160-7S incl. chip marker and counter ruler, year 2010 Transomat unloader ER 160-6, year 2010 Pres ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg